▓ Microsoft Word سوالات، مشكلات و مباحث در اینجا ▓

[wordist]

با سلام خدمت دوستان گرامی
میخواست بدونم چجوری میشه که من یک تصویر یا عکس و یا لوگوی شرکتی رو توی وورد پشت تمام نوشته ها به صورت صفحه به صفحه ( یعنی یک آرم بزرگ شرکت پشت تمام برگه هایی که ایجاد میشه ) بیفته ؟ آفیس 2003 و 2007

سلام دوست عزيز

به منوي Format برو و از زيرمنوي Background گزينه Printed watermark رو انتخاب كن و سپس select picture و .....

موفق باشي

[Aloneboy]

موقعی که ورد 2007 رو اجرا می کنم این ارور رو میده البته قبلا من این مشکل رو نداشتم تازه اینجوری شده:

برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید

و داخل متن این کادر این کلمه ها نوشته:
This error usually occurs because of macro security settings. If you know that the macro comes from a source that you trust, you can change your macro security settings to allow you to enable the macro. The way that you change your macro security settings depends on the Microsoft Office System program that you are using.
Microsoft Office Access, Microsoft Office Excel, Microsoft Office PowerPoint, or Microsoft Office Word --

To check your macro security settings, click the Microsoft Office Button, click <program name> Options, click Trust Center, and then click Trust Center Settings.
If macro security is set to Disable all macros without notification, all macros are automatically disabled. Use the following procedure to enable the macro.
In the Trust Center dialog box, click Macro Settings, and then click Disable all macros with notification.
Click OK in the Trust Center dialog box to apply the new setting. Click OK to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
When you have enabled the macro, it is recommended that you return the macro security setting to Disable all macros without notification.
If macro security is set to Disable all macros with notification, but you selected Disable when prompted by the macro warning dialog when you opened the file, use the following procedure to enable the macro.
In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
If macro security is set to Disable all macros except digitally signed macros, the macro may not have been digitally signed. Verify that you can trust the macro before using the following procedure to allow it to run.
In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.

Microsoft Office Outlook, Microsoft Office Visio, or Microsoft Office Publisher --

To check your macro security settings, on the Tools menu, click Trust Center, and then click Macro Security.
If macro security is set to No warnings and disable all macros, all macros are automatically disabled. Use the following procedure to enable the macro.
In the Trust Center dialog box, click Warnings for signed macros; all unsigned macros are disabled, and then click OK.
Close the file and the Microsoft Office program that you are using.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are using Visio, the Enable Content button appears as part of a Security Alert in the Document Information Bar. If you are not prompted to enable the macro, or if you receive this error again, the macro may not be digitally signed. Verify that you can trust the macro. If you are certain that you can trust the macro, use the next procedure below to enable the macro.
When you have enabled the macro, it is recommended that you return the macro security setting to No warnings and disable all macros.
If macro security is set to Warnings for signed macros; all unsigned macros are disabled, the macro may not be digitally signed. If you are certain that you can trust the macro, use the following procedure to enable the macro.
In the Trust Center dialog box, click Warnings for all macros, and then click OK.
Close the file and the Microsoft Office program that you are using.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are using Visio, the Enable Content button appears as part of a Security Alert in the Document Information Bar.
When you have enabled the macro, it is recommended that you return the macro security setting to Warnings for signed macros; all unsigned macros are disabled.

Microsoft Office Project --

To check your macro security settings, on the Tools menu, click Macro, and then click Security.
If macro security is set to Very High, use the following procedure to enable the macro.
In the Security dialog box, click High, and then click OK.
Close the file and Microsoft Office Project.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are not prompted to enable the macro, or if you receive this error message again, the macro may not be digitally signed. Verify that you can trust the macro. If you are certain that you can trust the macro, use the next procedure below to enable the macro.
When you have enabled the macro, it is recommended that you return the macro security setting to Very High.
If the macro security setting is set to High, the macro may not be digitally signed. If you are certain that you can trust the macro, use the following procedure to enable the macro.
In the Security dialog box, click Medium, and then click OK.
Close the file and Microsoft Office Project.
Open the file again. When prompted, click Enable Content to allow the macro to run.
When you have enabled the macro, it is recommended that you return the macro security setting to High.

