یه سر به این جاها بزن شاید چیزی پیدا کردی:نقل قول:
کد:http://forum.ubuntu-ir.org/index.php?topic=724.msg7288#msg7288
کد:http://forum.ubuntu-ir.org
Printable View
یه سر به این جاها بزن شاید چیزی پیدا کردی:نقل قول:
کد:http://forum.ubuntu-ir.org/index.php?topic=724.msg7288#msg7288
کد:http://forum.ubuntu-ir.org
دستت درد نکنه ولی یه نفر دیگه هم مثل من این سوال رو مطرح کرده بود ولی کسی هنوز جواب نداده بود فکر کنم حالا حالاها باید بی خیال لینوکس بشمنقل قول:
این جا ها هم یه سر بزنی بد نیست:نقل قول:
کد:http://wiki.ubuntu-ir.org/UsbAdslModem/Dlink
کد:http://www.binyaz.com/showthread.php?t=158148
من که هر چی دنبال درایوری چیزی برای نصب مودمم گشتم چیزی پیدا نکردم ولی یه چیزهایی تو این سایت پیدا کردم که نوشته بسته به نوع مودمتون باید یه سری کارهایی رو بکنید ولی نمیدونم مودم جز کدومشون میشه؟(مودم من corecess 3112ug هست مدل usb از آسیا تک هم گرفتم)
ADSL Connectionsکد:https://help.ubuntu.com/7.04/internet/C/connect-to-internet.html
All PPPoE and router-style ADSL modems that use an Ethernet connection are supported by Ubuntu, and some USB ADSL modems are supported too.
For a router-style ADSL modem, simply follow the section called “Basic Procedure”
For information on setting up a PPPoE ADSL modem see the section called “PPPoE Modems”.
For information on setting up a USB ADSL modem see the section called “USB ADSL Modems”.
usb adsl modems:
1. Speedtouch modems:
2. Modems using the Analog Devices Inc. eagle-usb I, II or III chipset (such as Sagem Fast 800, Comtrend ct 350 etc.):کد:https://help.ubuntu.com/community/UsbAdslModem/SpeedTouch
کد:https://help.ubuntu.com/community/UsbAdslModem/ueagle-atm
3. Connexant AccessRunner based modems:کد:https://help.ubuntu.com/community/UsbAdslModem/EagleUsb
کد:https://help.ubuntu.com/community/UsbAdslModem/EciAdsl
کد:https://help.ubuntu.com/community/UsbAdslModem/AccessRunner
شما هم یه نگاهی بکنید ببینید می فهمید مودم من جز کدوم دسته هستشکد:https://help.ubuntu.com/community/UsbAdslModem/e-techV2
میشه قوطی مودمتون رو نگاه کنید و اطلاعات کاملتری اینجا بزاریید. نوع چیپ و ......
شرکت سازنده مودمتون فک کنم این باشهو این:کد:http://www.GlobeSpanVirata.com/
کد:http://www.corecess.com/eng/main.asp
کد:http://www.corecess.com/eng/product/xdsl_corecess3100.asp#4
دوست عزیز من دنبال راه حلی برای مشکل شما هستم. اگر راه حلی پیدا کنم همینجا میذارم. یکی از دوستام چند وقت پیش از آسیا تک مودمی گرفته که فکر می کنم مثل همین مودم شما باشه. این دوستم مثل من از kubuntu 7.04 استفاده می کنه و از طریق برنامه KNetworkManager و با یک سری نتظیمات ساده در این برنامه تونست که به اینترنت وصل بشه. تا اونجایی که من میدونم مودم شما نیازی به نصب درایور نداره. شما باید از طریق برنامه Network Manager که در ubuntu وجود داره بتونی به اینترنت وصل بشی.
این راهنما رو هم یه نگاهی بنداز :
کد:http://wiki.ubuntu-ir.org/UsbAdslModem/Dlink
اشتباه کردیدنقل قول:
من که هر چی دنبال درایوری چیزی برای نصب مودمم گشتم چیزی پیدا نکردم ولی یه چیزهایی تو این سایت پیدا کردم که نوشته بسته به نوع مودمتون باید یه سری کارهایی رو بکنید ولی نمیدونم مودم جز کدومشون میشه؟(مودم من corecess 3112ug هست مدل usb از آسیا تک هم گرفتم)
مودم با رابط lan (corecess 3115) قیمتش خیلی فرق نداره
بهتر بود از این می گرفتید
ففکر نکنم بدون درایور کار کنه حتما درایورش باید نصب بشهنقل قول:
تا اونجایی که من می دونم این مودمهای usb مثل مودمهای دایل آپ اینترنال هستند
یک سری از کار هایی که باید انجام بدن (مثلا encapsulation کردن در لایه انتقال) توسط سخت افزار انجام نمی شه و بصورت نرم افزاری توسط همون درایوری که نصب می شه انجام می شه
در هر صورت خوشحال می شم بدونم چطوری می شه
تا انشاالله مشکل خیلی از دوستانی که از مودم usb استفاده می کنند حل بشه
خيلي از دوستان در حال حاضر از مودم corecess 3112ug که به صورت usb هست بهره ميگيند و نمی توانند از آن در لینوکس استفاده کنند. راهنمای نصب این مودم در سایت زیر مطرح شده و در واقع منبع این آموزش لینک زیر هست. من فقط مقداری تمیزکاری بروی این مقاله انجام دادم.
کد:http://forum.ubuntu-ir.org/index.php?topic=2467.msg15438;topicseen#msg15438
توجه مهم :
این روش بروی توریع اوبونتو تست شده و جواب داده است. و به احتمال زیاد بروی توزیع های دیگر مانند SUSE نیز جواب خواهد داد.
مسئولیت درست بودن و جواب دادن این آموزش به بنده هیچ ارتباطی ندارد. با ریسک خود آن را انجام دهید.
مراحل زير را به صورت کامل انجام دهيد
1- با توجه به نوع توزیع خود درایور EciAdsl را از سایت زیر دانلود کنید و آن را نصب کنید.
