Printable View
دوست عزیز قبلا گفتم وقتی به راحتی می شه از طریق لن وصل شد چه کاریه؟نقل قول:
من کاری ندارم چی کار می خوای بکنی ولی پشتیبانی نمی شه
یکسری درایور محدود هست بیشتر برای حل مشکل مودمهای فقط usb هست که اونم کلی دردسره
باید خودتون جستجو کنید
از خروجی دستورنقل قول:
usr/sbin/hsfconfig --info/
می تونید متوجه بشید که آیا درایور درست نصب شده یا نه
این اخری رو من متوجه نشدم یعنی باید چی کار کنم
اون دستورو اجرا کن
اگه اصلا نصب شده باشه با hsfconfig خالی هم میشه فهمید.اگه گفت همچین دستوری نیست پس اصلا نصب نشده!نقل قول:
برای اطلاع از اینکه درست نصب شده و یکسری اطلاعات دیگه، همونطور که rootnt گفت، hsfconfig -info رو در ترمینال اجرا کن و خروجیش رو ببین. فکر کنم باید با کاربر ریشه این کارو بکنی.
دوست من
تونستم xp رو با usp وصل کنم به مودم و لینوکس رو با شبکه حالا چه جوری بهش حالی کنم که مثل ویندوز اوتوماتیک ای پی بده
تا به اینتر نت وصل بشه"؟
پیدا کردم تو حالت مانوئلی باید انجام بدینقل قول:
لطفا در نصب مودم کمکم کنید(لپ تاپ Dell Vostro 1500 )
من از Fedora v10 استفاده می کنم
فایل ScanModem
[html]
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27.5-117.fc10.i686
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27.5-117.fc10.i686 (mockbuild@x86-7.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 12:19:59 EST 2008
scanModem update of: 2009_05_12
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 05a9:2640 OmniVision Technologies, Inc.
ID 062a:0001 Creative Labs Notebook Optical Mouse
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1028:0228 Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
21: 100 385 IO-APIC-fasteoi uhci_hcd:usb4, uhci_hcd:usb6, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
PCI: 0000:00:1b.0 reg 10 64bit mmio: [febfc000, febfffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-01: STAC92xx Digital : STAC92xx Digital : playback 1
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebfc000 irq 21
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.27.5-117.fc10.i686/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Vendor Id: 0x14f12c06
Subsystem Id: 0x14f1000f
Revision Id: 0x100000
Modem Function Group: 0x2
The audio card hosts a softmodem chip: 0x14f12c06
14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
Get a hsfmodem package through http://www.linuxant.com
If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1028:0228
IRQ=21
HDA=8086:284b
SOFT=8086:284b.HDA
CHIP=0x14f12c06
CodecClass=14f1
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1028:0228
Softmodem codec or chipset from diagnostics: 0x14f12c06
from Archives:
The HDA card softmodem chip is 0x14f12c06
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.27.5_117.fc10.i686
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on http://www.linuxant.com/alsa-driver/ At the same time download the
alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant
The installation command for a .deb suffic packages is, with root/adm permission:
alsa* -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
There may a message that "Dependencies" are not satisfied. In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at http://packages.ubuntu.com. After download,
they can be coinstalled with:
dpkg -i li*.deb
Again try the alsa-driver-linuxant
There may be a message that the patch must be applied. In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch
See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
wvdialconf /etc/wvdial.conf
Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27.5-117.fc10.i686/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-r-xr-xr-x 1 root root 318632 2008-08-29 02:18 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 virbr0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
================================================== ========
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
[/html]
سلام
اوبنتو مودم دیالاپ softV92 data fox modem نمیشناسه لطفا بهم بگید چطوری تنظیمات اتصال رو انجام بدم بارها گشتم تو مطالب فرومها ولی نمیشه کاریش کرد و تنظیمات اتصال از من پورت فلان میخاد که در دیالاپ معمولی مطرح نیست .
وقتی روی آیکن مربوط به اتصال به اینترنت که در تسک بار قرار داره دابل کلیک میکنم یه پنجره وا میشه که توش دو تا گزینه هست فکر کنم یکی مال شبکه و دیگری واسه دیالاپ مودم است که روی اون کلیک میکنم ودر پنجره ای دیگر ازم پورت اتصال میخاد و به نظر میرسه که غیر فعاله و مودمو نمیسناسه چون هر چی انگولک کردم ...!
