سلام دوستان
اگر ميخواهيد از دماي cpu-hard dis-sestem-fan cpu
با خبر شيد ميتونيد از speed fan كه حجم كمي هم داره استفاده كنيد
البته نرم افزار sissoftهم همين كارو ميكنه ولي ساده نيست
Printable View
سلام دوستان
اگر ميخواهيد از دماي cpu-hard dis-sestem-fan cpu
با خبر شيد ميتونيد از speed fan كه حجم كمي هم داره استفاده كنيد
البته نرم افزار sissoftهم همين كارو ميكنه ولي ساده نيست
عکس؟
لینک دانلود؟
؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟
دوست عزیز من یک فایل exe از ان را در سایت زیر اپلود کردم نمیدونم کار کنه یا نه
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
پس چرا معرفی کردی آخه ؟!
اخه من برنامه کاملش را دارم و الان هم برام خوب کار میکنه سعی میکنم برنامه کاملش را اپلود کنم
چون در اپلود برنامه ها تازه کارم
خب منم يكم لينك اينا بزارم
اين برنامه speed fan يكي از بهترن برنامه ها براي نمايش درجه حرارت سي پي و ادر بود و ..ست با نمايش نودار و قابليت اور كلاك كردن سي پي يو بر حثب مادر برود كم و زياد كردن دور فن !!
SpeedFan 4.31.
سايت برنامه:
دانلود اخرين نسخه:کد:http://www.almico.com/speedfan.php
کد:http://www.almico.com/speedfan431.exe
ممنون دوست عزیز خیلی بهش نیاز داشتم دارم میدانلودمش!! [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
SpeedFan 4.32 Final
SpeedFan 4.32 Final is available. This release includes a lot of improvements. New hardware monitor chips are fully supported, like ADM1026, ADT7473, MAX6640 and SCH311x. Added full support for Intel 631xESB and improved support for ICH7-M. Fixed support for other chips and added new advanced settings for some of them. Added full support for the internal temperature sensor from K8 chips on multiprocessor systems. There are several bug fixes and performance improvements too.
SpeedFan 4.32 Final:
- added detection and support for internal temperature sensors on multiprocessor AMD K8 (Sempron, Athlon 64 and Opterons) systems
- added full support for ADM1026
- added full support for SMSC SCH311x
- added full support for MAX6640
- added full support for INTEL 631xESB SMBus
- added full support for ADT7473
- added LPC47M534 fan support
- ADT7473 and ADT7476 temperatures now properly handle offset 64 setting
- fixed W83637HF PWM MODE 3 and PWM 3 ENABLE setting
- fully verified DFI LP NF4 support
- added a check to skip SCSI disks that return invalid LOG SENSE pages (usually are EIDE/SATA disks where the driver tries to emulate some SCSI specific calls)
- added preliminary detection of NS PC8374L, NS PC87427 and WINBOND W83627DHG
- added an additional check in LM80 detection to avoid some false positives
- improved ICH7-M support
- added /NOAMDK8SCAN command line switch
- 100% fan speeds on program exit is no longer a default
کد:http://www.almico.com/speedfan432.exe
SpeedFan v4.33 Final
What's new:
- completely rewritten the detection and the identification strategy of ITE IT871xF chips (fan readings are now ok)
- xAP support is now properly reenabled between sessions
- fixed context sensitive help (F1 key) on Windows Vista
- enabled, if needed, the SMBus on Intel ICH7 and ICH8-M
- added several checks to CPU usage routines, fixing a nasty issue where an error window appeared once every second
- added full support for ATI SB600 SMBus
- added full support for Intel ICH9 SMBus
- added full support for nVidia MCP55 SMBus
- added sull support for ADT7475
- added nVidia Control Panel access to read video card temperatures
- supported the IT8716F and the IT8718F hardware monitor at unusual addresses
- added some SMB scan exceptions for Compal 08A0
- SMBus address $15 no longer scanned on AOpen i975Xa-YDG
- fixed an issue that caused the DFI LP UT NF4 SLI-DR Venus to power off on program start
- added support for Fintek F71872F voltage readings
- IT8712F-J now uses two undocumented FAN DIVs
- speeded up Asus M2N32-SLI DELUXE program startup
- added detection of an unknown Fintek chip (to avoid false detection of other sensors at the same address)
- W83627EHF and W83627DHG now properly show SMARTFAN III in CONFIGURE / ADVANCED
- W83627EHF and W83627DHG can now change PWM TYPE from PWM to DC in CONFIGURE / ADVANCED
- fixed FAN DIVISOR settings for Winbond W83791D
- added PWM OUT BASE CLOCK selection for WINBOND W83627DHG, W83627EHF and W83627EHG
- warning temperature can now be set as high as 125C in CONFIGURE
Download:
کد:http://www.almico.com/speedfan433.exe
کد:http://www.almico.com/installspeedfan434.exe
شما باید لینک رو تو ادرس بار مرورگرتون وارد کنید و enter کنید
یا به این صفحه برید و روی لینک آبی رنگ speedfan 4.34 کلیک کنید.
کد:http://www.almico.com/sfdownload.php
SpeedFan 4.35 Final
کد:http://www.almico.com/speedfan435.exe
SpeedFan v4.36 Beta 8
- Added support for ALL nVidia video cards, for SMSC EMC6W201, for SMSC EMC2710P and for the latest AMD K11.
* register for free to get the download
کد:http://www.almico.com/sfbetaprogram.php
SpeedFan 4.36 Beta 10
کد:http://www.almico.com/sfbetaprogram.php
SpeedFan of 4.35 Final
کد:http://rapidshare.com/files/141538609/installspeedfan435.rar
کد:http://www.almico.com/speedfan436.exe
SpeedFan 4.37
کد:http://www.almico.com/speedfan437.exe
SpeedFan 4.38 Final
Changes in v4.38:
- added full support for AMCC/3ware SMART readings
- added full support for Intel QST
- added full support for ADT7470
- added full support for ADT7462
- added full support for nVidia MCP79 SMBus
- added full support for SiS968 SMBus
- added full support for Intel i7 internal core temperature reading
- improved ITE IT8720F identification
- added Fintek F71858 temperature readings
- PC87360, PC87362, PC87363, PC87364, PC87366 do hide unavailable readings now
- ProbeGL5xxSM now checks some more registers to try to avoid false detections
- improved CPU identification routines
- improved FB-DIMM support on some Intel chipsets
- the exotics tab now shows the fitness of the hard disks connected to ARECA RAID controllers too
- ARECA and AMCC/3WARE connected hard disks are now searched before the standard channels, trying to avoid aliased, merged or fake reported SMART data
- added identification of Fintek F75125R
- removed two debug messages related to UGURU3
- added some debug code to try to support VIA CX700/VX700 SMBus
- DELL SUPPORT is now checked on ATI SBx00, Intel 631xESB, ICH8, ICH9 and ICH10 too
- disabled DELL support on 64 bit systems
- added /NODELLSCAN command line parameter
- fixed daylight saving time handling in event emails
- added full support for Windows 7 32 and 64 bit
- fixed a minor bug that caused the main window to be minimized when clicked
- CONFIGURATION / SPEEDS SpinBoxes now allow manual edit
- added some scan exceptions for Asus M2N-E and for Dell 0G841G
- INSTALLER: improved OS identification
- INSTALLER: fixed the ADMIN identification issue
کد:http://www.almico.com/speedfan438.exe
SpeedFan v4.39 | 1.80 MB
کد:http://filepig.org/categories/28/318/7525/installspeedfan439.exe
http://www.majorgeeks.com/SpeedFan_d337.html
SpeedFan v4.40
کد:http://rapidshare.com/files/312322987/installspeedfan440.exe | 1891 KB
SpeedFan 4.41 Final
[PHP]http://www.almico.com/installspeedfan441.exe[/PHP]کد:4.41
- added full support for Intel 5 Series/3400 Series SMBus
- added full support for Intel QST 2.x
- added full support for fan control for Intel QST
- added full support for Fintek F71889F
- added full support for Fintek F71889ED
- added full support for SB8x0 SMBus
- added full support for Nuvoton W83677HG-I
- added full support for Nuvoton W83667HG-B
- added SB7xx/8xx PM2 fan speed readings and fan control
- added full support for MCP98242
- added full support for CAT34TS02
- added support for ITE IT8721F
- added support for USB hard disk enclosures with Cypress chipset
- added W83791D advanced settings for PWM MODEs
- improved ADT7490 PWM MODE advanced settings
- added ADVANCED options for Fintek F75387 PWM MODEs
- fixed Fintek F75387F PWM setting
- enabled SMBus on Intel ICH9-M, if needed
- added detection of LIS331DL
- added Intel QST 2.x advanced option to revert back to AUTO fan control
- upon resume from suspend only those fans that are automatically variated are initially set to 100%
- identified more CPUs
- Intel Atom Series 300 Tjmax set to 90C
- HECI support works only on Windows 2000 and later
- AMCC/3ware support works only on Windows 2000 and later
- added more names for SMART attributes
- added a new option to CONFIGURE / OPTIONS to disable SMART Summary Error Log on program start (this can dramatically improve SpeedFan startup time)
- the UI is now updated whenever new SMART data is read from the selected hard disk
- now, in CONFIGURE / EVENTS, when you press UPDATE to change some event, the editing fields are automatically cleared and the OK button is automatically enabled
- restored access to SMART attributes on AdvSmart, Areca and AMCC/3ware connected drives in Event configuration window
- events can now react to FITNESS and PERFORMANCE values of SMART hard disks
- added NOADVSMARTSCAN command line switch
- the first line of the email sent by an EVENT now has been changed to include the Machine Name
SpeedFan 4.43 Final
کد:http://www.almico.com/installspeedfan443.exe
محتوای مخفی: 4.43
SpeedFan 4.43
Size: 2.0 MB
کد:http://uploadorb.com/pmjo57xwb5a4
SpeedFan 4.44
کد:http://www.filehippo.com/download_speedfan
SpeedFan 4.45 Beta 4 1.8 MB
کد:http://www.softpedia.com/get/System/System-Info/SpeedFan.shtml
SpeedFan 4.45
کد:http://www.filehippo.com/download_speedfan/
SpeedFan 4.46 Final
کد:http://rapidgator.net/file/1430887/speedfan446.rar.html
SpeedFan 4.47 Beta 2 / 4.46
کد:http://rapidgator.net/file/11241259/SpeedFan_4.47_Beta_2._4.46.rar.html
SpeedFan 4.47کد:http://www.filehippo.com/download_speedfan/
SpeedFan 4.48 Beta 4
کد:http://turbobit.net/31q56qe575ds.html
SpeedFan 4.48
کد:http://www.almico.com/sfdownload.php
SpeedFan 4.49
کد:http://www.almico.com/sfdownload.php