کلوپ A1200

[mahmood_online2008]

J. HOW TO USE RADIOCOMM TO ENABLE EDGE
================================================== ===========================================
WARNING: REBOOT PROBLEM (added Aug 2007) There appears to be an issue with doing the following seem edit on the A1200 in that if you need to do a master clear or master reset after performing this seem edit, then your phone will continuously reboot. Here is what to do to fix this:
1. Turn phone off
2. Remove the SIM card.
3. Turn the phone on with no SIM and select 'no antenna' when prompted during bootup.
4. At this point, all your seem edits are gone (yuk).
5. Connect phone to computer and launch radiocomm
6. Perform the EDGE seem edit again with the SIM card out
7. Reboot phone
8. Turn off phone,
9. Reinstall the SIM card
10. Power it back up and problem should be fixed.

================================================== ===========================================

Thanks to a lot of detective work by Alpha43 and some other users on this forum it has recently been figured out how to turn on EDGE on the A1200 which permits much faster web browsing than the native GPRS. In order to turn on Edge you need to download the following two files
RadioComm - RadioComm is Motorola's own phone service software that its technicians use.
Edge.rar - script that you run via RadioComm that will automatically make the required changes
Then follow these instructions:

Part 1. Getting RadioComm to recognize your Motorola A1200:
Unrar "Edge.rar" and place file on desktop
Unzip RadioComm file and install it on your PC.
If you get the message that you have to install microsoft .net framework then cancel the install and go to

برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید

and download the .net work framwork and install it. Reboot PC and try to install RadioComm again.
Start RadioComm. It will display a settings window. Enter MA = GSM and Settings = M-Link USB driver
You should now see the main RadioComm panel. It should have a red "Radio Detection" button on the top right and you should see a Red square down in the taskbar icons area. When these turn green this indicates that the progam has detected the phone (radio) correctly.
Close RadioComm.
Turn on your phone go to Setup --> USB mode and select Modem.
Connect your phone to PC via USB cable and start Radiocomm,
Change the connection mode to USB if the software asks for it.
If your phone does not seem to be detected, go to Setup --> USB mode on the phone (while still plugged in) and select "USB Net". If still nothing, set back to "Modem".
When your phone is detected for the first time, a prompt may appear asking to install drivers. Select Yes and install the driver. This wil be repeated about 20 times so be patient!
You may have to reboot the system after all drivers are installed and restart RadioComm.
You will know when it has detected the phone correctly when the Radio Detection button on the right turns green.
*** If you have issues getting your phone to connect to Radiocomm (i.e you can not get detection button to turn green) then see section on using Hyper Terminal below ***

After you have got RadioComm working and detecting the phone, the rest is simple - all you have to do is run the script.

Part 2: Running the EDGE.tcs script
To the far right you will see several buttons; click the one labelled 'setup button'.
A window will pop-up, press the Browse button select the EDGE.tcs file you downloaded earlier
Lable the button 'Enable EDGE' (this is only for your reference) then click the button label 'SET'.
When done close that window, now you should have a new button labeled the way you named it in the previous step.
Click on the button to run the script. A series of log results should be displayed in the big white window. The last one should say 'Complete"
Exit RadioComm, unplug the phone and restart it.
If you have done it successfully you should see a "E" instead of a "G" in your Status Line. This of course assumes that Edge is available from your provider. If it is not you will still see the G.

If you have issues, then refer to this thread which has a good discussion on using RadioComm to perform Seed Edits.
For some screen shots see this thread.

E statuses:
E that is Green = connected and receiving data
E with a line under it = connected to an edge network
E with no line and not green = edge is available.

Radio Detection Colour Statuses Guide:

Red Circle: no radio is detected.
Blue Circle: radio detected ok and in Motorola USB Modem mode. (AT commands or QC test commands)
Green Circle: radio detected ok and in USB Composite Device mode. (Motorola P2K Test Commands)
Yellow Circle: radio is enumerated as a USB LAN device, but the socket connection is not yet successful (Motorola P2K or QC test commands in USB LAN mode).
Pink Circle: radio is enumerated as a USB LAN device and the socket connection was successful. (Motorola P2K or QC test commands in USB LAN mode)

Using Hyper Terminal to fix Phone Connection

If you have problems getting Radiocomm to recognize your phone (ie can not get detection button to turn green) then do the following:
Change your phone's USB mode to "modem"
Plug your phone into your computer
Check what COM port your phone is selected to. To do that go to Start-->Control Panel-->Phone & Modem Options and click on Modems tab. See what port the motorola USB modem is connected to.
In Windows go to Stat-->Run and type in hypertrm
A "New Connection" hyperterminal window should be displayed which will ask you to make a name. Type "home" or whatever you want and click on OK
Now it will ask you for connection details. The only info you need to change is the bottom field labelled "Connect using". Click on it to display drop-down list.
Select the correct COM port that your phone is currently connected to (eg COM5) then click on OK button.
A "Port Settings" window will be displayed. Just leave those settings alone and click OK
You should now be on main hyperterminal screen. To test that you are correctly connected, type AT and press Enter. Screen should display OK. (If screen will not permit you to type anything then either the phone is not in modem mode or you selected the wrong port. Recheck you connected to correct port).
You now need to connect to Motonet by typing ATMODE=13. It should respond by stating its connecting to motonet... If it does then you are done. Leave hyperterminal open as is and now launch radiocomm, you will notice that it will have like a pink/purple color now. That means the phone is connected.
Thats all, your phone should now be able to use Radiocomm.

If you are still having an issue with hyperterminal try restarting your phone, or deleting your drivers and starting over.

[mahmood_online2008]

K. HOW TO USE RADIOCOMM TO FIX VOICEMAIL AND NETWORK TIME BUGS
Alpha43 has written a script that will easily allow you to fix the Voicemail bug and enable the Network Time feature:

• Voicemail bug - a blank text message is sent to your phone every time you check your voicemail or someone leaves you a voicemail.
• Network Time Feature - connects to your mobile provider and updates the time automatically. It updates for Daylight savings time.

You run this script using Radiocomm so you must have Radiocom installed. See previous section for instructions on how to do this. You will follow exactly the same steps as described there, but instead of running the EDGE.tcs script you will run the script "Automatic Network Time & Voicemail Bug Version 1.tcs".
Go to the RADIOCOMM SCRIPT: Automatic Network Time + Voicemail Bug Script thread and download the file Automatic_Network_Time_&_Voicemail_Bug_Version_1.r ar
Unrar the file using winrar or 7-zip. You will get the following file "Automatic Network Time & Voicemail Bug Version 1.tcs"
Launch Radiocomm and wait for the green light as described in previous section
Follow exactly same steps as "Running the EDGE.tcs script" - but select a different button (label it "Voicemail") and select the "Automatic Network Time & Voicemail Bug Version 1.tcs" file instead.
Click on the button you labeled to run script. It should take no longer then 1-3 seconds.
After you run this script, you have to enable the Network Time feature. You do this by clicking on your World Clock or Time icon and clicking on the bottom left menu button-->Network Time and then enable it there.

See here for screenshots and more details if needed.

[mahmood_online2008]

L. HOW TO CHANGE AN APP'S ICON AND NAME
As you install various java apps, you will notice that many of them have lousy icons or the name of the application on the Menu page may be in a foreign language. Here is what you can do to fix this:

How to Change an Application's Name

There are two ways to change an application's name. One method is done after you install the app by editing the master registry file, CardRegistry. The other method is done by changing the app's name in the Jar File before installing it.

Method 1: Changing the name in the CardRegistry file

This is the simpler method and works for both J2ME apps and PKG packages:
1. Install the app
2. Plug your phone into your PC and using Windows Explorer navigate to .system/java/ on your SD card
3. Edit the file CardRegistry using Wordpad or UltraEdit (not Notepad or MSWord). Always make a backup of this file first in case you make a mistake!.

Look for the name you want to change and type over the name with what you want to call it (make sure you do not accidentallly add any spaces after the name):

Name = 新华 ==> Name = Smart Assistant

4. Save file and Reboot phone

When you turn phone back on, app should have new name in Application Manager.