2- فایل زیر را دانلود کرده و محتویات آن را در مسیر /etc/eciadsl کپی کنید. برای کپی کردن فایل ها به این مسیر نیاز به مجوز root دارید. پس از دستور sudo cp استفاده کنید.کد:http://eciadsl.flashtux.org/download.php
3- در ترمینال این دستور رو اجرا کنید : sudo eciadsl-config-text تا برای شما این نتیجه حاصل شود.کد:http://eciadsl.flashtux.org/download/eciadsl-synch_bin.tar.bz2
4- گزینه ۱ را انتخاب کنید و سپس username , password اکانت ADSL را وارد کنید. بعد لیستی از سرویس های اینترنتی برای شما نمایش داده میشود. در اینجا شما باید عدد ۵۹ را وارد کنید. بعد از این مرحله از شما dns1 , dns2 رو می خواهد فقط اینتر بزنید.کد:saleh@MaadOnline:~$ sudo eciadsl-config-text
Password:
===== Welcome to the EciAdsl Linux driver configuration =====
At any time, press Ctrl+C to quit this script without saving modifications.
Tip: you can run eciadsl-config-text with a .bin file as parameter to change
your .bin quickly.
Your choice:
1) Configure all settings
2) Remove dabusb module
3) Change synch .bin file
Enter your choice (1-3, default is 1):
5- بعد نوبت به وارد کردن VCI ,VPI می باشد که این رو باید از سرویس دهنده اینترنت بپرسید. که قالبا vpi=0 , vci=32 در اسیا تک میباشد.کد:If your provider was not listed (or if you want to overwrite
defaults), you can type in your own DNS servers:
DNS1 currently unset
Type in an IP for DNS1 (press ENTER to skip):
DNS2 currently unset
Type in an IP for DNS2 (press ENTER to skip):
بعد از این مرحله لیستی از مودم ها رو برای شما لیست میکنه که شما باید عدد ۶۸ رو وارد کنید.
سپس از شما مشخصات سخت افزاری مودم رو درخواست می کند که شما باید مقادیر VID1,2=0915 و PID1,2=8102 وارد کنید.
6- بعد از این مرحله از شما مدل چیپ ست رو درخواست میکند که باید گزینه ۳ یعنی GS7470 رو انتخاب کنید.کد:If your modem was not listed (or if you want to overwrite defaults),
you can enter your own VID1/PID1/VID2/PID2 (use eciadsl-probe-device
to get them), Globespan chipset and USB alt interface values:
VID1 currently unset
Type in a VID1 (4-digit hexadecimal): 0915
PID1 currently unset
Type in a PID1 (4-digit hexadecimal): 8102
VID2 currently unset
Type in a VID2 (4-digit hexadecimal): 0915
PID2 currently unset
Type in a PID2 (4-digit hexadecimal): 8102
Select your modem chipset:
1) Previous setting ()
2) GS7070
3) GS7470
Enter your choice (1-3, default is 1):
در دو مرحله بعدی باید عدد صفر را وارد کنید.
7- مرحله بعد مربوط به فایل های Synchronization می باشد که اگر درست مرحله ۲ را انجام داده باشید با لیست زیر مواجه میشید :کد:USB ALT INTERFACE for SYNCH process currently set to
Type in the USB ALT INTERFACE for SYNCH (1-digit decimal (0-5) , press ENTER to keep current value): 0
USB ALT INTERFACE for PPPOECI process currently set to 4
Type in the USB ALT INTERFACE for PPPOECI (1-digit decimal (0-5) , press ENTER to keep current value): 0
عدد 18 را وارد کنید.کد:Select your .bin file for synch:
1) Previous setting (/etc/eciadsl/gs7470_synch18.bin)
2) /etc/eciadsl/gs7470_synch20.bin
3) /etc/eciadsl/gs7470_synch01.bin
4) /etc/eciadsl/gs7470_synch02.bin
5) /etc/eciadsl/gs7470_synch03.bin
6) /etc/eciadsl/gs7470_synch04.bin
7) /etc/eciadsl/gs7470_synch05.bin
8) /etc/eciadsl/gs7470_synch06.bin
9) /etc/eciadsl/gs7470_synch07.bin
10) /etc/eciadsl/gs7470_synch08.bin
11) /etc/eciadsl/gs7470_synch09.bin
12) /etc/eciadsl/gs7470_synch10.bin
13) /etc/eciadsl/gs7470_synch11.bin
14) /etc/eciadsl/gs7470_synch12.bin
15) /etc/eciadsl/gs7470_synch13.bin
16) /etc/eciadsl/gs7470_synch14.bin
17) /etc/eciadsl/gs7470_synch15.bin
18) /etc/eciadsl/gs7470_synch16.bin
19) /etc/eciadsl/gs7470_synch17.bin
20) /etc/eciadsl/gs7470_synch18.bin
21) /etc/eciadsl/gs7470_synch19.bin
22) /etc/eciadsl/gs7470_synch21.bin
Enter your choice (1-22, default is 1):
8- حالا نوبت به انتخاب سیستم سرویس دهنده اینترنت میرسه که باید از لیست زیر گزینه ۴ یعنی LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS رو انتخاب کنید.
از این جا به بعد باید هرچی ازتون پرسید رو اینتر بزنید.کد:Select your PPP mode (use the DEFAULT one if you don't know what this means):
1) Previous setting (LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS)
2) VCM_RFC2364
3) LLC_RFC2364
4) LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS
5) VCM_RFC_1483_BRIDGED_ETH
6) LLC_RFC1483_ROUTED_IP
7) VCM_RFC1483_ROUTED_IP
اگر درست انجام داده باشید باید به این صورت کانفیگ کرده باشید:
کد:==== Configuration will be created with these values :
+ User : 8118280058
+ Password : (hidden)
+ Provider : Other
DNS 1 :
DNS 2 :
+ VPI/VCI : 0915/8102
+ Modem : Other
GS chipset : GS7470
VID1/PID1 : 0915/8102
VID2/PID2 : 0915/8102
ALT SYNCH : 0
ALT PPPOECI : 0
+ .bin file : /etc/eciadsl/gs7470_synch18.bin
+ PPP mode : LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS
+ use DHCP : yes
+ use static IP : yes
9- بعد از تنظیمات حالا نوبت به این میرسد که راه انداز مودم رو اجرا کنید. لازم به ذکر هست که هر وقت وارد سیستم میشوید باید این کار رو انجام دهید.
