Ubuntu

اول یه انتقاد بکنم از دوستان که گزارش‌هایی که از مشکلاتشون می‌زارن بیشترش نامفهومه خواهشا بیشتر دقت کنید

نقل قول:

نوشته شده توسط Zalamen [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

من لان با CD نصب نمی کنم.با این نصب میکنم:
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
با اون برنامه ی Install Ubuntu..که هر دفعه هم وارد سیستم عامل میشم اجرا میشه.

کد:

http://up.-------------.com/images/deh1m6qomiroox0x5h6w.png

اولیش همین
آدرس تصویری هم که گذاشتی خراب شده هیچی معلوم نیست
بهتره تصویر رو یه جای دیگه آپلود کنی

نقل قول:

نوشته شده توسط mahfa2236 [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

direct rendering: Yes
GL_EXT_Cg_shader, GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,

Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection

Section "Module"
Load "glx"
EndSection

Section "Device"
Identifier "Default Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection

من همین الان نگاه کردم اوبونتو به صورت پیش فرض روش compiz داره
نمی‌دونم دیگه شما مشکلت از کجاست

نقل قول:

نوشته شده توسط Zalamen [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

سلام.
من چه طوری میتونم Scrolling با اون غلتک موس رو فعال کنم؟الان برام غیر فعاله.
سپوال دیگه:الان اوبونتو درایو های منو با اسم هایی مثل ۹۴GB File System نشون میده چه طوری میتونم اسم ها رو درست کنم؟
الان توی بعضی از سایت ها فارسی رو جدا جدا نشون میده چه جوری باید این رو درست کنم؟

جواب سوال اول
داخل فایل etc/X11/xorg.conf/ رو نگاه کن یه قسمت داره واسه تنظیمات موس که اینطوری باید باشه(تنظیمات یک موس معمولی):

کد:

Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection

این مال خودمه و درست کار می‌کنه اگر اینطوری نبود درستش کن و باید مشکلت حل شه مگر اینکه در برنامه خاصی این مشکل رو داشته باشی
در جواب سوال دوم:
این lable پارتیشت هست که نشون می ده
می تونی با برنامه gparted عوضش کنی فقط موقع کار کردن با برنامه gparted مواظب باش
جواب سوال آخرتم اینه که باید فونت نصب کنی
فونت‌‌ها (مخصوصا tahoma) رو کپی کن توی home/$USER/.fonts/ بعد دستور fc-cache -f -v رو اجرا کن و یه بار هم relog کن

نقل قول:

نوشته شده توسط mahfa2236 [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

طبق دستوراتی که گفته شد بنده lampرو نصب کردم اما برای phoadminانگار نشد که نشد پیام خطا هم اینه
Not Found

The requested URL /phpadmin was not found on this server.
Apache/2.2.17 (Ubuntu) Server at localhost Port 80دقیقا همه کارایی که باید انجام میدادم رو انجام دادم اما نشد
البته جواب

کد:

http://localhost/info.phpرو

میده ودرسته .
راستش هم من میخوام که با phpبرنامه بنویسم و تو وب ازش استفاده کنم اما نمیدونم کجا اصلا باید کدها رو نوشت که اجرا بشه اگه اینرو هم بفرمایید ممنون دار میشم.
در ضمن بعد از نصب برنامهcactiو استفاده از کد

کد:

http://cacti-server-ip-address.com/cacti/install/index.phpهیچیرو

برام باز نمیکنه نمیدونم چرا از هر راهی میرم آخرش یهجا گیر مییفتم

راستش من نمی‌دونم برنامه phpadmin چی هستش شاید منظورت phpmyadmin باشه
اگر نه لینک بده
خوب هر برنامه نویسی می‌دونه که برنامه رو باید تو editor نوشت یا تو ide خاص اون زبون
ما ادیتور‌های زیادی تو گنو/لینوکس داریم
شما می‌تونی از vim یا gedit استفاده کنی
برنامه رو بنویس بعد با پسوند php در var/www/localhost/ ذخیره کن
بعد توی مرورگر بزن

کد:

http://localhost/filename.php

البته باید قبلش آپاچی برای استفاده از php تنظیم و اجرا شده باشه
:46:

etc/X11/xorg.conf
من این رو توی ترمینال وارد میکنم یک فایل متنی باز میشه اون متنی که شما نوشتین رو توش بنویسم درست میشه؟
توی این فایل متنی از اول این هست:

کد:

Section "Device" Identifier "Default Device" Option "NoLogo" "True" EndSection

با سلام خدمت دوستان
من دیشب اوبونتو 11.04 رو نصب کردم اما درایو کات گرافیک نمی دونم چرا نصب نمیشه
البته مثل ویندوز انگار درایوش نصب هست

[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

اما توی قسمت apperance اصلا چیزی برای اتخاب حالتهای extra و مدیوم کارت گرافیک نیست

در حین نصب هم چند تا دو تا حالت 1 و 2 داشت

کد:

k1lou@k1lou:~$ sudo -i [sudo] password for k1lou: root@k1lou:~# sh /home/k1lou/ati-driver-installer-11-5-x86.x86_64.run Created directory fglrx-install.aAQ985 Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.85...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Detected configuration: Architecture: i686 (32-bit) X Server: X.Org 6.9 or later ----====== ATI Catalyst(TM) Proprietary Driver 8.85 installation program ======---- You are running a x86 machine with libc5 Hit Control-C anytime to cancel this installation program. ATI Catalyst(TM) Proprietary Driver 8.85 1) Install Driver 8.85 on X.Org 6.9 or later 2) Generate Distribution Specific Driver Package Please choose the product to install, or Q to quit. [1] 2 loki_setup: directory: (null) ----====== ATI Catalyst(TM) Proprietary Driver 8.85 installation program ======---- You are running a x86 machine with libc5 Hit Control-C anytime to cancel this installation program. AMD Software End User License Agreement PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY DOWNLOADING, INSTALLING, COPYING OR USING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, SIGNIFY YOUR AGREEMENT BY CLICKING THE "AGREE/ACCEPT" BUTTON. IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE, PROMPTLY RETURN THE SOFTWARE TO THE PLACE WHERE YOU OBTAINED IT AND (IF APPLICABLE) YOUR MONEY WILL BE REFUNDED OR IF THE SOFTWARE WAS ACCESSED ELECTRONICALLY CLICK "DISAGREE/DECLINE". 1. License. Advanced Micro Devices, Inc., on behalf of itself, its subsidiaries and licensors (referred collectively as "AMD") grants to you the following non-exclusive, right to use the software accompanying this License (hereinafter "Software") subject to the following terms and limitations: (a) Regardless of the media upon which it is distributed, the Software is licensed to you for use solely in conjunction with AMD hardware products to which the Software relates ("AMD Hardware"). Do you agree with the license? [Y/n] y Please enter the installation path [/] home No write permission to home/ Please enter the installation path [home/]

کد:

k1lou@k1lou:~$ sudo -i [sudo] password for k1lou: root@k1lou:~# sh /home/k1lou/ati-driver-installer-11-5-x86.x86_64.run Created directory fglrx-install.aAQ985 Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.85...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Detected configuration: Architecture: i686 (32-bit) X Server: X.Org 6.9 or later ----====== ATI Catalyst(TM) Proprietary Driver 8.85 installation program ======---- You are running a x86 machine with libc5 Hit Control-C anytime to cancel this installation program. ATI Catalyst(TM) Proprietary Driver 8.85 1) Install Driver 8.85 on X.Org 6.9 or later 2) Generate Distribution Specific Driver Package Please choose the product to install, or Q to quit. [1] 2 loki_setup: directory: (null) ----====== ATI Catalyst(TM) Proprietary Driver 8.85 installation program ======---- You are running a x86 machine with libc5 Hit Control-C anytime to cancel this installation program. AMD Software End User License Agreement PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY DOWNLOADING, INSTALLING, COPYING OR USING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, SIGNIFY YOUR AGREEMENT BY CLICKING THE "AGREE/ACCEPT" BUTTON. IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE, PROMPTLY RETURN THE SOFTWARE TO THE PLACE WHERE YOU OBTAINED IT AND (IF APPLICABLE) YOUR MONEY WILL BE REFUNDED OR IF THE SOFTWARE WAS ACCESSED ELECTRONICALLY CLICK "DISAGREE/DECLINE". 1. License. Advanced Micro Devices, Inc., on behalf of itself, its subsidiaries and licensors (referred collectively as "AMD") grants to you the following non-exclusive, right to use the software accompanying this License (hereinafter "Software") subject to the following terms and limitations: (a) Regardless of the media upon which it is distributed, the Software is licensed to you for use solely in conjunction with AMD hardware products to which the Software relates ("AMD Hardware"). Do you agree with the license? [Y/n] y Please enter the installation path [/] home No write permission to home/ Please enter the installation path [home/] / Option: 'RedHat Packages' ? [Y/n] y Option: 'RedHat/RHEL5_64a' ? [N/y] y Option: 'RedHat/RHEL6_64a' ? [N/y] y Option: 'RedHat/RHEL5' ? [N/y] y Option: 'RedHat/RHEL6' ? [N/y] y Installing to / 6447 MB available, 1 MB will be installed. Continue install? [Y/n] y Generating package RedHat/RHEL5_64a Installing RedHat/RHEL5_64a ... 100% - //usr/share/ati//ATI_LICENSE.TXT Generating package RedHat/RHEL6_64a Installing RedHat/RHEL6_64a ... 100% - //usr/share/ati//ATI_LICENSE.TXT Generating package RedHat/RHEL5 Installing RedHat/RHEL5 ... 100% - //usr/share/ati//ATI_LICENSE.TXT Generating package RedHat/RHEL6 Installing RedHat/RHEL6 ... 100% - //usr/share/ati//ATI_LICENSE.TXT 100% - //usr/share/ati/ATI_LICENSE.TXT Installation complete. There were errors during installation. Details can be found in /usr/share/ati/fglrx-install.log [Press Enter] For further configuration of the driver, please run aticonfig from a terminal window or AMD CCC:LE from the Desktop Manager Menu. Removing temporary directory: fglrx-install.aAQ985 root@k1lou:~#

کد:

Enable/disable stereo support. Enable active option only for applications that support the use of hardware 3D shutter glasses. For the use of passive, passiveInvertHorz, passiveInvertVert, horizontalInterleave and verticalInterleave modes specialized monitor equipment is required. --resolution=Screen#,W1xH1,W2xH2,W3xH3,... Set the modes for the specified screen. You may specify several resolutions separated by commas. Screens start at 0. You can use 1 for dual-head --hsync=Screen#,LOW-HIGH Change the horizontal sync range of the specified monitor. Make sure you know the capabilities of your monitor before changing this option. Screens start at 0. You can use 1 for dual-head --vrefresh=Screen#,LOW-HIGH Change the vertical refresh range of the specified monitor. Make sure you know the capabilities of your monitor before changing this option. Screens start at 0. You can use 1 for dual-head --hsync2=LOW-HIGH Change the horizontal sync range of the second display. Make sure you know the capabilities of your monitor before changing this option. --vrefresh2=LOW-HIGH Change the vertical refresh range of the second display. Make sure you know the capabilities of your monitor before changing this option. --mode2=W1xH1,W2XH2,W3xH3,... Change the modes for the second display. You may specify several resolutions separated by commas. Only valid for clone and big desktop settings. --screen-layout={left|right|above|below} Set the secondary screen position for dual head. --screen-overlap=NUM Set the screen overlap region in big desktop mode to be NUM pixels. Advanced Options: --sync-video={on|off} Enable/disable sync to vsync for AVIVO video. This option is enabled by default and is used to prevent video tearing. By disabling this option video is free to render as fast as the 3D engine can handle. In the case of choppy video try to disable sync-video. --tls={on|off} Enable/disable fast thread local storage. Disable this option when virtual machines or WineX fail to work properly. --sb, --signal-block={on|off} Enable/disable signal blocking. Disable this option when debugging a multi-threaded OpenGL application. --locked-userpages={on|off} Enable/disable locked user pages. Disable this option if the system hangs when running fgl_glxgears. User page lock is no longer available on AGP system now. --max-gart-size=VALUE1,VALUE2 Set user-defined max total GART size(VALUE1) and cacheable gart size(VALUE2) for non-AGP systems. This option can combined with --adapter option to set the gart size for individual card. Dynamic Display Management Options: Following options will not change the config file. They are used for querying driver, controller and adaptor information. These options will be effective immediately. Other options on the same command line will be ignored. --enable-monitor=STRING,STRING Setting current monitor to be enabled. Only 2 displays can be enabled at the same time. Any displays that are not on the list will be disabled. STRING can be one of the following set, separated by commas: none crt1 crt2 lvds tv cv tmds1 tmds2 tmds2i dfp3 dfp4 dfp5 dfp6 auto -- use default policy to enable the displays. --query-monitor This will return connected and enabled monitor information --swap-monitor This only works for big desktop setup. This will swap the contents on the two monitors. --swap-screens={on|off} Enable/disable swap heads in dual-head mode. This option works only in dual-head mode. Pair mode options: Following options are used for query add and remove pair modes. These options will be effective immediately. Other options on the same command line will be ignored. --list-pairmode list all the current existing pair modes the driver can use. --add-pairmode=width0xheight0+width1xheight1 Add one pair mode to the list. width0 and height0 are the size of primary display and width1 and height1 for the secondary display. --remove-pairmode=index Remove one pair mode from the list. User can get index by list-pairmode. External Events Daemon Options: Following options will not change the config file. They are used to send commands to the atieventsd external events daemon. --set-policy=STRING Sets the event policy for the daemon to be STRING. See the atieventsd(8) manpage for further details. Display attribute options: Following options are used for query and set adjustment of specific attribute for specific display. These options will be effective immediately. Other options on the same command line will be ignored. The DISPLAYTYPE in options can be one of the following strings: crt1, lvds, tv, cv, tmds1, crt2, tmds2, tmds2i, dfp3, dfp4, dfp5, dfp6 . The ATTRIBTYPE in options can be one of the following strings: brightness, contrast, saturation, hue, positionX, positionY, sizeX, sizeY, overscan, videoStandard --query-dispattrib=DISPLAYTYPE,ATTRIBTYPE query the specific adjustment info of the specific display. if ATTRIBTYPE is not specified, all supported attribute information will be printed out. --set-dispattrib=DISPLAYTYPE,ATTRIBTYPE:VALUE set the attribute value of the specific display. Connector type options: Following options are used for query connector type for specific display. These options will be effective immediately. Other options on the same