سلام
این هم خروجی اون فایل pci32 که اجرا کردم . حالا چیکار کنم؟
NT: Open SCM : Operation was successful
NT: Install driver : Service already exists
NT: Start driver : Operation was successful
NT: Close SCM : Operation was successful
NT: Open Driver : Operation was successful
Craig Hart's PCI+AGP bus sniffer, Version 1.1, freeware made in 1996-2005.
Searching for PCI Devices using Configuration Mechanism 1 [NT/2K/XP/etc Method]
Vendor 8086h Intel Corporation
Device 2770h Unknown
Command 0006h (Memory Access, BusMaster)
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., Received Master Abort, Fast Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Subsystem ID 50001458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
New Capabilities List Present:
Vendor-Dependant Capability
Vendor 8086h Intel Corporation
Device 2771h Unknown
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to PCI
System IRQ 16, INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus Number 1
Secondary Bus Command 0018h (VGA mapping)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : E0000000h to E2FFFFFFh
Prefectchable Memory Range Passed to Secondary Bus : 00000000D0000000h to 00000000DFFFFFFFh
New Capabilities List Present:
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1458h
SSID : 5000h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
3.3v AUX Current required : 0mA (Self powered)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
PCI Express Capability, Version 1
Device/Port Type : Root port of PCI Express Root Complex
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x16
Link Port Number : 2
Common Clock Configuration In Use
Current Link speed : 2.5Gb/s
Current Link Width : x16
Physical slot Number 4
Vendor 8086h Intel Corporation
Device 27D8h Unknown
Command 0006h (Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Multimedia, type Unknown! (Subclass 03h, ProgIF 00h)
Subsystem ID A1021458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is a Memory Address (anywhere in 64-bit space) : E3200000h
System IRQ 16, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
3.3v AUX Current required : 55mA
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type : Root Complex Integrated Endpoint Device
Unsupported Request Severity is Non-Fatal
AUX Power Detected
Maximum Link speed : Unknown (00h)!!
Maximum Link Width : xReserved
Link Port Number : 0
Asynchronous Clocking in Use
Current Link speed : Unknown (00)!!
Current Link Width : x0
Physical slot Number 0
Vendor 8086h Intel Corporation
Device 27D0h Unknown
Command 0105h (I/O Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 01h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to PCI
System IRQ 16, INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus Number 2
Secondary Bus Command 0006h (ISA mapping)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : 9000h to 9FFFh (16-bit)
Memory Range Passed to Secondary Bus : None
Prefectchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type : Root port of PCI Express Root Complex
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
AUX Power Detected
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 1
Asynchronous Clocking in Use
Current Link speed : 2.5Gb/s
Current Link Width : x0
Hot Plug Surprise is Possible
Hot Plug Capable
Physical slot Number 2
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 0000h
SSID : 0000h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
3.3v AUX Current required : 0mA (Self powered)
Vendor 8086h Intel Corporation
Device 27D4h Unknown
Command 0106h (Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 01h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to PCI
System IRQ 18, INT# C
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus Number 3
Secondary Bus Command 0006h (ISA mapping)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : E3000000h to E30FFFFFh
Prefectchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type : Root port of PCI Express Root Complex
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
AUX Power Detected
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 3
Common Clock Configuration In Use
Current Link speed : 2.5Gb/s
Current Link Width : x1
Hot Plug Surprise is Possible
Hot Plug Capable
Physical slot Number 2
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 0000h
SSID : 0000h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
3.3v AUX Current required : 0mA (Self powered)
Vendor 8086h Intel Corporation
Device 27C8h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 50041458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 0000BC00h
System IRQ 23, INT# A
Vendor 8086h Intel Corporation
Device 27C9h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 50041458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 0000B000h
System IRQ 19, INT# B
Vendor 8086h Intel Corporation
Device 27CAh Unknown
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 50041458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 0000B400h
System IRQ 18, INT# C
Vendor 8086h Intel Corporation
Device 27CBh Unknown
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 50041458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 0000B800h
System IRQ 16, INT# D
Vendor 8086h Intel Corporation
Device 27CCh Unknown
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 50061458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is a Memory Address (anywhere in 0-4Gb) : E3204000h
System IRQ 23, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Vendor 8086h Intel Corporation
Device 244Eh 82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision E1h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI (Subtractive Decode)
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus Number 4
Secondary Bus Command 0004h (ISA mapping)
