. change your hdd configuration to ACHI mode so it will force it to use DMA mode for data transfer
2. increase your temperature of your hdd to optimum temp of around 30-40+(seems like the temp cannot be too low or it will drop to PIO mode)
3. change registry to force back to DMA mode
below is the tutorial for forced DMA i copied from one website()کد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
1. Open RegEdit
2. Find the following KEY: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\ Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\000x
3. The last four digits will be 0000, 0001, 0002, 0003, and so on.
4. Under each key, delete all occurences of the following values: MasterIdDataChecksum SlaveIdDataChecksum
5. Reboot the computer. Windows will now redetect DMA settings.
do check this article for more info about the issue IDE ATA and ATAPI Disks Use PIO Mode After Multiple Time-Out or CRC Errors Occurکد:برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
---------- Post added at 11:35 AM ---------- Previous post was at 11:34 AM ----------
مسئله ديگه حتما اين هاردها رو با خود برنامه وسترن پارتشين بندي و فرمت كنيد