PassMark BatteryMon نرم افزاری براي نظارت كردن روي باتري ها /تمامی ورژنها در اینجا
BatteryMon يك نرم افزار براي نظارت كردن روي باتري ها ميباشد. اين نرم افزار طوري طراحي شده كه به راحتي در سيستم عامل هاي ويندوز بتوانيد مقدار بازده باتري ها را در laptop ها را تحت نظارت داشته باشيد يا هر گونه منبع نيروي خارجي.
ميتوانيد به صورت گرافيكي مقدار شارژ باقي مانده را ببينيد ، ميتوانيد مشكلات باتري ها را از روي آمارهاي مفصل كشف بكنيد ، مقدار بازده باتري ها را با مدت زمان هاي خالي شدن شارژ كه در نظر داريد را مقايسه بكنيد ، ميتوانيد بازده يك باتري را براي رجوع هاي بعدي ثبت نماييد ، ميتوانيد تنها وضعيت يك باتري را مشاهده بكنيد در حاليكه از چندين باتري استفاده ميكنيد ، نقطه تخليه بحراني را براي باتري هاي خود را ببينيد ، اين نرم افزار همچنين قادر است نوع باتري را نيز تشخيص بدهد.
BatteryMon is a battery monitoring software solution. It has been designed as an easy-to-use Windows based application that allows users to monitor the performance of laptop batteries and uninterruptible power supplies (UPS).
Graphically see the charge / discharge rate
Diagnose problem battery cells with detailed statistics
Compare and measure your batteries performance with expected discharge rates
See the critical discharge point for your batteries
Uniquely identify battery packs for tracking purposes or system inventories
Log the performance of a battery for later reference
See the status of each individual battery pack, when multiple batteries are in use
Status Information
The following information is provided for each installed battery (when available, as not all batteries will support all of these features).
Status: Indicates the current status of this particular battery. e.g., "Charging", "Discharging", "Not in use".
Manufacturer: The name of the company that manufactures the battery pack.
Device Name: This is usually the model number of the battery pack, as defined by the manufacturer.
Serial number: The serial number of the device as defined by the manufacturer.
Unique ID: An identification string, which is unique across all battery packs.
Time remaining: A rough estimate of how much time remains before the battery is fully discharged.
Battery Temperature: The temperature inside the battery pack.
Date of manufacture: The date when the battery was manufactured.
Type of use: Indicates if the batteries normal use is to provide power for normal operations or if the battery is a fail safe / backup device. (Laptop battery or UPS)
Rechargeable: Indicates if the battery is rechargeable or not.
Chemistry: The type of battery. Typical values are: Lead Acid, Lithium Ion, Nickel Cadmium, Nickel Metal Hydride, Nickel Zinc, Rechargeable Alkaline-Manganese.
Design capacity: The theoretical capacity of the battery when new. Measured in milliwatts hours (mWh) for most batteries.
Full charge capacity: The battery's current fully charged capacity. In some batteries it is possible to compare this value to the designed capacity to estimate the battery's wear.
Alert levels: The manufacturer's suggestion of when a "Low" and "Warning" battery alert should occur.
Bias: Some batteries reserve a small charge that is biased out of the battery's Full Charge Capacity and Current Capacity values to show "0" as the critical battery level. Critical bias is analogous to setting a fuel gauge to show "empty" when there are several liters of fuel left.
Charge cycles: The count of the number of charge/discharge cycles the battery has experienced. This provides a means to determine the battery's wear.
Voltage: The current battery voltage in Volts across the battery terminals.
Charge Rate: The current rate of battery charge or discharge. For most batteries this value will be in mWh.
App + Keygen
کد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
جواب بصورت نقل قول