command line will be ignored. The DISPLAYTYPE in options can be one of the following strings: crt1, lvds, tv, cv, tmds1, crt2, tmds2, tmds2i, dfp3, dfp4, dfp5, dfp6 . --query-connectortype=DISPLAYTYPE query the connector type of the specific display. Component video dongle options: Following options are used for query and set dongles for a component video. These options will be effective immediately. Other options on the same command line will be ignored. --query-cvdongle query dongle setting informations of the component video. --set-cvdongle=VALUE set the custom override value of the CV dongle. --reset-cvdongle reset the custom override setting(to zero)of the CV dongle. Component video customized mode options: Following options are used for query and set customized mode for component video. These options will be effective immediately. Other options on the same command line will be ignored. --query-cvmode query customized modes for component video. --add-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEDHEIGHT,REFRESH. add a customized mode for component video. --validate-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEHEIGHT,REFRESH. validate a customized mode for component video. --delete-cvmode=INDEX delete one customized mode for component video. Persistent Configuration Store (PCS) Options: Following options will not change the config file. They are used to manipulate the PCS database. Due to their nature, these. commands may only be run by the root user. Note that the prefix and key names are not case-sensitive. --get-pcs-key=PREFIX,KEY Prints out the specified prefix and key from the PCS database. The type of data will be shown along with the contents. --set-pcs-u32=PREFIX,KEY,VALUE --set-pcs-val=PREFIX,KEY,VALUE (deprecated) Sets an integer value at the specified prefix and key in the PCS database. The value may be specified in hex by prefixing it with 0x or in octal by prefixing it with 0, otherwise the value is assumed to be in decimal. Note that --set-pcs-val is deprecated and --set-pcs-u32 should be used instead. --set-pcs-val will be removed soon. --set-pcs-u32array=PREFIX,KEY,VALUE[,VALUE]... Sets an array of integer values at the specified prefix and key in the PCS database. The values may be specified in hex by prefixing it with 0x or in octal by prefixing it with 0, otherwise the value is assumed to be in decimal. (e.g. --set-pcs-u32array="TestSection,TestData,1,0x2,3") --set-pcs-str=PREFIX,KEY,STRING Sets a string value at the specified prefix and key in the PCS database. --set-pcs-raw=PREFIX,KEY,HEXSTRING Sets a raw binary value at the specified prefix and key in the PCS database. The value is specified as a series of hex bytes with no 0x or spaces. (e.g. --set-pcs-raw="TestSection,TestData,E84C0E" sets 3 bytes) --set-pcs-bool=PREFIX,KEY,VALUE Sets a boolean value at the specified prefix and key in the PCS database. The value may be specified as either "true", "yes", "on", "enable" or "1" meaning boolean TRUE or "false", "no", "off", "disable" or "0" meaning boolean FALSE. --del-pcs-key=PREFIX,KEY Deletes the specified prefix and key from the PCS database. Multiple display adapter options: Following options are used for querying and setting up multiple display adapters that are installed for multihead or Crossfire configurations. --lsa, --list-adapters Lists all detected and supported display adapters. The default adapter (used when --adapter is not specified) will be indicated with a "*" next to it. --adapter=ADAPTERLIST Selects which adapters returned by --list-adapters should be affected by other aticonfig options. ADAPTERLIST contains either a comma-seperated sequence of the index numbers of the adapters to be affected or else contains the keyword "all" to select all the adapters. If --adapter is missing, only the default adapter will be affected. --lscc, --list-crossfire-candidates Queries the driver to determine the pool of available devices that can can be chained together for CrossFire. --lscs, --list-crossfire-status List current Crossfire status (enabled or disabled) along with diagnostics information indicates the status of your system --lsch, --list-crossfire-chains Lists the CrossFire chains that are currently defined along with their enabled state --cfa, --add-crossfire-chain Defines a new CrossFire chain. --adapter should contain the adapter chain definition, with the master adapter being the first entry and the slave adapters being the subsequent entries in order of priority. --cfd, --delete-crossfire-chain Delete and existing defined CrossFire chain. --adapter should list the master adapters of the chains to be deleted. --adapter=all will delete all chain definitions. --cf, --crossfire={on|off} Enables/disables CrossFire support on the currently defined CrossFire chains. --adapter should list the master adapters to be enabled or disabled. --cfl, --crossfire-logo={on|off} Enables/disables the appearance of the CrossFire Logo when rendering in CrossFire mode ATI Overdrive (TM) options: The following options are used to get and set current and peak, core and memory clock information as well as read the current temperature of adapters. By using the "--adapter=" argument the ATI Overdrive (TM) options can be targeted to a particular adapter in a multi-adapter scenario. If no adapter is explicitly targeted the commands will be run on the Default adapter as indicated by the "--list-adapters" command --od-enable Unlocks the ability to change core or memory clock values by acknowledging that you have read and understood the ATI Overdrive (TM) disclaimer and accept responsibility for and recognize the potential dangers posed to your hardware by changing the default core or memory clocks --od-disable Disables ATI Overdrive(TM) set related aticonfig options. Previously commited core and memory clock values will remain, but will not be set on X Server restart. --odgc, --od-getclocks Lists various information regarding current core and memory clock settings. Including: current and peak clocks the theoretical range clocks can be set to the current load on the GPU --odsc, --od-setclocks={NewCoreClock|0,NewMemoryClock|0} Sets the core and memory clock to the values specified in MHz The new clock values must be within the theoretical ranges provided by --od-getclocks. If a 0 is passed as either the NewCoreClock or NewMemoryClock it will retain the previous value and not be changed. There is no guarantee that the attempted clock values will succeed even if they lay inside the theoretical range. These newly set clock values will revert to the default values if they are not committed using the "--od-commitclocks" command before X is restarted --odrd, --od-restoredefaultclocks Sets the core and memory clock to the default values. Warning X needs to be restarted before these clock changes will take effect --odcc, --od-commitclocks Once the stability of a new set of custom clocks has been proven this command will ensure that the Adapter will attempt to run at these new values whenever X is restarted --odgt, --od-gettemperature Returns the temperature reported by any thermal sensors available on the adapter. ACPI Options: --acpi-services=on|off Enable/disable ACPI services. In the case of BIOS or kernel ACPI issues, ACPI services in the driver can be disabled through this option. The ACPI services are enabled by default. --acpi-display-switch=on|off Enable/disable display switching with ACPI methods on mobile platforms. This option is enabled by default. Genlock/Framelock options: The following options are used to control operation with GLSYNC module in the system. By using the "--adapter=" argument --glsync-getconfig, --glsync-setconfig, --glsync-getgenlock, --glsync-setgenlock options can be targeted to a particular adapter in a multi-adapter scenario. If no adapter is explicitly targeted the commands will be run on the Default adapter as indicated by the "--list-adapters" command --glsync-getport={RJ45_1 | RJ45_2 | BNC} Get configuration state for specified GLSync port. Including: Number of LEDs Scanned frequency Signal Source for RJ45 port if it is configured as output Port state (Input or Output) for RJ45 port Signal type for BNC port --glsync-setport=port_type,cntl,sig_src Set configuration for specified GLSync port Parameters: port_type - RJ45_1 or RJ45_2 only RJ45 ports can be configured cntl - 0 if port is configured as input or 1 if port is configured as output sig_src - signal source for GL Sync port if 0-3 - GPU port index if RJ45_1, RJ45_2 or BNC - another GL Sync port if -1 - signal source is undefined --glsync-getconfig Get timing configuration for particular GL Sync connector Including: Sync Delay in ms Signal Source Sample Rate Sync field Trigger Edge Scan Rate multiplier GPU port index this adapter connected to --glsync-setconfig=delay,fr_cntl,sig_src,smpl_rate,fld,edge,coef Set timing configuration for GL Sync connector Parameters: delay - Sync Delay in ms fr_cntl - Enable/Disable framlock control 0 Disable Framelock 1 Enable Framelock sig_src - Signal Source for this adapter. if 0-3 - GPU port index. It can not be GPU port index of this adapter if RJ45_1, RJ45_2 or BNC - GL Sync port if -1 - signal source is undefined smpl_rate - Sample Rate for sampled sync signal. 0 for no sampling fld - Sync field for interlaced sync signal. 0 if sync field is undefined 1 if synced to both field 2 if synced to field 1 edge - it is defined which signal edge should trigger syncronization 0 if edge is undefined 1 if it is triggered by raising edge 2 if it is triggered by falling edge 3 if it is triggered by both edges coef - Scan Rate multiplier applied to sync signal 0 if coef is undefined 1 if coef is 5 2 if coef is 4 3 if coef is 3 4 if coef is 2.5 5 if coef is 2 6 if coef is 1.33 7 if coef is 1.25 8 if coef is 1. 9 if coef is 0.8 10 if coef is 0.67 11 if coef is 0,5 12 if coef is 0.4 13 if coef is 0.33 14 if coef is 0.25 15 if coef is 0.2 Note: Some parameters may not be valid for manual configuration. Please use --glsync-getconfig command to verify. --glsync-getgenlock=disp_type Get genlock mode for particular display disp_type - Display Type. When RandR 1.2 and above is enabled can be query by using xrandr -q command. If RandR 1.2 is not enabled aticonfig --query-monitor command should be used to query this parameter --glsync-setgenlock=disp_type,mode,timing_server Set genlock mode for particular display Parameters: disp_type - Display Type. When RandR 1.2 and above is enabled can be query by using xrandr -q command. If RandR 1.2 is not enabled aticonfig --query-monitor command should be used to query this parameter. mode - Enable/Disable Genlock 0 Disable Genlock 1 Enable Genlock timing_server - Enable/Disable timing server 0 to configure display as free run 1 to configure display as a timing server --glsync-restart Reinitialized all genlock settings after power down system X Server Options: --xinerama={on|off} Enable/disable Xinerama (MultiView) in the X Server configuration file. MultiView allows for the merging of independent desktop heads into a unified workspace allowing windows to freely cross X Screen boundaries. Uninstall options: --uninstall{=force|dryrun} dryrun tests uninstall but does not uninstall. force removes all installed files without verification. Uninstall without an option tries to perform the default uninstall procedure. Miscellaneous Options: -v, --verbose Show what aticonfig is doing. -q, --quiet Disable all information output except for errors. --effective={now,startup} Choose when the requested changes should take effect. now: Immediately. This change will affect the running X session if applicable. Only 'set-powerstate' and 'overlay-on' are applicable for now. startup: On future X server startups. This change will modify the X server configuration file if applicable. The default is 'now,startup', i.e., do both as applicable. --nobackup Do not make an automatic backup of the configuration file. -i, --input=FILE Select a FILE to input as the configuration file. Set FILE to '-' to pipe from standard input. Without this option, aticonfig will search /etc/X11 for the default configuration file. -o, --output=FILE Select a FILE to output the new configuration file to. Set FILE to '-' to print to standard output. Without this option, aticonfig will replace the input file with the newly generated file. -h, --help Display this help screen. -f, --force Only valid with 'initial' option. Force aticonfig to generate default Monitor, Device, and Screen sections even if the original configuration file has invalid settings in these sections. Composite options: --xv-pixmap-buffer-type=gartcacheable Allocate pixmap buffer from GART cacheable heap. --xv-pixmap-buffer-type=lfb Allocate pixmap buffer from local framebuffer. --xv-pixmap-buffer-type=gartuswc Allocate pixmap buffer from GART USWC heap. PowerXpress options: --px-list-active-gpu --pxl List current activated GPU --px-dgpu Activate discrete GPU (High-Performance mode), must re-start X to take effect --px-igpu Activate integrated GPU (Power-Saving mode), must re-start X to take effect Examples: 1. Setting up fglrx for the first time. Single head : aticonfig --initial --input=/etc/X11/xorg.conf Dual head : aticonfig --initial=dual-head --screen-layout=above This command will generate a dual head configuration file with the second screen located above the first screen. Multi head : aticonfig --initial --heads=4 --adapter=1 This command will generate 4 adjacent X Screens on adapter 1. Use with -f to reduce previously configured heads. 2. Setting up big desktop to horizontal and set overlay on secondary display. aticonfig --dtop=horizontal --overlay-on=1 3. Setting up modes for primary display. aticonfig --resolution=0,1600x1200,1280x1024,1024x768 4. Change tv geometry aticonfig --tv-geometry=85x90+10-10 This will set tv to 85% width (where 100% == overscan) 90% height and shift 10 pixels right of centre and 10 pixels down of centre. 5. Multiple display adapters. List adapters : aticonfig --list-adapters Init 0 and 2 : aticonfig --adapter=0,2 --initial Init all : aticonfig --adapter=all --initial MultiView : aticonfig --xinerama=on 6. ATI Overdrive (TM). List adapters : aticonfig --list-adapters Get Clocks of 0 : aticonfig --adapter=0 --od-getclocks Set new Clocks for 0 : aticonfig --adapter=0 --od-setclocks=770,1126 Test out 3D : atiode -P60 -H localhost:0; echo $? Check Temperature of 0 : aticonfig --adapter=0 --od-gettemperature Commit changes for 0 : aticonfig --adapter=0 --od-commitclocks ***note*** atiode is a stress application you start with a required parameter -P which specifies the test duration and the optional -H parameter to target a specific display to use. For example atiode -P 600 -H localhost:0 would test display 0 for 10 minutes the return code from the application is the test result 0: Test successfully completed. 1: Invalid command-line parameters. 2: Test failed because of rendering errors. 3: Target adapter not found. 4: Test aborted due to unknown reason 7. Framelock/Genlock with GL Sync module Set GL Sync connector parameters for particular adapter: aticonfig --glsync-setconfig=0,0,2,0.0,3,8 --adapter=1 Enable Genlock for particular display: aticonfig --glsync-setgenlock=lvds,1,0 --adapter=1 Enable Timing Master: aticonfig --glsync-setgenlock=dfp3,0,1 --adapter=1 Verify if the frequency is locked for particular display: aticonfig --glsync-getgenlock=crt1 --adapter=1 Set GL Sync output port RJ45_1: aticonfig --glsync-setport=RJ45_1,1,BNC Reinitialize all genlock settings for all displays and adapters: aticonfig --glsync-restart Please report bugs to کد: http://support.ati.com

نقل قول:

نوشته شده توسط Zalamen [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

etc/X11/xorg.conf
من این رو توی ترمینال وارد میکنم یک فایل متنی باز میشه اون متنی که شما نوشتین رو توش بنویسم درست میشه؟
توی این فایل متنی از اول این هست:

کد:

Section "Device" Identifier "Default Device" Option "NoLogo" "True" EndSection

کل فایل xorg.comf شما همین اطلاعات رو داره؟

نقل قول:

نوشته شده توسط key1lou [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

با سلام خدمت دوستان
من دیشب اوبونتو 11.04 رو نصب کردم اما درایو کات گرافیک نمی دونم چرا نصب نمیشه
البته مثل ویندوز انگار درایوش نصب هست

[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

اما توی قسمت apperance اصلا چیزی برای اتخاب حالتهای extra و مدیوم کارت گرافیک نیست

در حین نصب هم چند تا دو تا حالت 1 و 2 داشت

ابتدا دستور زیر رو اجرا کنید ببینید خروجی چه هست

کد:

lspci -nn | grep VGA

و بسته های زیر رو هم چک کنید که نصب باشند:

کد:

fglrx, fglrx-dev, fglrx-amdcccle, jockey-common, jockey-common, jockey-kde, jockey-gtk

و بعد دستور زیر را اجرا کنید برای گرفتن بکآپ از تنظیمات فعلی:

کد:

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup

و بعد دستور زیر را وارد کنید برای تنظیم مجدد xorg :

کد:

sudo dpkg-reconfigure xserver-xorg

و بعد یا سیستم رو ریسارت کنید و یا فقط محیط دسکتاپ رو با زدن دکمه های CTRL+ALT+BACKSPACE

با سلام
ممنون طاها جان امشب چک کنم

نقل قول:

fglrx, fglrx-dev, fglrx-amdcccle, jockey-common, jockey-common, jockey-kde, jockey-gtk

چطور چک کنم ببینم نصب هستند یا نه ؟

اصلا کارت گرافیک الان نصب هست یا نه ؟
دوستان کسی کدکهای پخش mp3 و فیلمها رو در اوبونتو11.04 نداره که اپلود کنه تا بتونم بگیرم ؟ روی اوبونتو اینترنت ندارم
و یا لینک دانلود vlc رو برای اوبونتو 11.04

در مورد سیناپتیک هم سئوالی داشتم ببینید من برای دریافت ادرس پکیج ها به صورت افلاین از سیناپتیک اسم مثلا کدکهای ubuntu restricted رو می زنم اما هیچ ادرسی بهم نمیده

[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

با تشکر

برای جستجوی بسته‌های مورد نیازت یه راه بهتر هم هست
از سرچ این صفحه استفاده کن:

کد:

http://packages.ubuntu.com

من فکر می‌کنم درایور کارت گرافیکت نصب هست
من معمولا با دستورات زیر متوجه می‌شم که درایور نصب هست یا نه:
glxinfo | grep direct
و برای ati:
fglrxinfo

نقل قول:

برای جستجوی بسته‌های مورد نیازت یه راه بهتر هم هست
از سرچ این صفحه استفاده کن:

کد:

http://packages.ubuntu.com

من فکر می‌کنم درایور کارت گرافیکت نصب هست

با سلام و تشکر
ببینید من الان مسیر رو درست اومدم ؟
اینجا چی رو باید دانلود کنم ؟ حجمش که خیلی کمه ؟