حال دستور sudo eciadsl-start را در ترمینال وارد کنید تا مودم شما نصب شود. بعد از نصب باید مثل log زیر برای شما نمایش داده شود و چراغ های مودم روشن شود.
اگر خروجی بالا رو داشته باشید و چراغ ها روشن شده باشند مودم به صورت کامل نصب شده و برای تست میتونید از دستور ifconfig ببینید که یک Device به اسم tap0 برای شما ایجاد شده است.کد:saleh@MaadOnline:~$ sudo eciadsl-start
[EciAdsl 1/5] Setting up USB support...
Preliminary USB device filesystem is OK
[EciAdsl 2/5] Uploading firmware...
Process skipped .. no more needed
firmware loaded successfully
[EciAdsl 3/5] Synchronization...
OK eciadsl-synch: success
Synchronization successful
[EciAdsl 4/5] Connecting to provider...
Connection successful
[EciAdsl 5/5] Setting up route table...
Waiting for tap0...
saleh@MaadOnline:~$
10- حال نوبت به تنظیمات pppoeconf می باشد. در خط فرمان دستور sudo pppoeconf tap0 را اجرا کنید و در اینجا هم یوزر و رمز ای دی اس ال خود رو بدید و بقیه رو اینتر بزنید
11 - حال کافیه دستور sudo pon dsl-provider رو در خط فرمان وارد و از اینترنت استفاده کنید.
موفق باشید.
اگه ميشه نحوه استفاده از دستور sudo cp رو هم بگيد چون نتونستم فايلها رو در پوشه مورد نظر كپي كنم
فایلی رو که در مرحله ۲ گرفتی Extract کن . بعد در داخل ترمینال با دستور cd برو به دایرکتوری که شامل فایل ها هست . مثلا :نقل قول:
بعد با دستور زیر همه فایل ها رو کپی کن :کد:cd /media/sda7/eciadsl-synch_bin
کد:sudo cp *.* /etc/eciadsl
دوباره سلام من در نصب مودمم(corecess 3112ug) به یک مشکل برخوردم من تمام مراحلی را که در این پست قبلی گفته قدم به قدم انجام دادم ولی باز connect نشدم ناگفته نماند که هر دو چراغ مودمم روشن شده ولی وقتی دستور sudo eciadsl-start را وارد می کنم این متن می آید
ubuntu@ubuntu:~$ sudo eciadsl-start
[EciAdsl 1/5] Setting up USB support...
Preliminary USB device filesystem is OK
Loading tun/tap module...
tun loaded successfully
[EciAdsl 2/5] Uploading firmware...
Process skipped .. no more needed
firmware loaded successfully
[EciAdsl 3/5] Synchronization...
OK eciadsl-synch: success
Synchronization successful
[EciAdsl 4/5] Connecting to provider...
Connection successful
[EciAdsl 5/5] Setting up route table...
Waiting for tap0...
ERROR: couldn't set your static IP or your external gateway
If you don't use PPPoE, please check your configuration.
ubuntu@ubuntu:~$ sudo pppoeconf tap0
Plugin rp-pppoe.so loaded
----------------------------------------------------
و وقتی این دستور رو می زنم این متن می آید sudo pon dsl-provider
ubuntu@ubuntu:~$ sudo pon dsl-provider
Plugin rp-pppoe.so loaded
---------------------------------------------------------------------
کل دستوراتی رو هم که وارد کردم اینجا گزاشتم
راستی داشت یادم می رفت دستور ifconfig رو هم زدم گفتم شاید به دردتون بخوره خرو جیش رو اینجا می زارمکد:http://docs.google.com/Doc?id=dd9765wc_35czs7f4
ubuntu@ubuntu:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:13:D4:54:8D:A4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
eth0:avah Link encap:Ethernet HWaddr 00:13:D4:54:8D:A4
inet addr:169.254.8.32 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:108 errors:0 dropped:0 overruns:0 frame:0
TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8160 (7.9 KiB) TX bytes:8160 (7.9 KiB)
tap0 Link encap:Ethernet HWaddr 72:24:50:23:D0:F6
inet6 addr: fe80::7024:50ff:fe23:d0f6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:1084 (1.0 KiB)
تا اونجایی که من متوجه شدم , برای اینکه موفق به راه اندازی مودم و کانکت شدن بشید باید در مرحله 7 تمامی گزینه ها رو امتحان کنید تا بهترین حالت را برای مودم خود پیدا کنید.
شما مجددا در خط فرمان دستور sudo eciadsl-config-text رو بزنید و منوی ۳ رو انتخاب کنید ( Change synch .bin file ) . و یکی یکی فایل های gs7470_synchXX.bin رو عوض کنید تا بهترین حالت رو بتونید برای مودمتون انتخاب کنید.
2روز پیش fedora core 6 نصب کردم مودم من هم dlink dsl-302t هست از adsl استفاده میکنم چه جوری میتونم در لینوکس به اینترنت کانکت بشم؟
تا حالا با لینوکس کار نکردم
مودم شما از طریق usb وصل میشه یا پورت Lan ؟؟
هم Usb وهم Lan ولی من از Lan استفاده میکنم
خب از همون پورت lan استفاده کنیدنقل قول:
نوشته شده توسط dj farbod
با دستور ifup eth0 کارت شبکه سیستم فعال میشه
سیستم رو ریبوت کنید
بعد از لاگین کردن دستور ifconfig -a رو اجرا کنید ببینید سیستم ip گرفته یا نه اگر ip رو دریافت کرده موقع کانفیگ مودم هست firefox رو بازکنید توی آدرس بار این ip رو تایپ کنید 192.168.1.1 بقیه کار دیگه معلومه
از طریق پورت lan خیلی راحت می تونید کانکت بشید . تنها کاری که باید بکنید اینه که بعد از وصل کردن مودم به پورت lan و روشن کردن مودم , در تنظیمات مربوط به network , کارت شبکه رو فعال کنید. در فدورا ۶ فکر می کنم باید به این قسمت برید :
کد:System ==> Administration ==> Network
کارت lan شما احتمال زیاد با نام eth0 شناخته شده. اگر از طرف شرکتی که adsl گرفتی تنظیمات خاصی باید وارد کنی ( مانند dns , IP و ... ) با Double click روی eth0 وارد صفحه تنظیمات میشی که در اونجا میتونی تنظیمات پیش فرض رو انجام بدی ( دقیقا مشابه تنظیماتی که در ویندوز انجام میدید ) . در غیر اینصورت باید eth0 رو Activate کنید.
از طریق ترمینال و با دستور pppoeconf هم میتونی کارت شبکه و در نتیجه اینترنت رو فعال کنی. این دستور رو باید به صورت root ( کاربر ریشه ) انجام بدی. قبلش دستور su رو وارد کن و پسورد رو بزن و بعد دستور pppoeconf
----------------------------------------------------------
ببخشید m a j r i x جان . پست شما رو ندیدم.:46:
این کارارو کردم مودمو میشناسه ولی نمیدونم کانکشنش کجاست
pppoeconf
su رو میزنم بعد هم پسورد میدم وارد root میشه ولی وقتی pppoeconf رو میزنم command not found میده
این فایل رو نصب کن , بعد دستور pppoeconf یا اگه نشد دستور pppoe رو اجرا کن.نقل قول:
کد:ftp://ftp.univie.ac.at/systems/linux/fedora/core/6/i386/os/Fedora/RPMS/rp-pppoe-3.5-32.1.i386.rpm
اون رو میگه قبلا نصب شده
pppoeconf وpppoe را هم command not foun میده
چه کار کنم؟؟؟؟؟؟
جوابتون رو دادن دیگه
باید ppp و rp-pppoe رو نصب کنید و بعد این دستورات رو اجرا کنید
دوستان من هم میخوام مودم رو نصب کنم ونیاز به راهنمایی دارم.
اول از همه این ورژن لینوکس فدورا 7 من است.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
بعداینم از عکسی از pci32 درباره نوع مودم.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
من هر چی تو این لینک گشتم فایل مربوط به این نسخه کرنل رو نیافتم.
من از طریق برنامه Network Configuration مودم رو تعریف کردم ولی در مرحلهکد:http://www.linuxant.com/drivers/hsf/full/downloads.php
اکتیو شدن این ارور رو میده.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
این ارور رو هم در بین مراحل نصب میده.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
دیدن این عکس هم بد نیست.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
اینم خود برنامه بعد از مراحل نصب.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
سلام
چرا شما کرنل xen رو نصب کردید؟ برای نصب مشکل برمیخورید از smp یا default استفاده کنید
یعنی درایور رو نصب کردی؟؟؟ کدوم درایورنقل قول:
اینم خود برنامه بعد از مراحل نصب.
اول اینکه مودم شما اصلا conexant نیست و اینتله
دوم اینکه شما با کرنل xen اومدی
درایور مودمتونو از سایت اینتل دریافت و نصب کنید intel 536ep
در موردش قبلا بحث شده بگردید پیدا می کنید
برای دانلود درایور برید اینجا و مراحل دانلود رو طی کنید:
کد:http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=977
من خیلی وارد نیستم نمیدونم چه فرقی میکنن .
یا چطور به این دو یعنی smp یا default تغییرش بدم.
تنها فرقی که با دفعات قبل نصبم کرده اینهکه گذاشتم خودش خودکار پارتیشنبندی کنه .
خوب منتظرم راهنمایی کنید.
راستی اولش در صفحه اول لودر سه گذینه هست
اولیش همین مدل بالایی
دومش فکر کنم base default باشه
سومیش هم other
پس یعنی بادومی کار کنم.
دوستان ممکنه یک نگاه به این صفحه بنذازید.
بگید کدوم رو من باید داتلود کنمکد:http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=977&OSFullName=Linux*&lang=eng&strOSs=39&submit=Go%21
اخه فقط تا فدورا3 داره باهمون درایور فدورا 3 کار میکنه .
بعدش هم من اینو پیدا کردم:
نصب انواع مودم ها :
در اينجا نصب چند نوع مودم را براي مثال ذكر ميكنم :
براي نصب مودم Intel 536ep :
روي نسخه هاي مختلف لينوکس مثل زوزه،ردهت،ردفلگ و مندريک به آدرسي زير مراجعه کنيد:
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
فايل فشرده رو که باز کنيد مي تونيد راهنماي نصب رو هم توش پيدا کنيد.
مثلا براي نصب روي ردهت:
كد:
make clean
make 536ep
make install
چند تا سئوال دارم اول اینکه وقتی فایل رو از حالت فشرده خارج کردم در کجا کپی کنم بعد اینکه
این سه دستور رو جلوی # ریشه تایپ کنم کافیه ونصب میشه.
سلام به همه آقا ! ( و همچنین خانوم ! ) من یوبونتو ( اوبونتوی سابق ! ) رو نصبیده ام ولی تو کف این مودم مونده ام ! اصلا حیف نبود بیام لینوکس ؟ ویندوز تنها مشکلش آپتودیت کردن آنتی ویروسه اما این لینوکس اصلا وصل نمی شه !!! خواهشا آدرس هم می دید ، سر راست باشه ! نگید سر چهارراه دست چپ ! بفرمایید : www دات فلان . فلان دکمه رو پرس می کنی و فلان ! اینطوری ! سه روزه مغز من از بس sudo کرده ، سوسک شده اصلا ! این که همون ام اس داس خودمونه ! برنامه هم که هیچی به هیچی ! من فقط واسه این لینوکس رو نصبیده ام که آنتی ویروس نمی خواد . با این حساب ، 545423164934 رحمت به ویندوز ! البته خیلی ها هم مثل من ، فقط به خاطر آنتی ویروس علاقه مند به لینوکس هستند و به خاطر همین مودم ، متنفر ! کسی همت کنه و یک راهنمایی عمومی تو این وبسایت بذاره بد نیست . من به این سایت ها هم سر زده ام و چیزی گیرم نیومده : technotax linuxshopکد:http://linmodems.org/
ubuntu و خلاصه n هزار سایت دیگه ! اگه مودم حل بشه ، قطعا 4 تا دوست دیگه ام هم لینوکس می شن ! خیلی ممنون از همه و امیدوارم از سبک نگارشی من ، حالتون بهم نخورده باشه . ولی واقعا اعصاب آدم داغونه . هیچ کس تو دور و بری هاش لینوکسی نیستند و نمی شه از کسی پرسید . به هر حال متشکرم . راستی یادم رفت بگم مودم من اینه : D-Link DFM 562IS ممنونکد:http://www.ubuntu-ir.org/
خوب علی جان شما اول مشکل کرنلت رو حل کن
کرنل درست رو از روی cd فدورا نصب کن
به نظر من شماره ۸ رو دانلود کن (بسته کامپایل نشده)
بعد هرجا که دوست داری اکسترکت کن مثلا usr/src/
و بعد داخل بسته فایل readme رو بخون - راهنماییت می کنه که چطوری نصبش کنی
منوچ جان شما هم به جای این حرفا مشخصات کامل مودمت رو بده تا ببینیم چی می شه
لطفا تاپیک بیهوده هم نزن ;)
اگر منظورتون اینه دارم میگیرمش.
