Nokia 6110

[jafar_hoggt]

Technical Specifications

Size
-Weight: 137 g (Slim Battery)
-Dimensions: 130 x 47 x 28 mm, 130 cc

Display
-Illuminated high-contrast full-graphics display
-Up to 5 lines for text, numbers, graphics
-Dynamic display for large/small font
-Signal, battery and status indicators
-Last digit and full display clear
-Full screen cursor editor

Keypad
-One-touch voice mail button
-International access button (+)
-Keyguard
-Illumination

Call management
-Several speed dialling methods
-Call repeat
-Any key answering
-Conference calling (1+5 people)
-Call waiting / call hold
-Call transfer
-Call/fax/data divert, separate for voice and data
-Display number or name of incoming caller
-Disable/enable of number or name in connected calls
-Call grouping features
-Caller group identification with ringing tone and graphics
-Advanced tone dialling (DTMF) features
-Automatic and manual network selection
-Welcome message
-Alternate speech and data or fax

Memory functions
-50 names and numbers in phone, up to 250 in SIM
-10 last calls dialled/received/missed with time stamp
-Page function: names, numbers or both shown when scrolling memory
-Selectable phone book: viewing or editing by number, name or both
-Phone book fetch service for SMS and calendar
-Phone book listing for name, name and number, or for name big in font

Short Message Service
-Send and receive SMS messages up to 160 characters
-SMS class 0, 1, 2, 3 supported
-Return Call Type Message: easy to call number in message
-Sent message delivery report

Security and cost control
-Emergency calls without SIM card (network dependent)
-Programmable security level and code
-Various call barring possibilities
-Advice of charge
-Setting of cost limit to outgoing calls (also incoming calls if costs are invoiced)
-Last and cumulative call duration and charge
-Fixed dialling: calls to predefined numbers or prefixes
-Closed user group

Optional controls
-26 languages in factory prefixed language groups
-Automatic menu language selection if supported by SIM
-35 selectable ringing tones, SMS alert tones
-Selectable ringing volume, including Silent Alert with flashing lights
-Adjustable profiles function for different usage situations with call grouping and caller group identification

GSM data transmission -Supports 9600 bps, up to 34,400 bps if compressed
-Send and receive faxes, e-mail, files
-Data transmission with automatic error correction
-Mobile Terminated Unstructured Supplementary Services Data
-Built-in infrared link (e.g. to compatible PC, printer, another Nokia 6100-series phone)

[jafar_hoggt]

اينم بعضي از كدهاش 6110


*#0000# To view Software Version.
*#6110# Try this code if the above code doen't work.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#]
You don't need the warranty-codes any more - you can just scroll through the information like in any other menu. It has the the same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:
1: Displays Serial Number.
2: Displays the Month and Year of Manufacture (0997)
3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once - so be careful what you write...)
4: Displays the date of the last repairment - if found (0000)
6: Does anyone know if this is for upgrading the phone's EEPROM?? (Transfer user data?)

Enhanced Full Rate Codec (EFR):
On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes more power )
Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:
On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone ( better standby time )
Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone

Network Monitor
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

1.Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2.Take apart the phone.
3. De-solder the EEPROM (ATMEL AT 24C64).
4. Read out the data with an EEPROM programmer and save it to a file (Backup).
5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
6. If you have v5.24 then change the address "0378" from "00" to "FF".
7. Write the new data to the EEPROM and solder it back to the phone.
8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.