Method 2: Change the Name in the JAR file before Installing

To do this will need to download and install the free utility 7-zip which permits you to open up the jar archive
Once you have 7-zip installed on your PC, locate the jar file you want to rename and right mouse-click on it and select “Open Archive”
This will show you the list of files inside the archive.
Click on the META-INF folder and then select the single file in that folder, MANIFEST.MF, and copy it to your desktop.
Right mouse click on the copied file and select “Open With” and select “Wordpad” (Important – do NOT use Notepad or MS Word).
Edit the file. Look for the line "Midlet-Name" and type in the name that you want the app to be called.
Save the file and then copy it back into the Archive.
Close the Archive and respond “Yes” if 7-zip asks if you want to save your changes.
Now install the *.jar file like you normally do and the name will be in English.
Note – if you already installed the app, then this will create a new icon with the new name. You will have to delete the old app.

You can also do the same thing with a PKG archive. It also can be opened with 7-zip. In this case you are looking for the file mpkgapp.desktop and edit the line “Name=”. Copy updated pkg file to phone and reinstall.

How To Change an Application's Icon.

To do this will need to download and install an icon editor. PhotoFilter is an excellent free one (download at

برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید

)

The simplest way is to change the icon is to do it once the app is installed on your phone.
Plug the phone into your PC in USB Mode so that the phone’s SD card is shown as a folder in Windows Explorer.
Use Windows Explorer to navigate to .system --> java --> DownloadApps
You will see a set of folders called \MIDletxxx where xxx is a set of numbers.( eg MIDlet2014). Each one of these folders is one of your installed java apps. The higher the number the more recent that app was installed.
Do a Search on the application’s name to find the correct.\MIDLETxxxx folder for that app.
Navigate to that folder and open the folder \Files. You will see all the files that that applet uses.
Locate the file suiteicon.png
Copy this to your desktop
If it does not exist then look for the file MIDlet-1.png and work with that instead. If neither exists then that app does not have an icon – it probably is displayed with a generic icon.
Open Photofiltre and open that file.
Resize the image to 48 x 48**
Resize the canvas (the pace the image sits on) to 64 wide x 48 high (this keeps the icon from being stretched and gives some blank space next to it.).
Make this extra bit of space on either side of the icon transparent (All of the buttons to do the last 3 commands are on the Photfiltre’s task bar).
Save
Copy back into folder on SD drive (Ensure it is the same CASE as before – Linux is case dependent. MIDlet-1.PNG is not the same as MIDlet-1.png)
Unplug the phone and turn it off and on. The icon should look great.
You can of course completely change the icon for anything of your choice (or create a brand new one if the applet is missing an icon)

** You may want to play around with the size. If the icon started very large, you may lose some detail if you shrink it too much – but if it is too big then it appears huge in the “Open with” menu. Another size you may want to play with is 32 x 32 (Canvas 42 x 32)


M. HOW TO TELENT TO YOUR PC
Telnetting allows you to send files directly to your phone (as opposed to just the SD card).

The SSHD method works as described by Bragon on this thread.

Just a few tips:
• Bragon´s instructions supposed that you already had a Telnet or some console but in A1200i none of the approaches works (except using MKEZX). So you will need to make scripts to run the commands.
• Make a script to copy/merge the keys

There is more information on how to do that on this thread.

Note: the method described on this thread does not work.

N. HOW TO "SEEM EDIT"
The seem is the individual pieces that make up the operating system on the phone. Every individual feature on your phone (SMS on/off, will the call end when you close the flip, can you access the web from your phone, etc.) is all editable by changing a seem. Seem editing permits you to change configuration settings directly on your phone. To learn how to "seem edit" - see this thread. This thread also has a big discussion on it.

Some "Seem edits" that work on the A1200:

• Flip close seem edit works

Element ID:0032
record #:0001
offset: 008A
length:0001

Click on RDELEM
Change DATA read from $40 to $44
Click on STELEM
------------------------------------------------------------------------------------------
• Time Auto upate

Element ID:0032
record #:0001
offset: 0000
length:0001

Click on RDELEM
Change DATA read from $D6 to $D7
Click on STELEM

Element ID:0032
record #:0001
offset: 0055
length:0001

Click on RDELEM
Change DATA read from $68 to $6C
Click on STELEM
---------------------------------------------------------------------------------------
• Cingular ENS

Element ID:0032
record #:0001
offset: 008B
length:0001

Click on RDELEM
Change DATA read from $00 to $10
Click on STELEM
---------------------------------------------------------------------------------------
• Voice mail bug fix

