خطاهای بالای 800مربوط به مشکلات سخت افزاری

این هم لیست خطاهای بالای 800 مربوط به مشکلات سخت افزاری مودم
900

The router is not running.
901 The interface is already connected.
902 The specified protocol identifier is not known to the router.
903 The Demand-dial Interface Manager is not running.
904 An interface with this name is already registered with the router.
905 An interface with this name is not registered with the router.
906 The interface is not connected.
907 The specified protocol is stopping.
908 The interface is connected and hence cannot be deleted.
909 The interface credentials have not been set.
910 This interface is already in the process of connecting.
911 An update of routing information on this interface is already in progress.
912 The interface configuration in invalid. There is already another interface that is connected to the same interface on the remote router.
913 A Remote Access Client attempted to connect over a port that was reserved for Routers only.
914 A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.
915 The client interface with this name already exists and is currently connected.
916 The interface is in a disabled state.
917 The authentication protocol was rejected by the remote peer.
918 There are no authentication protocols available for use.
919 The remote computer refused to be authenticated using the configured authentication protocol. The line has been disconnected.
920 The remote account does not have Remote Access permission.
921 The remote account has expired.
922 The remote account is disabled.
923 The remote account is not permitted to logon at this time of day.
924 Access was denied to the remote peer because username and/or password is invalid on the domain.
925 There are no routing enabled ports available for use by this demand dial interface.
926 The port has been disconnected due to inactivity.
927 The interface is not reachable at this time.
928 The Demand Dial service is in a paused state.
929 The interface has been disconnected by the administrator.
930 The authentication server did not respond to authentication requests in a timely fashion.
931 The maximum number of ports allowed for use in the multilinked connection has been reached.
932 The connection time limit for the user has been reached.
933 The maximum limit on the number of LAN interfaces supported has been reached.
934 The maximum limit on the number of Demand Dial interfaces supported has been reached.
935 The maximum limit on the number of Remote Access clients supported has been reached.
936 The port has been disconnected due to the BAP policy.
937 Because another connection of your type is in use, the incoming connection cannot accept your connection request.
938 No RADIUS servers were located on the network.
939 An invalid response was received from the RADIUS authentication server. Make sure that the case sensitive secret password for the RADIUS server is set correctly.
940 You do not have permission to connect at this time.
941 You do not have permission to connect using the current device type.
942 You do not have permission to connect using the selected authentication protocol.
943 BAP is required for this user.
944 The interface is not allowed to connect at this time.
945 The saved router configuration is incompatible with the current router.
946 Remote Access has detected older format user accounts that will not be migrated automatically. To migrate these manually, run XXXX.
948 The transport is already installed with the router.
949 Received invalid signature length in packet from RADIUS server.
950 Received invalid signature in packet from RADIUS server.
951 Did not receive signature along with EAP Message from RADIUS server.
952 Received packet with invalid length or Id from RADIUS server.
953 Received packet with attribute with invalid length from RADIUS server.
954 Received invalid packet from RADIUS server.
با تشکر از کاربران محترم :20: