کمک در مورد یک ارور سایت asp .net
سلام دوستان من یه سایت طراحی کردم که این ارور کانفیگ رو میده میشه بگین دلیلش چیه ