▓ Microsoft Word سوالات، مشكلات و مباحث در اینجا ▓

[mm45]

سلام دوستان

یه کتاب به صورت فایل با پسوند .doc دارم که با ورد باز میشه و میتونم مطالعه اش کنم اما نیاز دارم بخشی از کتاب را کپی کنم که این فایل این اجازه را بهم نمیده و فایل مانند عکس نشون میده . هر چند عکس هم نیست !

نمونه ای از این فایل را در لینک زیر قرار میدم .
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

پسورد فایل هم هست : [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]



ممنون

[surena_iran2564]

سلام
من با استفاده از قسمت insert index موجود در refrences فهرست ایجاد کردم. اما این فهرست بر اساس حروف الفباست. چطور میتونم این فهرست رو بر حسب صفحه مرتب کنم؟
با تشکر

[H.Mahmoudi]

با سلام خدمت شما دوستان گرامی
من نیاز به فونت‌های فارسی دارم که صفر توخالی می‌زنند. اگر امکان دارد راهنمایی بفرمایید. مخصوصاً B Traffic و B koodak . با تشکر فراوان.

[skyzare]

با سلام خدمت شما دوستان گرامی
من نیاز به فونت‌های فارسی دارم که صفر توخالی می‌زنند. اگر امکان دارد راهنمایی بفرمایید. مخصوصاً B Traffic و B koodak . با تشکر فراوان.

با سلام .

من الان امتحان کردم این دو تا فونت هر دو تاش صفر رو تو پر میزنند . حالا اگه میخواید تا براتون بذارمشون .

[The Auditor]

b tabassom صفرش بازه

[SHAHAB-P30]

سلام دوستان جریان این ارور چیه وقتی Word رو الجرا میکنم؟

  محتوای مخفی: متن کامل error 

This error usually occurs because of macro security settings. If you know that the macro comes from a source that you trust, you can change your macro security settings to allow you to enable the macro.
If the file opens in Protected View, click Enable Editing, and then click Enable Content. Editing functions are restored and the active content, including macros, will run. This file is now trusted; security prompts will no longer appear unless the file is opened on another computer.
Change macro settings
You can change macro security settings in the Trust Center. However, if you work in an organization, your system administrator might have changed the default settings to prevent anyone from changing any settings. Use the following instructions to change macro settings for your Office programs.

1. Click the File tab. The Backstage view appears.
2. Under Help, click Options. The Options dialog appears.
3. Click Trust Center, then click Trust Center Settings.
4. In the Trust Center click Macro Settings.

Macro settings explained:

• Disable all macros without notification - Macros and security alerts about macros are disabled. If there are files with unsigned macros that you do trust, you can put those files into a trusted location. Files in trusted locations run without being checked by the File Validation process.
• Disable all macros with notification - Macros are disabled, but security alerts appear if there are macros present. Enable macros on a case-by-case basis.
• Disable all macros except digitally signed macros - Macros are disabled, but security alerts appear if there are macros present. However, if the macro is digitally signed by a trusted publisher, the macro runs if you have trusted the publisher. If you have not trusted the publisher, you are notified to enable the signed macro and trust the publisher.
• Enable all macros (not recommended, potentially dangerous code can run) - All macros run. This setting makes your computer vulnerable to potentially malicious code.
• Trust access to the VBA project object model - Disallow or allow programmatic access to the Microsoft Visual Basic for Applications (VBA) object model from an automation client. This security option is for code written to automate an Office program and manipulate the VBA environment and object model. It is a per-user and per-application setting, and denies access by default, hindering unauthorized programs from building harmful self-replicating code. For automation clients to access the VBA object model, the user running the code must grant access. To turn on access, select the check box.

Note Microsoft Publisher and Access have no Trust access to the VBA project object model option.
This error might also occur for the following reasons:

• The certificate of trust that is attached to the macro is invalid. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro. Use the following instructions to view valid or invalid digital signatures.
  
  1. Click the File tab. The Backstage view opens.
  2. Click the Info tab.
  3. Under Signed Document, click View Signatures.
  4. The Signatures pane appears with a list of valid signatures.
  5. For more information, in the Signatures pane, click the down-arrow next to each signature.
  
  
• The certificate is no longer trusted, was revoked by the issuing authority, or is damaged. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
• Visual Basic for Applications (VBA) is not installed on your computer. In this case, no VBA macro can be run, regardless of whether the macro has a valid certificate of trust. You or your administrator may have chosen not to install VBA, or the version of Microsoft Office that you are using may not install VBA by default. If your version of Microsoft Office does not provide VBA as an installable feature, you can upgrade to a version that provides VBA support.
• If you are unable to change the security settings, it is possible that another program has locked the security settings. Close all Microsoft Office programs, then restart your program and change the security settings.

[Dew Drop]

سلام دوستان جریان این ارور چیه وقتی Word رو الجرا میکنم؟

  محتوای مخفی: متن کامل error 

This error usually occurs because of macro security settings. If you know that the macro comes from a source that you trust, you can change your macro security settings to allow you to enable the macro.
If the file opens in Protected View, click Enable Editing, and then click Enable Content. Editing functions are restored and the active content, including macros, will run. This file is now trusted; security prompts will no longer appear unless the file is opened on another computer.
Change macro settings
You can change macro security settings in the Trust Center. However, if you work in an organization, your system administrator might have changed the default settings to prevent anyone from changing any settings. Use the following instructions to change macro settings for your Office programs.