This error may also occur for the following reasons:
The certificate of trust that is attached to the macro is invalid. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
The certificate is no longer trusted, was revoked by the issuing authority, or is damaged. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
Visual Basic for Applications (VBA) is not installed on your computer. In this case, no VBA macro can be run, regardless of whether the macro has a valid certificate of trust. You or your administrator may have chosen not to install VBA, or the version of Microsoft Office that you are using may not install VBA by default. If your version of Microsoft Office does not provide VBA as an installable feature, you can upgrade to a version that provides VBA support.
If you are unable to change the security settings, it is possible that another program has locked the security settings. Close all Microsoft Office System programs, then restart your program and change the security settings.
More information about this error message online.

[mohsen.rajabi]

سلام دوست عزيز

دورش چه نوع طرحي مي‌خواي بذاري

مثلا اگه بخواي مي توني توي textbox بذاريش يا .... منظورت رو از طرح مشخص كن

نگاه کتابها رو دیدید بعضی هاش شماره صفحه کنار صفحه است و یه طرح اسلیمی مانند دورشه از اینجور طرح ها

[wordist]

موقعی که ورد 2007 رو اجرا می کنم این ارور رو میده البته قبلا من این مشکل رو نداشتم تازه اینجوری شده:

برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید

و داخل متن این کادر این کلمه ها نوشته:
This error usually occurs because of macro security settings. If you know that the macro comes from a source that you trust, you can change your macro security settings to allow you to enable the macro. The way that you change your macro security settings depends on the Microsoft Office System program that you are using.
Microsoft Office Access, Microsoft Office Excel, Microsoft Office PowerPoint, or Microsoft Office Word --

To check your macro security settings, click the Microsoft Office Button, click <program name> Options, click Trust Center, and then click Trust Center Settings.
If macro security is set to Disable all macros without notification, all macros are automatically disabled. Use the following procedure to enable the macro.
In the Trust Center dialog box, click Macro Settings, and then click Disable all macros with notification.
Click OK in the Trust Center dialog box to apply the new setting. Click OK to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
When you have enabled the macro, it is recommended that you return the macro security setting to Disable all macros without notification.
If macro security is set to Disable all macros with notification, but you selected Disable when prompted by the macro warning dialog when you opened the file, use the following procedure to enable the macro.
In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
If macro security is set to Disable all macros except digitally signed macros, the macro may not have been digitally signed. Verify that you can trust the macro before using the following procedure to allow it to run.
In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.

Microsoft Office Outlook, Microsoft Office Visio, or Microsoft Office Publisher --

To check your macro security settings, on the Tools menu, click Trust Center, and then click Macro Security.
If macro security is set to No warnings and disable all macros, all macros are automatically disabled. Use the following procedure to enable the macro.
In the Trust Center dialog box, click Warnings for signed macros; all unsigned macros are disabled, and then click OK.
Close the file and the Microsoft Office program that you are using.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are using Visio, the Enable Content button appears as part of a Security Alert in the Document Information Bar. If you are not prompted to enable the macro, or if you receive this error again, the macro may not be digitally signed. Verify that you can trust the macro. If you are certain that you can trust the macro, use the next procedure below to enable the macro.
When you have enabled the macro, it is recommended that you return the macro security setting to No warnings and disable all macros.
If macro security is set to Warnings for signed macros; all unsigned macros are disabled, the macro may not be digitally signed. If you are certain that you can trust the macro, use the following procedure to enable the macro.
In the Trust Center dialog box, click Warnings for all macros, and then click OK.
Close the file and the Microsoft Office program that you are using.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are using Visio, the Enable Content button appears as part of a Security Alert in the Document Information Bar.
When you have enabled the macro, it is recommended that you return the macro security setting to Warnings for signed macros; all unsigned macros are disabled.