این univese چیه که جلوی بعضی ها هست ؟ اینها الان نرم افزار هستن یا بسته یا کدک ؟

[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

نقل قول:

نوشته شده توسط key1lou [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]

با سلام و تشکر
ببینید من الان مسیر رو درست اومدم ؟
اینجا چی رو باید دانلود کنم ؟ حجمش که خیلی کمه ؟

این univese چیه که جلوی بعضی ها هست ؟ اینها الان نرم افزار هستن یا بسته یا کدک ؟

ببین در پایین همون صفحه قسمت Download هست، مثلا برای بسته ی شما باید Download Mplayer-gui باشه، که دو بسته برای معماری 64 و 32 داره، که شما با توجه به سیستمتون یکیش رو انتخاب کن.

اون بسته هایی که می بینی در عکس، اونهایی که قرمز هستند نیاز های بسته هستند، به این معنی که اون بسته ها باید نصب باشند و در واقع بین این بسته و اون بسته ها وابستگی وجود داره! اینجا هست که کار سخت میشه! یعنی شما باید چک کنی که اون بسته ها در سیستم شما موجود باشند و اگر نیست، باید اونها رو هم دانلود کنی :46:

شاید کمی سخت به نظر برسه، البته یک راه دیگر هم هست (البته به شرط اینکه دستور sudo apt-get update اجرا شده باشه تا لیست بسته ها کامل باشه) به فرض شما می خواهید postgrey رو نصب کنید، دستور زیر رو اجرا کنید:

کد:

apt-get --print-uris --yes install postgrey | grep ^\' | cut -d\' -f2 >downloads.list

بنابراین یک لیست مانند زیر تولید خواهد شد:

کد:

http://security.ubuntu.com/ubuntu/pool/universe/libn/libnet-dns-perl/libnet-dns-perl_0.59-1build1.1_i386.deb http://gb.archive.ubuntu.com/ubuntu/pool/universe/libb/libberkeleydb-perl/libberkeleydb-perl_0.31-1_i386.deb http://gb.archive.ubuntu.com/ubuntu/pool/main/libd/libdigest-sha1-perl/libdigest-sha1-perl_2.11-1build1_i386.deb http://gb.archive.ubuntu.com/ubuntu/pool/main/libd/libdigest-hmac-perl-dfsg/libdigest-hmac-perl_1.01-5_all.deb http://gb.archive.ubuntu.com/ubuntu/pool/universe/libi/libio-multiplex-perl/libio-multiplex-perl_1.08-3_all.deb http://gb.archive.ubuntu.com/ubuntu/pool/universe/libn/libnet-cidr-perl/libnet-cidr-perl_0.11-1_all.deb http://gb.archive.ubuntu.com/ubuntu/pool/universe/libn/libnet-ip-perl/libnet-ip-perl_1.25-2_all.deb http://gb.archive.ubuntu.com/ubuntu/pool/universe/libn/libnet-server-perl/libnet-server-perl_0.94-1_all.deb http://gb.archive.ubuntu.com/ubuntu/pool/universe/p/postgrey/postgrey_1.27-4_all.deb

بنابراین این لینک ها رو در جایی ذخیره کنید و سپس در سیستمی که به اینترنت متصل هست، دانلود کنید و بعد اونها رو به فولدر /var/cache/apt/archives انتقال دهید و دستور نصب رو به صورت ساده یعنی sudo apt-get install postgrey اجرا کنید! :46:
کمی زحمت داره ولی خوب زیاد هم سخت نیست :31:

مشکل در نصب اوبونتو 10.10

سلام
من در نصب ubunto desktop editiion به مشکلی برخورد کردم.میخواستم دوال بوت در کنار 7 نصبش کنم و طبق همه ی آموزشهای تصویری موجود جلو رفتم ، پارتیشن بندی رو که انجام دادم داشت نصب میشد که وسطش قطع شد و گفت دیوایس dev/sda5 وجود نداره، یکی دیگه انتخاب کن ولی دیگه روی همون صفحه قفل کرد و کلأ میندوز و همه چیز و داغون کرد. به طوری که دیگه هیچ سیستم عاملی برای بوت شدن وجود نداشت.
7 رو دوباره نصب کردم ..
لطفأ کسی منو راهنمایی کنه که :
1.این مشکل برای چی ایجاد شده؟
2.چکار کنم که تکرار نشه
3.برای داشتن هردو اوبونتو و 7 باید easybcd نصب کنم؟ (کلأ جریان easybcd چیه و اگر اون نباشه درکنار هم نمیتونن بوت بشن؟؟ ) :20:
ممنون میشم کسی راهنمایی کنه

نقل قول:

کل فایل xorg.comf شما همین اطلاعات رو داره؟

آره.......