8. Modem Chipset Driver (Uncompiled) - [INTEL-536EP-4.69.TGZ] (452KB) 4.69 7/19/2004 Download
Contains the base, partial open source, UNCOMPILED Intel® 536EP V.92 modem (PCI) chipset driver.
خوب اما مشکل این کرنل چیه و چرا این نصب شده و
چطور عوضش کنم ایا باید کامل یکبار دیگه نصب رو انجام بدم
ودر کدوم مرحله نصب اشتباه کردم که این کرنل نصب شده.
الان (توی فدورا ۷) هم کرنلتون همونه؟
موقع نصب و هنگام انتخاب بسته ها باید کرنل مناسب رو انتخاب کنید
الان هم با برنامه مدیریت بسته هاتون از روی cd نسخه درست کرنل رو نصب کنید
---------------------------------------
یا rpm درستشو از توی cd با دستور rpm -i در خط فرمان نصبش کنید
بعد از اینکه نصب کردید تا اونجا که یادمه این کرنلهای کامپایل شده همه کار رو خودشون انجام می دهند حتی تنظیم گراب
به همین دلیل شما راحت سیستمتو ریست می کنی و بعد باید کرنل جدید در لیست بوت شما دیده بشه و با اون وارد لینوکس بشید
حالا ببینم خودت چی کار می کنی
فکر کنم بااین دیگه مشکل حله حالا دوتا کرنل دارم.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
این عکسو نگاه کن من فایل رو دانلود کردم و از حالت فشرده خارج کردم سپس توی مسیر فوق کپی کردم.
/usr/src
حالا فرمانهای فوق اجرا نمیشه عکس روببین
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
این هم readme داخلش :
rootnt عزیز یک نگاه به این نوشتهها هم بنذار که ایا به این لینوکس میخوره.
خودم بعدش اضافاتشو پاک میکنم.
ReadMe file for the
Intel(R) 536ep V9x DF modem Linux driver
contents:
1. License
2. Release Notes
3. Installation/Uninstallation
4. File Descriptions
5. International Users
6. Beta Tester appreciation
7. Security issues
8. Compilation issues
a. Instructions for Debian Users
b. Kernel Source
9. What is the Hamregistry?
10. what's v92 and v44?
11. The Hamregistry tool (for persistance)
12. Known Bugs/Issues
13. Comments, ideas, problems, fixes
-------------------------------------------------------------------------------
1. LICENSE
IMPORTANT - read the file "LICENSE.txt" for the INTEL SOFTWARE LICENSE
AGREEMENT BEFORE COPYING, INSTALLING OR USING.
-------------------------------------------------------------------------------
2. Release Notes
This release is not compatible with kernels prior to 2.4.
This release supports 2.4.x and 2.6.x kernels. It is not compatible to 2.2.x kernels.
The softmodem binary was compiled with gcc version 3.2
v92 support added: modem on hold AT command set,
PCM upstream, v44, and quick connect are implemented.
Linux Compatability tests are performed on the latest or previous
versions of the following distributions: Mandrake, RedHat, and SuSE
-------------------------------------------------------------------------------
3. INSTALLATION
Prerequisites:
1. root access
2. bash shell to run install scripts
3. an Intel536ep modem
4. KERNEL SOURCE HEADERS FOR THE KERNEL YOU ARE RUNNING.
(found on your distribution's CD)
6 steps to install
1. login as ROOT
2. extract the archive into a directory with "tar -zxvf <archivename>.tgz"
3. cd into the directory it created.
4. Type: make clean
5. Type: make 536
6. Type: make install
This will create a /dev/modem device file. This file is used as an interface to
modem by all applications: minicom, kpppd, efax, etc. Please configure the applications
to use /dev/modem if neccessary.
The installation script has been designed for the following distributions
release versions
mandrake-release
SuSE-release
redhat-release
debian_version (including Corel)
slackware-version
conectiva-version
bluepoint-release
redflag-release
Unknown distributions install modules and utilities but
will not install boot scripts!.
Please examine the Intel536_inst and Intel536_boot scripts if you have a different distribution.
The driver registers itself as character device
major number 240, minor number 1.
ATTENTION: if the driver compiles but the script just wont work for you.
Here are the bare minimum steps to get your modem to work.
0. log in as root.
1. insmod -f Intel536.o (Intel536.ko for kernel 2.6)
2. you can start "hamregistry &" at this point if you wish.
3. rm /dev/536ep
4. mknod /dev/536ep c 240 1 (note "240" is the default, if it does not
work see what /proc/devices says 536ep's major number is)
5. ln -s /dev/536ep /dev/modem
6. start a comm application like minicom and use the modem.
7. see section 3 (International Users) for info on setting the correct
country settings.
Uninstallation.
Linux modem driver is started by the boot script Intel536_boot. The script location
is distribution specific, usually /etc/init.d. So to uninstall the modem, delete
this file, and stop the modules using command: rmmod Intel537
make uninstall does this for redhat.