این می گه که مودم شما چیپستش کانکسانته و از نوع hsfنقل قول:
لینک راهنمای نصب در صفحه اول همین تاپیک هست
شما اول باید درایورشو نصب کنیدنقل قول:
و این اطلاعاتی که دادید خیلی کمه و نمی شه فهمید که مودمتون از چه نوعیه
پست اول همین تاپیک رو بخونید
فکر کنم این هم به دردتون بخوره از فایل md5sum.txt داخل دی وی دی اوبونتو برداشتم:::::::
کد:
./pool/main/n/nfs-utils/nfs-kernel-server_1.1.2-2ubuntu2.1_i386.deb
cf1ada9824abe3c7b5381f7c1614c97a
مثل اینکه ورژن کرنلم قدیمیه و در سایت
واسه این نسخه نیست!کد:http://www.linuxant.com/drivers/hsf/full/downloads.php
این مشخصات رو گوتی ::::
کد:
D-LINK DFM-562IS 56ANALOG CONNECTION
ITU-TV.92/V.90 Auto Detect
FAX Mode up to 14400bps Transmission Rate
DTMF
Plug and Play
Telephone Answering
Fax on Demand
Peger Notification
Remote message retrival
:::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::::::::::::::::::::::::::::::::::::::: ::::::::::::::::::::::::::::::::
این هم راپورت pci32::::::::
کد:
Craig Hart's PCI+AGP bus sniffer, Version 1.6, freeware made in 1996-2005.
Searching for Devices using CFG Mechanism 1 [OS: Win XP Service Pack 2]
Bus 0 (PCI), Device Number 0, Device Function 0
Vendor 8086h Intel Corporation
Device 2570h 82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface
Command 0106h (Memory Access, BusMaster, System Errors)
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., Received Master Abort, Fast Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Subsystem ID 25701458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is a Memory Address (anywhere in 0-4Gb, Prefetchable) : F0000000h
New Capabilities List Present:
Vendor-Dependant Capability
AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
AGP Mode Enabled : Yes
AGP Speed(s) Supported : 4x 8x, Currently : 8x
FW Transfers Supported : Yes, Enabled : Yes
>4Gb Address Space Supported : No, Enabled : No
Sideband Addressing Supported : Yes, Enabled : Yes
AGP v3.0 Operation Mode Available : Yes, Enabled : Yes
Isosynchronous Transactions Supported : No
Maximum Command Queue Length : 32 bytes, Current Queue Length : 1 byte
Bus 0 (PCI), Device Number 1, Device Function 0
Vendor 8086h Intel Corporation
Device 2571h 82865G/PE/P, 82848P PCI-to-AGP Bridge
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
Revision 02h, Header Type 01h, Bus Latency Timer 40h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus Number 1
Secondary Bus Command 000Ch (ISA mapping, VGA mapping)
Secondary Bus Status 22A0h (Supports 66MHz, Supports Back-To-Back Trans., Received Master Abort, Medium Timing)
Secondary Bus Latency 20h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : F8000000h to F9FFFFFFh
Prefetchable Memory Range Passed to Secondary Bus : E0000000h to EFFFFFFFh
Bus 0 (PCI), Device Number 29, Device Function 0
Vendor 8086h Intel Corporation
Device 24D2h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 24D21458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 0000BC00h
System IRQ 16, INT# A
Bus 0 (PCI), Device Number 29, Device Function 1
Vendor 8086h Intel Corporation
Device 24D4h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 24D21458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 0000B000h
System IRQ 19, INT# B
Bus 0 (PCI), Device Number 29, Device Function 2
Vendor 8086h Intel Corporation
Device 24D7h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 24D21458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 0000B400h
System IRQ 18, INT# C
Bus 0 (PCI), Device Number 29, Device Function 3
Vendor 8086h Intel Corporation
Device 24DEh 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 24D21458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 0000B800h
System IRQ 16, INT# A
Bus 0 (PCI), Device Number 29, Device Function 7
Vendor 8086h Intel Corporation
Device 24DDh 82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 50061458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is a Memory Address (anywhere in 0-4Gb) : FC000000h
System IRQ 23, INT# D
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
3.3v AUX Current required : 375mA
Bus 0 (PCI), Device Number 30, Device Function 0
Vendor 8086h Intel Corporation
Device 244Eh 82801EB/ER Hub Interface to PCI Bridge (ICH5/ICH5R A2/A3 step)
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0080h (Supports Back-To-Back Trans., Fast Timing)
Revision C2h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus Number 2
Secondary Bus Command 0004h (ISA mapping)
Secondary Bus Status 2280h (Supports Back-To-Back Trans., Received Master Abort, Medium Timing)
Secondary Bus Latency 20h
I/O Port Range Passed to Secondary Bus : A000h to AFFFh (16-bit I/O space)
Memory Range Passed to Secondary Bus : FA000000h to FBFFFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
Bus 0 (PCI), Device Number 31, Device Function 0
Vendor 8086h Intel Corporation
Device 24D0h 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Bus 0 (PCI), Device Number 31, Device Function 1
Vendor 8086h Intel Corporation
Device 24DBh 82801EB/ER (ICH5/ICH5R) EIDE Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is at I/O Port 01F0h and IRQ 14
Secondary Channel is at I/O Port 0170h and IRQ 15
Subsystem ID 24D21458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is an I/O Port : 00000000h
Address 1 is an I/O Port : 00000000h
Address 2 is an I/O Port : 00000000h
Address 3 is an I/O Port : 00000000h
Address 4 is an I/O Port : 0000F000h
Address 5 is a Memory Address (anywhere in 0-4Gb) : FEBFFC00h
Bus 0 (PCI), Device Number 31, Device Function 2
Vendor 8086h Intel Corporation
Device 24D1h 82801EB (ICH5) SATA Controller
Command 0005h (I/O Access, BusMaster)
Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is in native mode at Addresses 0 & 1
Secondary Channel is in native mode at Addresses 2 & 3
Subsystem ID 24D11458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is an I/O Port : 0000C000h
Address 1 is an I/O Port : 0000C400h
Address 2 is an I/O Port : 0000C800h
Address 3 is an I/O Port : 0000CC00h
Address 4 is an I/O Port : 0000D000h
System IRQ 18, INT# A
Bus 0 (PCI), Device Number 31, Device Function 3
Vendor 8086h Intel Corporation
Device 24D3h 82801EB/ER (ICH5/ICH5R) SMBus Controller
Command 0001h (I/O Access)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 24D21458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 4 is an I/O Port : 00001400h
System IRQ 5, INT# B
Bus 0 (PCI), Device Number 31, Device Function 5
Vendor 8086h Intel Corporation
Device 24D5h 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID A0021458h SoundMAX Integrated Digital Audio (Guess Only!)
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is an I/O Port : 0000D800h
Address 1 is an I/O Port : 0000DC00h
Address 2 is a Memory Address (anywhere in 0-4Gb) : FC001000h
Address 3 is a Memory Address (anywhere in 0-4Gb) : FC002000h
System IRQ 17, INT# B
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
3.3v AUX Current required : 375mA
Bus 1 (AGP), Device Number 0, Device Function 0
Vendor 10DEh Nvidia Corp
Device 0326h GeForce FX 5500 [NV34.6]
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
Revision A1h, Header Type 00h, Bus Latency Timer F8h
Minimum Bus Grant 05h, Maximum Bus Latency 01h
Self test 00h (Self test not supported)
PCI Class Display, type VGA
Address 0 is a Memory Address (anywhere in 0-4Gb) : F8000000h
Address 1 is a Memory Address (anywhere in 0-4Gb, Prefetchable) : E0000000h
System IRQ 16, INT# A
Expansion ROM of 128Kb decoded by this card (Currently disabled)
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
AGP Mode Enabled : Yes
AGP Speed(s) Supported : 4x 8x, Currently : 8x
FW Transfers Supported : Yes, Enabled : Yes
>4Gb Address Space Supported : No, Enabled : No
Sideband Addressing Supported : Yes, Enabled : Yes
AGP v3.0 Operation Mode Available : Yes, Enabled : Yes
Isosynchronous Transactions Supported : No
Maximum Command Queue Length : 32 bytes, Current Queue Length : 32 bytes
Bus 2 (PCI), Device Number 3, Device Function 0
Vendor 14F1h Conexant Systems
Device 2F00h HSF 56k HSFi Churchill Data/Fax Modem
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 20h
Self test 00h (Self test not supported)
PCI Class Simple Communication, type Other
Subsystem ID 200314F1h Unknown
Subsystem Vendor 14F1h Conexant Systems
Address 0 is a Memory Address (anywhere in 0-4Gb) : FB000000h
Address 1 is an I/O Port : 0000A000h
System IRQ 16, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
3.3v AUX Current required : 0mA (Self powered)
Bus 2 (PCI), Device Number 9, Device Function 0
Vendor 11ABh Marvell Semiconductor (Was: Galileo Technology Ltd)
Device 4320h Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller (Copper)
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
Revision 13h, Header Type 00h, Bus Latency Timer 40h
Minimum Bus Grant 17h, Maximum Bus Latency 1Fh
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Network, type Ethernet
Subsystem ID E0001458h Unknown
Subsystem Vendor 1458h Giga-Byte Technology
Address 0 is a Memory Address (anywhere in 0-4Gb) : FB010000h
Address 1 is an I/O Port : 0000A400h
System IRQ 10, INT# A
Expansion ROM of 128Kb decoded by this card (Currently disabled)
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
Current Power State : D0 (Device operational, no power saving)
Power Data Registers Information:
D0 Power Consumed: 3800mW
D1 Power Consumed: 3800mW
D2 Power Consumed: 3800mW
D3 Power Consumed: 1200mW
D0 Power Dissipated: 3800mW
D1 Power Dissipated: 3800mW
D2 Power Dissipated: 3800mW
D3 Power Dissipated: 1200mW
Vital Product Data Capability
Identifier Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
Part Number Yukon 88E8001
EC Level (Version) Rev. 1.3
Manufacturer ID Marvell
Serial Number AbCdEfG6d2a26
Extended Capability 01h 10h CCh 03h
Checksum/End 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h
Remaining RW Area 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h
End Tag
IRQ Summary: IRQs 5,10,14,15,16,17,18,19,23 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 4 PCI Devices
IRQ 18 is shared by 2 PCI Devices
IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...