1. Click the File tab. The Backstage view appears.
2. Under Help, click Options. The Options dialog appears.
3. Click Trust Center, then click Trust Center Settings.
4. In the Trust Center click Macro Settings.

Macro settings explained:

• Disable all macros without notification - Macros and security alerts about macros are disabled. If there are files with unsigned macros that you do trust, you can put those files into a trusted location. Files in trusted locations run without being checked by the File Validation process.
• Disable all macros with notification - Macros are disabled, but security alerts appear if there are macros present. Enable macros on a case-by-case basis.
• Disable all macros except digitally signed macros - Macros are disabled, but security alerts appear if there are macros present. However, if the macro is digitally signed by a trusted publisher, the macro runs if you have trusted the publisher. If you have not trusted the publisher, you are notified to enable the signed macro and trust the publisher.
• Enable all macros (not recommended, potentially dangerous code can run) - All macros run. This setting makes your computer vulnerable to potentially malicious code.
• Trust access to the VBA project object model - Disallow or allow programmatic access to the Microsoft Visual Basic for Applications (VBA) object model from an automation client. This security option is for code written to automate an Office program and manipulate the VBA environment and object model. It is a per-user and per-application setting, and denies access by default, hindering unauthorized programs from building harmful self-replicating code. For automation clients to access the VBA object model, the user running the code must grant access. To turn on access, select the check box.

Note Microsoft Publisher and Access have no Trust access to the VBA project object model option.
This error might also occur for the following reasons:

• The certificate of trust that is attached to the macro is invalid. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro. Use the following instructions to view valid or invalid digital signatures.
  
  1. Click the File tab. The Backstage view opens.
  2. Click the Info tab.
  3. Under Signed Document, click View Signatures.
  4. The Signatures pane appears with a list of valid signatures.
  5. For more information, in the Signatures pane, click the down-arrow next to each signature.
  
  
• The certificate is no longer trusted, was revoked by the issuing authority, or is damaged. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
• Visual Basic for Applications (VBA) is not installed on your computer. In this case, no VBA macro can be run, regardless of whether the macro has a valid certificate of trust. You or your administrator may have chosen not to install VBA, or the version of Microsoft Office that you are using may not install VBA by default. If your version of Microsoft Office does not provide VBA as an installable feature, you can upgrade to a version that provides VBA support.
• If you are unable to change the security settings, it is possible that another program has locked the security settings. Close all Microsoft Office programs, then restart your program and change the security settings.

[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

[artist5]

سلام.خدمت دوستان عزیز.من 2 تا مشکل دارم:
1)من توی قسمت (orientation>>>land scape<<<columns <<<three)) را انتخاب کردم که بشود بروشور...حالا چطوری میتونم برای هر ستون یک page border تعریف کنم که هر ستون یک page border داشته باشه.

2)وقتی که یک عکس را میخوام به عنوان background استفاده کنم اون عکس توی background چند تا نمایش میده.منظورم این است که
اون عکس فکر کنم چون کوچک است توی background ه صورت چند تایی در کنا هم قرار میگیره .چکار کنم که بتونم فقط یک عکس به صورت تمام background داشته باشم
ممنون میشم اگر کمکم کنید.

[sohrab doaby]

سلام
من میخوام در WOrd 2003 بصورت چندستونی بنویسم بعد وقتی از منوی Format Column رو میزنم دو ستون میخوام انگلیسی بنویسم میزارم رو Right-to-left ولی متاسفانه درست نمیشه تصویر زیر رو ببینید

برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید

درست نمیشه یعنی میخوام از ستون اول بنویسم ولی میره رو ستون دوم

با درود به شما دوست عزیز

برای جابجایی از یه ستون به ستون دیگه باید کلیدهای ctrl + shift رو بگیری و همزمان کلید Enter رو بزنی .

امیدوارم موفق بشی

[sohrab doaby]

سلام.خدمت دوستان عزیز.من 2 تا مشکل دارم:
1)من توی قسمت (orientation>>>land scape<<<columns <<<three)) را انتخاب کردم که بشود بروشور...حالا چطوری میتونم برای هر ستون یک page border تعریف کنم که هر ستون یک page border داشته باشه.

2)وقتی که یک عکس را میخوام به عنوان background استفاده کنم اون عکس توی background چند تا نمایش میده.منظورم این است که
اون عکس فکر کنم چون کوچک است توی background ه صورت چند تایی در کنا هم قرار میگیره .چکار کنم که بتونم فقط یک عکس به صورت تمام background داشته باشم
ممنون میشم اگر کمکم کنید.

درود بر تو دوست خوب

در پاسخ به پرسش اول تون به باور من نميشه از page border های قسمت Art استفاده کرد برای این کار بهتره ازshapes یا Textbox استفاده کني و در هرستون یکی از اونا رو بزاری .


در مورد پرسش دومتون من دقیقا متوجه نشدم یعنی به صورت titl در میاد ؟
اما برای تغییر اندازه تصویر در background میتونی از مسیر Page Layout > watermark > custom watermark رفته پس از انتخاب picture watermark از کادر روبروی scale اندازه عکس رو در background به اندازه دلخواه برسونی.