-------------------------------------------------------------------------------
4. FILE DESCRIPTIONS
Intel536_inst installation script to install 536 modules and supporting files
files copied to /lib/modules/(kernel-version)/misc
Intel536.o (Intel536.ko) modem driver
files copied to /etc/rc.d/... (path differes per distribution)
Intel536_ boot scrip to start and stop driver module
files copied to /usr/sbin
hamregistry hamregistry is the "registry" like tool that the modem uses to
get and store persistant data such as county info and profile strings.
files copied to /etc
hamregistry.bin file that stores the initial persistant data for modem.
-------------------------------------------------------------------------------
5. INTERNATIONAL USERS
hamregistry will store the last country setting you
set in the modem.
in minicom (or equivalent comm application)
the commmand to change country setting is "AT+GCI="
the command takes a t.35 country code in hexadecimal.
below is a list of currently supported t.35 country codes.
you can also put this "AT" command in the init string of
the comm application you are using.
if you are a CTR-21 country I think you should be able to
choose a CTR-21 country on the list and be ok. but
that's no guarantee.
The same goes for countries that are "USA" compatable.
(this table also exist in the source file wwh_dflt.c that
ships with the Intel536ep driver)
country code t.35 code
---------------------------
USA 1 B5
KOR 82 61
ECU 593 35
BOL 591 14
CHL 56 15
COL 57 27
PAN 507 85
PER 51 88
SAU 966 98
THA 66 A9
VNM 84 BC
SWE 46 A5
DNK 45 31
FIN 358 3C
NOR 47 82
ISL 354 52
IRL 353 57
ISR 972 58
LIE 423 68
ESP 34 A0
TUR 90 AE
DEU 49 42
AUT 43 0A
CHE 41 A6
CYP 357 2D
GRC 30 46
ITA 39 59
LUX 352 69
NLD 31 7B
GBR 44 B4
BEL 32 0F
FRA 33 3D
PRT 351 8B
PAK 92 84
JPN 81 00
RUS 7 B8
AUS 61 09
MYS 60 6C
CHN 86 26
HKG 852 50
SGP 65 9C
NZL 64 7E
ARG 54 07
BRA 55 16
MEX 52 73
TWN 886 E3
IND 91 53
PHL 63 89
IDN 62 54
BHS 103 0B
BRB 104 0E
BMU 105 12
GTM 502 49
HTI 509 4E
HND 504 4F
JAM 1 5B
NIC 505 7F
PRY 595 87
PRI 121 8C
SUR 597 A3
TTO 117 AC
URY 598 B7
VEN 58 BB
ZWE 263 C4
GUY 592 4D
EST 372 E0
HUN 36 51
SVN 386 E2
ARE 971 B3
SVK 421 2E
CAN 107 14
CRI 506 1B
DOM 110 33
SLV 503 37
GMB 220 41
GIB 350 45
POL 48 8A
EGY 20 36
CZE 420 2E
ZAF 27 9F
GUF 594 E1
-------------------------------------------------------------------------------
6. Thanks to the following beta testers for their valuable input and
suggestions during the HaM 333 beta test between January 2 - 26, 2001
and those who submitted bug reports for Intel 536 driver
Dorian S. Araneda
Sean Walbran
Rob Clark
Marvin Stodolsky
Dominique Duval
Roman Krais
Ulrich Guenther
Marcelino Viana Pinheiro
Thomas S. Iversen
Jospeh Teichman
Michel Bartolone (MED)
Ramon Gonzalez Montoiro
Ryoji Kawagishi
Torsten Vogel
"jandro"
Ian Carr-de Avelon
Helga Weindl
Ed Casas
Bernhard Hoelcker
Alexander "Sasha" Voytov
Albert Woo
Andrey Vitsenko
Peter Hirschmann
Tom Lane
and all of the helpful Linux HaM and 536 modem users
around the world and at-------------------------------------------------------------------------------کد:www.linmodems.org
7. Security issues
the Intel536_inst and Intel536_boot file install the files and device nodes as
root for the owner and group.
this will cause problems for those who want to user the modem to dialout
using an account other than root.
In SuSE, "dialout" is the group used to install the files and device node.
This way, anyone belonging to the "dialout" group can use the modem to dialout.
(take a look at /etc/group)
I did not want the script to allow full access of the modem to everyone without
"root" knowing.
Edit the Intel536_boot and Intel536_inst scripts to fit your needs.
-------------------------------------------------------------------------------
8. Compile issues
a. this driver will now compile with the this path:
/lib/modules/<kernel version>/build/include
the 2.4.4+ kernels says to copy the /boot/vmlinuz.version.h
over to the kernel build path. I have the makefile do this
if this file exists. You must install the kernel source
code anyways. It should be on your distribution's CD.
-------------------------------------------------------------------------------
9. What is the Hamregistry?
The hamregistery is an application that stores data for the 536ep driver onto
the disk. hamregistry stores information from the driver that needs to
persist from reboot to reboot such as you current country setting.
The Intel536_inst install script and the Intel536_boot script start this utility
automatically for you.
If this tool is not present when the driver gets used your profile,
quickconnect, and current country setting will not be saved but the driver
should still work fine. The only step that would need to be done is to
make sure that the driver is set to the correct country with
at+gci= (see section 5)
-------------------------------------------------------------------------------
10. What's v92 and v44?
a. modem on hold: (ISP and your ISP dialer must also support this)
This will allow you to pause your ppp connection to answer an incoming
call. You will need call waiting, dialer, and ISP support for this to
work. When you are done with the call you can resume your ppp connection
without having to reconnect. The AT command set for this feature exist
in the driver.
b, pcm upstream:
(ISP must also support this, as of version 4.32 I
dont know any ISP's that do)
This will allow faster upload speeds.
to enable: at+pig=0
to disable: at+pig=1
c. quickconnect:
Once you make a call to a v92 modem, your phoneline characteristics are
stored. Whenever you make a new v92 connection it will use this data
to make the call negotiation quicker (approx 10 seconds).
to enable: at+pqc=0 at+pss=0
to disable: at+pss=2
d. v44: (ISP must also support this)
A better compression protocol than v42 which can give you better transfer
speeds.
-------------------------------------------------------------------------------
11. The Hamregistry tool
The hamregistry tool is used to provide persistance of settings across
reboots. The haminst and hamboot scripts automatically setup and start
the hamregistry background task for the modem to use.