Microsoft Office Project --

To check your macro security settings, on the Tools menu, click Macro, and then click Security.
If macro security is set to Very High, use the following procedure to enable the macro.
In the Security dialog box, click High, and then click OK.
Close the file and Microsoft Office Project.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are not prompted to enable the macro, or if you receive this error message again, the macro may not be digitally signed. Verify that you can trust the macro. If you are certain that you can trust the macro, use the next procedure below to enable the macro.
When you have enabled the macro, it is recommended that you return the macro security setting to Very High.
If the macro security setting is set to High, the macro may not be digitally signed. If you are certain that you can trust the macro, use the following procedure to enable the macro.
In the Security dialog box, click Medium, and then click OK.
Close the file and Microsoft Office Project.
Open the file again. When prompted, click Enable Content to allow the macro to run.
When you have enabled the macro, it is recommended that you return the macro security setting to High.

This error may also occur for the following reasons:
The certificate of trust that is attached to the macro is invalid. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
The certificate is no longer trusted, was revoked by the issuing authority, or is damaged. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
Visual Basic for Applications (VBA) is not installed on your computer. In this case, no VBA macro can be run, regardless of whether the macro has a valid certificate of trust. You or your administrator may have chosen not to install VBA, or the version of Microsoft Office that you are using may not install VBA by default. If your version of Microsoft Office does not provide VBA as an installable feature, you can upgrade to a version that provides VBA support.
If you are unable to change the security settings, it is possible that another program has locked the security settings. Close all Microsoft Office System programs, then restart your program and change the security settings.
More information about this error message online.

سلام دوست عزيز

فايل ورد شما داراي يك ماكرو مي‌باشد كه امنيت محتوايي آن براي ورد 2007 قابل شناسايي نيست ،‌و چون ويروسها يا تروجانها و ... مي‌توانند در قالب كدهاي VBA كه در ماكروها مي‌باشند به سيستمهاي كامپيوتري حمله كنند اين پيغام و هشدار براي شما در هنگام باز كردن اين فايل نمايش داده مي‌شود.

حال با Ok كردن پيغام ، زير ريبون نوارابزارها همان پيغام (محدودتر) به همراه دكمه Option نمايش داده ميشود كه با زدن آن دكمه و انتخاب گزينه Enable ...... فايل شما باز مي‌شود.

اگر نشد عكس صفحه بعد از OK كردن كادر را بگذاريد تا روش ديگري را توضيح دهم.

موفق باشي

[wordist]

نگاه کتابها رو دیدید بعضی هاش شماره صفحه کنار صفحه است و یه طرح اسلیمی مانند دورشه از اینجور طرح ها

سلام دوست عزيز

خوب دقت كن نسبت به جزئيات نوشته شده در متن ساده زير

اين كار رو بوسيله گذاشتن يك word Art حاوي كاراكتر اسليمي موردنظر كه در آن از حالت Behind Text (زير متن) استفاده شده است ، در Header and footer انجام مي‌شود.

سعي كن موفق بشي انجامش بدي اگه نه بگو تا بگم

[mohsen.rajabi]

سلام دوست عزيز

خوب دقت كن نسبت به جزئيات نوشته شده در متن ساده زير

اين كار رو بوسيله گذاشتن يك word Art حاوي كاراكتر اسليمي موردنظر كه در آن از حالت Behind Text (زير متن) استفاده شده است ، در Header and footer انجام مي‌شود.

سعي كن موفق بشي انجامش بدي اگه نه بگو تا بگم

ممنون از راهنماییت سعی می کنم اگه نتونستم بهت pm می دم

[Aloneboy]

سلام دوست عزيز

فايل ورد شما داراي يك ماكرو مي‌باشد كه امنيت محتوايي آن براي ورد 2007 قابل شناسايي نيست ،‌و چون ويروسها يا تروجانها و ... مي‌توانند در قالب كدهاي VBA كه در ماكروها مي‌باشند به سيستمهاي كامپيوتري حمله كنند اين پيغام و هشدار براي شما در هنگام باز كردن اين فايل نمايش داده مي‌شود.