Element ID:0032
record #:0001
offset: 0002
length:0001

Click on RDELEM
Change DATA to :8B or 8b ( Test which one works for you)
Click on STELEM
--------------------------------------------------------------------------------------
• Roam triangle remove

Element ID:0032
record #:0001
offset: 0034
length:0001

Click on RDELEM
Change DATA to: $20
Click on STELEM

* Remember to Restart your phone after every seem edit so it can go into affect.*


O. HOW TO WRITE DIRECTLY TO PHONE'S MEMORY
Advanced Hackers Only!

There is a method that allows you to unlock the phone's flash-memory and write or erase arbitrary flash-region (mtd) directly on the phone without using PC or RSDLite. This is done using a tool called mtdtools. The link to this tool, plus instructions on how to do this can be found in thread.



================================================== ============================================
All of the information presented in this writeup was obtained from user's postings from the various threads on this forum. A best effort was made to ensure it is complete and accurate including performing all of the steps presented on my own phone - but there are no guarantees there are not errors!!

This Guide took many hours to research and put together. If you found the information useful, perhaps you would consider donating a few dollars to keep the Motorolafans site funded as it costs $60 each month in hosting fees. See the announcement at the top of the E6 forum for details on how to do this.



Thanks and Good luck!

[v_prances]

سلام به همگي بچه ها
بعد از مدتها يك بامعرفت كمكم كرد تا فريمور دستگاهم عوض كنم صداش و دوربينش خوب شده ولي فقط كمي زمينه دستاپ سياه شده .
از adame_haji خيلي خيلي سپاگزارم .
ياد بگيرن

[sshaffafi10]

سلام دوستان
اگر کسی فلس فایل فارسی تست شده که بشه باهاش اس ام اس فارسی خوند سراغ داره؟
لطفا راهنماییم کنید.
درسته که پست های من کمه.ولی اگه میشه کمکم کنید.کارم گیره.

[samboliya]

عزیز این همه فایل انگلیسی چیه اینجا کپی پیس کردی درسته تازه کاری ولی مثل اینکه بدجوری جو گرفتت اینجوری نه لینک کار میکنه نه ملت چیزی سر در میارن اگه لینک میدادی به سایت motofans بهتر نبود؟؟؟؟
و دوست عزیز دیگه فعلا به هیچ وجه نمیتونی رو این گوشی فارسی رو درست بخونی ولی با نصب فونت فارسی میتونی کارت رو از راست به چپ راه بندازی

[mazi_z_PSP]

خیلی ممنون من اینکارو کردم خیلی هم خوشم اومد
کلی برنامه و بازی باحال داشت
فقط یه کم باهاش مشکل دارم
یکی اینکه بعضی از برنامه هاش اجرا نمیشه
دوم اینکه از وقتی اینکارو کردم گوشیم یه مشکلی پیدا کرده که فکر میکنم نرم افزاری باشه، بعضی وقتا قاطی میکنه هرکی با موبایل بهم زنگ بزنه رد تماس میده جالب اینه که فقط در مورد موبایل اینطوره با تلفن ثابت مشکل نداره

منم نصب کردم . فريمورم 25pهست مشکلی هم ندارم. بعضی از برنامه ها کار نميکنه اما خوبه.
این مشکلی که شما ميگی هم ندارم.
در ضمن این چرتو پرتای انگليسی رو هم ديگه نذار. مگه چند نفر اینجا انگليسی بلدن؟

[mazi_z_PSP]

عزیز جان بذار ما هم یه شما رو .... کنیم
قلم یا همون styluse یا تو اونجا هر چی بهش میگی رو بر روی فایل مورد نظر قرار بده و نگهدرا تا مثل کلیک راست تو ویندوز اگه دیده باشی عمل کنه و یه منو وا بشه تا اپشن های مورد نظر رو مورد مصرف قرار بدی البته به تاریخ مصرف هم دقت کن یه موقع مسموم نشی
چاکریم

بابا این که ناراحتی نداره ..
کافیه قلم گوشیتو روی فایل یا فولدری که قصد ... داری نگه داری تا یه منو باز شه
اونوقت میتونی این کارهارو انجام بدی