Secondary Bus Status 2280h (Supports Back-To-Back Trans., Received Master Abort, Medium Timing)
Secondary Bus Latency 20h
I/O Port Range Passed to Secondary Bus : A000h to AFFFh (16-bit)
Memory Range Passed to Secondary Bus : E3100000h to E31FFFFFh
Prefectchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 0000h
SSID : 0000h
Vendor 8086h Intel Corporation
Device 27B8h Unknown
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 01h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Subsystem ID 50011458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
New Capabilities List Present:
Vendor-Dependant Capability
Vendor 8086h Intel Corporation
Device 27DFh Unknown
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is at I/O Port 01F0h and IRQ 14
Secondary Channel is at I/O Port 0170h and IRQ 15
Subsystem ID B0011458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is an I/O Port : 00000000h
Address 1 is an I/O Port : 00000000h
Address 2 is an I/O Port : 00000000h
Address 3 is an I/O Port : 00000000h
Address 4 is an I/O Port : 0000F000h
Vendor 8086h Intel Corporation
Device 27C0h Unknown
Command 0005h (I/O Access, BusMaster)
Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is in native mode at Addresses 0 & 1
Secondary Channel is in native mode at Addresses 2 & 3
Subsystem ID B0021458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is an I/O Port : 0000D000h
Address 1 is an I/O Port : 0000D400h
Address 2 is an I/O Port : 0000D800h
Address 3 is an I/O Port : 0000DC00h
Address 4 is an I/O Port : 0000E000h
System IRQ 19, INT# B
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
Vendor 8086h Intel Corporation
Device 27DAh Unknown
Command 0001h (I/O Access)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 50011458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 00000500h
System IRQ 11, INT# B
Vendor 10DEh Nvidia Corp
Device 0161h Unknown
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision A1h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Display, type VGA
Subsystem ID 21461682h Unknown
Subsystem Vendor 1682h Pine Technology Ltd
Address 0 is a Memory Address (anywhere in 0-4Gb) : E0000000h
Address 1 is a Memory Address (anywhere in 64-bit space, Prefetchable) : D0000000h
Address 3 is a Memory Address (anywhere in 64-bit space) : E1000000h
System IRQ 16, INT# A
Expansion ROM of 128Kb decoded by this card (Currently disabled)
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type : PCI Express Endpoint Device
Unsupported Request Severity is Fatal
Non-Fatal Error Detected
Unsupported Request Detected
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x16
Link Port Number : 0
Common Clock Configuration In Use
Current Link speed : 2.5Gb/s
Current Link Width : x16
Vendor 14E4h Broadcom Corp
Device 169Dh BCM5789 NetLink Gigabit Ethernet PCI Express
Command 0006h (Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 11h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Network, type Ethernet
Subsystem ID E0001458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is a Memory Address (anywhere in 64-bit space) : E3000000h
System IRQ 18, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
Power Data Registers Information:
D0 Power Consumed: 10000mW
D1 Power Consumed: 0mW
D2 Power Consumed: 0mW
D3 Power Consumed: 1000mW
D0 Power Dissipated: 10000mW
D1 Power Dissipated: 0mW
D2 Power Dissipated: 0mW
D3 Power Dissipated: 1000mW
Vital Product Data Capability
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type : PCI Express Endpoint Device
Unsupported Request Severity is Non-Fatal
Non-Fatal Error Detected
Unsupported Request Detected
AUX Power Detected
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Asynchronous Clocking in Use
Current Link speed : 2.5Gb/s
Current Link Width : x1
Vendor 1131h Philips Semiconductors
Device 7130h SAA7130HL Multimedia Capture Device
Command 0004h (Bus Access Disabled!!, BusMaster)
Status 8290h (Has Capabilities List, Supports Back-To-Back Trans., Detected Parity Error, Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 20h
Minimum Bus Grant 10h, Maximum Bus Latency 28h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Other
Subsystem ID 01385168h FlyTV Platinum30 Series (Guess Only!)
Subsystem Vendor 5168h Animation Technologies Inc
Address 0 is a Memory Address (anywhere in 0-4Gb) : E31FFC00h
System IRQ 20, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.0
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Power Data Registers Information:
D0 Power Consumed: 255mW
D1 Power Consumed: 255mW
D2 Power Consumed: 255mW
D3 Power Consumed: 255mW
D0 Power Dissipated: 255mW
D1 Power Dissipated: 255mW
D2 Power Dissipated: 255mW
D3 Power Dissipated: 255mW
Vendor 14F1h Conexant Systems
Device 2F30h Unknown
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 20h
Self test 00h (Self test not supported)
PCI Class Simple Communication, type Other
Subsystem ID 20D514F1h Unknown
Subsystem Vendor 14F1h Conexant Systems
Address 0 is a Memory Address (anywhere in 0-4Gb) : E3100000h
Address 1 is an I/O Port : 0000A000h
System IRQ 18, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
3.3v AUX Current required : 0mA (Self powered)
IRQ Summary: IRQs 11,14,15,16,18,19,20,23 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 5 PCI Devices
IRQ 18 is shared by 4 PCI Devices
IRQ 19 is shared by 2 PCI Devices
IRQ 23 is shared by 2 PCI Devices
IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...
NT: Close driver : Operation was successful
NT: Open SCM : Operation was successful
NT: Stop driver : Operation was successful
NT: Remove driver : Operation was successful
NT: Close SCM : Operation was successful
جواب بصورت نقل قول
نوشته شده توسط amin2000
.gif "N Aggressive (16)")
و سایر دوستان.gif "N Aggressive (39)")
.gif "N Aggressive (40)")