حال با Ok كردن پيغام ، زير ريبون نوارابزارها همان پيغام (محدودتر) به همراه دكمه Option نمايش داده ميشود كه با زدن آن دكمه و انتخاب گزينه Enable ...... فايل شما باز مي‌شود.

اگر نشد عكس صفحه بعد از OK كردن كادر را بگذاريد تا روش ديگري را توضيح دهم.

موفق باشي

اصلا فایل وردی در کار نیست من برنامه ورد رو که باز می کنم این پیغام رو میده که باید چندین بار دکمه ok رو بزنم تا این پیغام بره و بتوانم شروع به کار کنم و اون قسمت که گفتید (زير ريبون نوارابزارها همان پيغام (محدودتر) به همراه دكمه Option نمايش داده ميشود كه با زدن آن دكمه و انتخاب گزينه Enable ...... فايل شما باز مي‌شود.) وجود ندارد

[wordist]

اصلا فایل وردی در کار نیست من برنامه ورد رو که باز می کنم این پیغام رو میده که باید چندین بار دکمه ok رو بزنم تا این پیغام بره و بتوانم شروع به کار کنم و اون قسمت که گفتید (زير ريبون نوارابزارها همان پيغام (محدودتر) به همراه دكمه Option نمايش داده ميشود كه با زدن آن دكمه و انتخاب گزينه Enable ...... فايل شما باز مي‌شود.) وجود ندارد

سلام دوست عزيز

چند احتمال وجود داره

1- اينكه آفيس در ابتدا كامل نصب نشده و قسمت مربوط به ساپورت ماكروها و كنترلها نصب نگرديده است كه در اين صورت بايد آفيس را كامل نصب كنيد.

ج: نصب كامل آفيس

2- در قسمت تنظيمات زبان (language settings) در خود ورد نه ويندوز ، زبان فارسي انتخاب و اضافه نشده است

ج: start --> All program --> Microsoft office --> Microsoft office tools --> Microsoft office 2007 language setting و انتخاب زبان فارسي

3- ورد براي ماكروها بصورت پيش‌فرض حالت غيرفعال به خود مي گيرد تا مبادا انها ويروسي نباشند كه مي توان ان را از اين حالت خارج كرد.

ج: زدن دكمه آفيس (office button) در ورد (دكمه بالا و سمت چپ) و زدن word option و قسمت trust center و قسمت macro settings و گزينه هاي مربوطه جهت فعال سازي يا غيرفعال سازي ماكروها. به نظر من گزينه اول رو بزن و اگه دوباره پيغام داد اون موقع گزينه چهارم رو بزن و داخل ورد شو.

حتما اگه درست شد از هر راهي يا درست نشد روي مسنجر خبرم كن تا بگم بري ببيني ياي ماكرويي فعال هست و وجود داره يا نه

موفق باشي

[mahn90]

Sلام دوستان من میخوام بدونم چطوری میتونم ت. ورد 2007 کادر بزارم با شماره صفحه؟
در ضمن پطوری میشه وقتی عدد 7 رو میرنم 7 فارسی بنویسع نه انگلیسی؟؟؟؟؟؟؟؟؟؟

[wordist]

Sلام دوستان من میخوام بدونم چطوری میتونم ت. ورد 2007 کادر بزارم با شماره صفحه؟
در ضمن پطوری میشه وقتی عدد 7 رو میرنم 7 فارسی بنویسع نه انگلیسی؟؟؟؟؟؟؟؟؟؟

سلام دوست عزيز

براي ايجاد كادر دور صفحه از زبانه Page Layout و دكمه Page border استفاده كن

براي ايجاد شماره صفحه از ريبون insert و دكمه Page number استفاده كن

براي نوشتن فارسي اعداد هرچند تا حالا خيلي توضيح داده شده ولي بازم ميگم

شما از word option و قسمت advance بايد دنبال باكس Numeral باشي و از داخلش گزينه context رو انتخاب كني

موفق باشي عزيز