بابا دستت هر 2 تاتون طلا. خداييش ديگه این يکی به فکرم نرسيده بود. حالا اگر ميشه جواب این پست هارو بدين. ممنون : 1133-1134-1138-1140

[mazi_z_PSP]

نرم افزار :
Zmplayer - Winamp old - Winamp New(With Head Set Supurt ) - Mpkg Installer - Superman - Quran (With Farsi translat) Calculatur(mashin hesab Mohandesi 2ta ) - Quisk not - Convertor - Draw Book - I lock (Screen Saver Iphonne )- File Manager

- ميشه دونه دونه هر بگی هر کدوم از این نرم افزار ها چه کاری انجام ميدن؟ ممنون

اگر ميتونيد به همه ی دوستان ميگم . فايل اینستالی تمام نرم افزار هايی که حاجی جان گزاشتن تو فايل سيستمشون رو بزاريد. خيلی لازم دارم. ممنون===================
يک سوال. فرض کنيد يک نرم بازی تو قسمت Officeنصب شده و من ميخوام آيکون اون رو ببرم به قستم Gameچيکار بايد بکنم؟

[adame_haji]

سلام به همگي بچه ها
بعد از مدتها يك بامعرفت كمكم كرد تا فريمور دستگاهم عوض كنم صداش و دوربينش خوب شده ولي فقط كمي زمينه دستاپ سياه شده .
از adame_haji خيلي خيلي سپاگزارم .
ياد بگيرن

خواهش میکنم
کاری نکردم عزیز

بچه ها اصلا فریمور عوض کردن کاری نداره
وسط کارم اگه 10 بار Faild بده نهایتا باطریتون تموم میشه و میشه بدید یه نفر باطریتون رو شارژ کنه و و دوباره ادامه بدید
میدونستید اکثر گوشی های موتورولای بازار باطریهاشون بهم میخوره !
مثل V3x

عزیز این همه فایل انگلیسی چیه اینجا کپی پیس کردی درسته تازه کاری ولی مثل اینکه بدجوری جو گرفتت اینجوری نه لینک کار میکنه نه ملت چیزی سر در میارن اگه لینک میدادی به سایت motofans بهتر نبود؟؟؟؟

ایول اینو خیلی باحال اومدی (دی)

سلام دوستان
اگر کسی فلس فایل فارسی تست شده که بشه باهاش اس ام اس فارسی خوند سراغ داره؟
لطفا راهنماییم کنید.
درسته که پست های من کمه.ولی اگه میشه کمکم کنید.کارم گیره.

نه برادر بیخیال فارسی سلیس و روان شو
فقط یه راه داره که فارسی رو فقط بتونی بخونی . اونم چپه . یعنی از چپ به راست
یا اینکه فریمور 24XP30 نصب کنی یا ایکنه برنامه Apply font رو نصب کنی که من راه اول رو انتخاب کردم

- ميشه دونه دونه هر بگی هر کدوم از این نرم افزار ها چه کاری انجام ميدن؟ ممنون

اگر ميتونيد به همه ی دوستان ميگم . فايل اینستالی تمام نرم افزار هايی که حاجی جان گزاشتن تو فايل سيستمشون رو بزاريد. خيلی لازم دارم. ممنون===================
يک سوال. فرض کنيد يک نرم بازی تو قسمت Officeنصب شده و من ميخوام آيکون اون رو ببرم به قستم Gameچيکار بايد بکنم؟

ببین دونه دونه گفتن نداره چون بازی ها که بازین بقیه هم از رو اسمشون میشه فهمید چه برسه که 1 بار بخواهید اجراشون کنید و خودت ببینیه چیه
تازه تموم این نرم افزار ها رو بچه ها صفحات قبل لینک دادن و توضیح کامل هم کنارش نوشتن
معلومه که هنوزم صفحات قبلو نخوندی !!!!!
اون تغییر مکان برنامه های نصب شده رو فکر نکنم امکان داشته باشه .
من هر چی گشتم چیزی نیافتم
بهترین راه اینه که پاک کنی و دوباره نصب کنی (راه حل رو حال اومدی )

راستی من تو کف این بازی رید دیک موندم . بیام تهران حتما یه نسخه میخرم (از روی تعرییفای تو تتوی کفش موندم (
یا علی