سلام
برای wireless
کد:
برای مشاهده محتوا ، لطفا وارد شوید یا ثبت نام کنید
برای lan
Steps to Connect your PC with LAN Internet Connection with Another PC
- At first, you need to go out and buy the straight patch Ethernet LAN cable. Make sure that “patch” or “crossover” is written on the cord.
- Connect them to both the computers.
- Go to “Network and Sharing Center” through the Control Panel.
- Select “Network Connection” and right click Local Area Network connection and select “Properties”
- Now select “Internet Protocol Version 4(TCP/IPv4)” and click “Properties”.
- Now, once you are inside the TCP/IP properties of your computer, click “Use the following IP” and enter 192.168.0.1 as IP address and 255.255.255.0 as subnet mask. Leave the other details blank and click “OK”
- Now go to TCP/IP properties of the second computer and enter the same details except the IP address, which should be 192.168.0.2 and click “OK”.
- Done. Now the networks are operatable. You might need to restart both the computers in some cases.
- Now, if you’re looking to SHARE the internet connection between 2 computers, go to Local Area Network properties again and click on the Sharing tab. Select “enable internet connection sharing”
- To share files and folders between the 2 computers, go to the properties of that file/folder and select Sharing tab. Click “Share” to share on the network.