The hamregistry tool has command line arguments for those who wish to
customize persistant settings. To use these command lines
you must first stop the driver with "bash hamboot stop".
Once the driver has been stopped you may run hamregistry with one of these
arguments to store into the /etc/hamregistry.bin persistance file:
(supply value for items in < >)
-mfg <Modem manufactures name>
-mod <Modem model name>
-hookflash <0,1,2>
hookflash method: 0=(default)without tone 1=with tone 2=reserved
-v92rptopt <0,1>
control v92 reporting: 0=PCM upsteam only 1=(default) all v92
-gpio_lpohd <0,1>
Handset Hook detection: 0=not supported 1=(default)supported
-current_country <t.35 code>
This info is written to the /etc/hamregistry.bin file.
If hamregistry.bin exists along with the installation files, haminst will
copy it to /etc/hamregistry.bin when installing the modem.
-------------------------------------------------------------------------------
12. Known Bugs/Issues
a. Be aware that the build replaces your
/lib/module/<kernver>//build/include/linux/version.h file with
/boot/vmlinuz.version.h
(this is what Linus T. told me to do with a compiler error)
b. There may be an incompatibility with DevFS. The 536ep device may be located
in /dev/tts/536ep
instead of /dev/536ep. Be aware of this and link /dev/modem to the 536ep
device that corresponds to your setup.
c. Currently there is a problem with driver and SuSE 7.2 ppp
connections. I have been able to get ppp connection with bellsouth
by calling this bash script and wvdial config section:
------my script----------------------
#! /bin/sh
/usr/sbin/pppd -detach lock asyncmap 00000000 \
defaultroute debug /dev/modem 115200 \
ipparam ppp0 linkname ppp0 \
noauth \
connect "/usr/bin/wvdial --chat bellsouth"
------my /etc/wvdial.conf section ---
[Dialer bellsouth]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Inti2 = ATQ0 V1 E1 S0=0 &C1 &D2
Dial Command = ATDT
Phone = 9777888
Username = myloginname
Password = mysecretpassword
#Ask Password = 1
Stupid Mode = 0
------------------
wvdial.conf can be created automatically:
wvdialconf wvtest.txt
Found a modem on /dev/537, using link /dev/modem in config.
Modem configuration written to wvtest.txt.
--------
Edit wvtest.txt as indicated. If your country is not the Unites States,
the Init lines should be
Init1 = ATZ
Init2 = AT+GCI=< your hexadecimnmal country code >
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Then:
cp wvtest.txt /etc/wvdial.conf, which will later direct the dialout.
First check COMM status with:
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:D0:59:36:60:A2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:212 errors:0 dropped:0 overruns:0 frame:0
TX packets:212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11316 (11.0 KiB) TX bytes:11316 (11.0 KiB)
The loopback "lo" is standard. But any extra COMM mode such as eth0
should be shut down if it will interfere with domain name services (DNS)
ifconfig eth0 down
will suffice more most systems. Check with:
ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:212 errors:0 dropped:0 overruns:0 frame:0
TX packets:212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11316 (11.0 KiB) TX bytes:11316 (11.0 KiB)
Then dialout with
wvdial &
# wvdial
--> WvDial: Internet dialer version 1.54
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT9777888
--> Waiting for carrier.
ATDT9777888
CONNECT 53333 V44
--> Carrier detected. Waiting for prompt.
** dialup12.rol.ru Terminal Server **
Login:
--> Looks like a login prompt.
--> Sending: internet
internet
Password:
--> Looks like a password prompt.
--> Sending: (password)
Entering PPP Session.
IP address is 66.44.1.90
MTU is 1006.
--> Looks like a welcome message.
--> Starting pppd at Sun Apr 4 23:11:49 2004
--> pid of pppd: 4879
--> Using interface ppp0
ROM checksum self-test: passed (0xdbd8681d).
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
pppd 2.4.2 started by root, uid 0
Using interface ppp0
Connect: ppp0 <--> /dev/ttyLT0
kernel does not support PPP filtering
--> local IP address 68.14.26.80
--> remote IP address 207.116.5.132
--> primary DNS address 207.116.4.8
--> secondary DNS address 207.116.4.9
PPP BSD Compression module registered
PPP Deflate Compression module registered
local IP address 68.14.26.80
remote IP address 207.116.5.132
primary DNS address 207.116.4.8
The DNS address gets copied to /etc/resolv.conf
wherefrom it consulted to find NAME SERVERS which translate Named addresses into
the Numerical addresses used by the Internet system. Display with
cat /etc/resolv.conf
search
nameserver 207.116.4.8
nameserver 207.116.4.9
Test navigation capability with a known Internet address.
For example the numeric address of novell.com is 130.57.4.70
# ping 130.57.4.70
PING 130.57.4.70 (130.57.4.70): 56 data bytes
64 bytes from 130.57.4.70: icmp_seq=0 ttl=50 time=208.0 ms
64 bytes from 130.57.4.70: icmp_seq=1 ttl=50 time=209.9 ms
64 bytes from 130.57.4.70: icmp_seq=2 ttl=50 time=210.0 ms
shows that your System is attached to the internet, while using the named address
ping novell.com
PING novell.com (130.57.4.70): 56 data bytes
64 bytes from 130.57.4.70: icmp_seq=0 ttl=50 time=204.4 ms
64 bytes from 130.57.4.70: icmp_seq=1 ttl=50 time=210.0 ms
64 bytes from 130.57.4.70: icmp_seq=2 ttl=50 time=210.0 ms
64 bytes from 130.57.4.70: icmp_seq=3 ttl=50 time=210.0 ms
shows that DNS services are OK. ALWAYS quickly abort a "ping" test with
Ctrl -C
This COMM session was started with
wvdial &
where the "&" puts wvdial in the background and allows command prompt recovery
To stop this session I will fore ground (fg)
fg wvdial and then stop wvdial with
Ctrl-C
-------------------------------------------------------------------------------
13. Comments, ideas, problems, fixes? please contact:
Linux Voice Band Modems (VBM) of Intel Residential Access Division (RAD)
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
To restrict email volume, please email only development related issues that areکد:http://developer.intel.com/design/modems/
needed to fix a bug or improve the driver. General questions on how to use the
Linux OS may not be responed to.
