سلام
کمک کمک
من ubuntu 7.10 دارم و kernle 2.6.22.14-generic مودمم creative modem blaster di 5663 و از نوع hsf اين درايورو hsfmodem_7.68.00.04full_k2.6.22_14_generic_ubuntu_ i386.deb.zip
از اين سايتگرفتم نصبشم کردم ولي وقتي با pppconfig_2.3.15.etch1_all.deb کانکت ميشم 5 ثانيه بعد خود به خود disconnect ميشه. دستور sudo wvdialconf /etc/wvdial.confکد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
اجرا کردم مطالب پايينو نوشت و بعد pppconfig با اطلاعات زير تنظيم کردم ولي مودم حدود 5 ثانيه بعد از وصل شدن قطع ميشه
fragari@fragari-desktop:~$ sudo wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
ttySHSF0<*1>: ATQ0 V1 E1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHSF0<*1>: Modem Identifier: ATI -- 56000
ttySHSF0<*1>: Speed 4800: AT -- OK
ttySHSF0<*1>: Speed 9600: AT -- OK
ttySHSF0<*1>: Speed 19200: AT -- OK
ttySHSF0<*1>: Speed 38400: AT -- OK
ttySHSF0<*1>: Speed 57600: AT -- OK
ttySHSF0<*1>: Speed 115200: AT -- OK
ttySHSF0<*1>: Speed 230400: AT -- OK
ttySHSF0<*1>: Speed 460800: AT -- OK
ttySHSF0<*1>: Max speed is 460800; that should be safe.
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3 SHSF1 SHSF2 SHSF3 SHSF4 SHSF5 SHSF6
Modem Port Scan<*1>: SHSF7
Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
اینا اطلاعات ModemData پایین گذاشتم
Only plain text email is forwarded by the [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ] List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through:Responses from [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ] are sometimes blocked by an Internet Provider mail filters.کد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
So in a day, also check the Archived responses at-------------------------- System information ----------------------------کد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
scanModem update of: 2007-20-07
modem
intel8x0m
hsf
hcf
slamr
ungrab-winmodem
snd-hda-intel
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
hsfusbcd2
hsfmc97sis
hsfmc97ati
hsfmc97ali
hsfmc97via
hsfmc97ich
hsfpcibasic3
hsfpcibasic2
hsfserial
hsfengine
hsfosspec
hsfsoar
---ALSA bootup diagnostics ---
The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,
also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.
Modem not detected though HDA card diagnostics, though not excluding
a possible Conexant modem chip impervious to ALSA diagnostics.
Proceeding through alternative possibilties.
Summary card and chipset information is in:
/proc/asound/cards:
0 [V8235 ]: VIA8233 - VIA 8235
VIA 8235 with ALC650E at 0xe400, irq 10
1 [UART ]: MPU-401 UART - MPU-401 UART
MPU-401 UART at 0x330, irq 5
2 [SAA7134 ]: SAA7134 - SAA7134
saa7133[0] at 0xea010000 irq 11
/proc/asound/pcm:
02-00: SAA7134 PCM : SAA7134 PCM : capture 1
00-01: VIA 8235 : VIA 8235 : playback 1 : capture 1
00-00: VIA 8235 : VIA 8235 : playback 4 : capture 1
A copy of /proc/asound had been copied to Modem/ALSAfragari.tgz
USB modem not detected by lsusb
For candidate card, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:0d.0 14f1:2f00 148d:1663 Communication controller: Conexant HSF 56k HSFi Modem
Modem interrupt assignment and sharing:
11: 40172 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, saa7133[0], saa7133[0], hsfpcibasic2
--- Bootup diagnostics for card in PCI slot 00:0d.0 ----
[ 1392.358272] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1393.256856] ACPI: PCI interrupt for device 0000:00:0d.0 disabled
[ 1394.668716] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1396.357303] ACPI: PCI interrupt for device 0000:00:0d.0 disabled
[ 1397.749596] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
The PCI slot 00:0d.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
There is candidate modem software.
For candidate modem in PCI bus: 00:0d.0
Class 0780: 14f1:2f00 Communication controller: Conexant HSF 56k HSFi Modem
Primary PCI_id 14f1:2f00
Support type needed or chipset: slamr
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
Read Conexant.txt
Writing Conexant.txt
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
For 2.6.22-14-generic compiling drivers is necessary. As of October 2007 the current packages at
are theکد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20070813.tar.gz
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found throughOnce downloaded and transferred into a Linux partition,کد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
To enable dialout without Root permission do:کد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
seeکد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
================================================== ========
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 8 2007-11-30 07:15 /dev/modem -> ttySHSF0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/hsf:alias /dev/modem /dev/ttySHSF
/etc/modprobe.d/hsf.conflicts:install snd-via82xx-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97via
/etc/modprobe.d/hsf.conflicts:install snd-atiixp-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97ati
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
/etc/devfs/conf.d/hsf.conf:LOOKUP ^(ttySHSF[0-9]|modem$) EXECUTE nice /sbin/modprobe /dev/ttySHSF
/etc/devfs/conf.d/hsf.conf:REGISTER ^ttySHSF0$ CFUNCTION GLOBAL symlink $devname modem
/etc/devfs/conf.d/hsf.conf:UNREGISTER ^ttySHSF0$ CFUNCTION GLOBAL unlink modem
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
اینا هم اطلاعات 1stRead پایین
The files in this Modem/ folder have the following roles:
ModemData.txt - Diagnostics and accumulated information cogent to your modem and host system.
This is the ONLY file which should be sent to the List [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ] ,
if further help is needed. Send your email and attachments as plain text as
other formats are rejected by the List Server, to avoid virus transmission.
Always send the ENTIRE ModemData.txt, as It includes subtle diagnostic ouputs needed
to best guide you. Please in the covering email mention your Country, to enable Country
specific advice.
Always use the most recent update of scanModem accessed ONLY at
to produce ModemData.txtکد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
URLs to cogent advice are regularly updated, so your problem may be solved therein.
Please Do NOT send Do NOT send other files in this folder Modem/
A file(s) specific to your modem chipset will be written, such as:
Smartlink.txt, Conexant.txt, Intel.txt , etc
YourModem.txt - Guidance about operating your particular System, for your benefit
It should NOT be sent to [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
Rational.txt - Motivations of this scanModem package.
DriverCompiling.txt - Explains the roles of additional files which may have to be installed
to support compiling of modem drivers, and the steps to take.
SoftModem.txt - Information and instructions about "soft modems".
For these modems, additional steps may be necessary for choice of supporting software.
The primary PCI ID is that of the host audio or modem controller, which can support diverse Subsystems. It is the chipset of the Subsystem which determines the software needed.
ModemTesting.txt SHOULD be read, but after drivers have been installed.
InfoGeneral.txt has general information about the status of winmodem support under Linux,
Do read it if ModemData.txt reports that your current modem is not supported under Linux.
Unsubscribe.txt - Howto terminate email tranmissions from the List.
If you are Linux newcomer, please do locate your local Linux group through:
. If you are not comfortable with English,کد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
a local Linux user can often be of substantial assistance in getting you on to the Internet.
ببخشید اگه خیلی زیاد شد.gif "N Aggressive (29)")
.gif "N Aggressive (26)")
.gif "N Aggressive (40)")
جواب بصورت نقل قول
نوشته شده توسط ddavod
.gif "N Aggressive (2)")
.gif "N Aggressive (19)")
.gif "N Aggressive (25)")
د.!!! الان ویندوز و اوبونتو بالا می آیند ولی خبری از فدورا نیست..gif "N Aggressive (24)")