Other resources and information on Linux controllerless modems can be found on
these useful sites
andکد:http://www.linmodems.org
If you have problems please read Jacques' PostInstall.html FIRST atکد:http://linmodems.technion.ac.il
before sending a message to [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]کد:http://linmodems.technion.ac.il/
بله برای همه لینوکسها هست
اول از همه شما باید بسته kernel-source یا kernel-headers رو نصب کنید (با توجه به ورژن کرنلی که الان روی سیستمتون نصبه)نقل قول:
Prerequisites:
1. root access
2. bash shell to run install scripts
3. an Intel536ep modem
4. KERNEL SOURCE HEADERS FOR THE KERNEL YOU ARE RUNNING.
(found on your distribution's CD)
این راهنما رو کامل و به دقت بخونید و به دقت هم عمل کنید
همین اولش بی دقتی کردید
اینو انجام ندادید:
3. cd into the directory it created
دوست عزیز روی این درایور ها نمی شه ۱۰۰٪ حساب کرد و خیلی باهاش مشکل دارن
لطفا دقت کن
من این نوشته رودیدم ولی نفهمیدم چی مگه .
حالا که بیشتر دقت میکنم فکر کنم cd توزیع لینوکس رومیخواد درسته .
امتحان میکنیم.
بازم ممنونم.
منظور ش اینه که با دستور cd وارد دایرکتوری برنامه ای که از حالت زیپ خارجش کردی بشی
cd /usr/src/package-name
ظاهرا سوتی بدی دادم .
خب من انگلیسیم خیلی ضعیفه.
به هر حال به مسیر فوق رفتم و دستورات رو اجرا کردم ولی بازم
این ارور رو داد.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
حالا چکارش کنم .
این قسمت چی میگه.
distributions
release versions
mandrake-release
SuSE-release
redhat-release
debian_version (including Corel)
slackware-version
conectiva-version
bluepoint-release
redflag-release
Unknown distributions install modules and utilities but
will not install boot scripts!.
Please examine the Intel536_inst and Intel536_boot scripts if you have a different distribution.
The driver registers itself as character device
major number 240, minor number 1.
ATTENTION: if the driver compiles but the script just wont work for you.
Here are the bare minimum steps to get your modem to work.
0. log in as root.
1. insmod -f Intel536.o (Intel536.ko for kernel 2.6)
2. you can start "hamregistry &" at this point if you wish.
3. rm /dev/536ep
4. mknod /dev/536ep c 240 1 (note "240" is the default, if it does not
work see what /proc/devices says 536ep's major number is)
5. ln -s /dev/536ep /dev/modem
6. start a comm application like minicom and use the modem.
7. see section 3 (International Users) for info on setting the correct
country settings.
همون کاری رو که گفتم انجام ندادی
کرنل سورس رو نصب کنید بعد این کارها رو دوباره انجام بدید
قديم امروز, 02:52 PM #741 manuch عضو جدید تاريخ عضويت: Sep 2007 پست ها: 13 فرستادن پيغام از طريق Yahooبه manuch پيش فرض کمک سلام به همه آقا ! ( و همچنین خانوم ! ) من یوبونتو ( اوبونتوی سابق ! ) رو نصبیده ام ولی تو کف این مودم مونده ام ! اصلا حیف نبود بیام لینوکس ؟ ویندوز تنها مشکلش آپتودیت کردن آنتی ویروسه اما این لینوکس اصلا وصل نمی شه !!! خواهشا آدرس هم می دید ، سر راست باشه ! نگید سر چهارراه دست چپ ! بفرمایید : www دات فلان . فلان دکمه رو پرس می کنی و فلان ! اینطوری ! سه روزه مغز من از بس sudo کرده ، سوسک شده اصلا ! این که همون ام اس داس خودمونه ! برنامه هم که هیچی به هیچی ! من فقط واسه این لینوکس رو نصبیده ام که آنتی ویروس نمی خواد . با این حساب ، 545423164934 رحمت به ویندوز ! البته خیلی ها هم مثل من ، فقط به خاطر آنتی ویروس علاقه مند به لینوکس هستند و به خاطر همین مودم ، متنفر ! کسی همت کنه و یک راهنمایی عمومی تو این وبسایت بذاره بد نیست . من به این سایت ها هم سر زده ام و چیزی گیرم نیومده : technotax linuxshop کد: کد:کد: کد:کد:http://linmodems.org/
ubuntu و خلاصه n هزار سایت دیگه ! اگه مودم حل بشه ، قطعا 4 تا دوست دیگه ام هم لینوکس می شن ! خیلی ممنون از همه و امیدوارم از سبک نگارشی من ، حالتون بهم نخورده باشه . ولی واقعا اعصاب آدم داغونه . هیچ کس تو دور و بری هاش لینوکسی نیستند و نمی شه از کسی پرسید . به هر حال متشکرم . راستی یادم رفت بگم مودم من اینه : D-Link DFM 562IS ممنون __________________کد:http://www.ubuntu-ir.org/
rootnt عزیز چطور کرنل سورس رو نصب کنم.
rpm manenger موقع اجرا ارور زیر رو میده.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
این فایل رو تو سیدی پیدا کردمkernel-headers-2.6.21-1.3194.fc7.i386.rpm
دارم میرم امتحان کنم.
عزیزان عزیز ! الهی قربونتون برم ! من تو تهران هستم . یکی شماره تلفن ثابت اش رو به من sms بزنه تا من در اولین فرصت باهاش تماس بگیرم و من رو راهنمایی کنه چطوری تو اوبونتو مودم اینترنال خودم رو نصب کنم ؟ به خدا من فقط واسه اینکه اینترنت ایمن داشته باشم اومدم تو لینوکس و اوبونتو رو خوشم اومد . حالا چیکار کنم ؟ لینوکس بهتر کسی سراغ داره ؟ لطفا یک sms بزنید و شماره خودتونو بدید . این هم شماره موبایل من : 09124350197 منتظرم یا اینکه یک راه حلی پیش پای من بذارید . آخه من چه گناهی کردم تو این دنیا اومدم ؟ دست خودم که نبود !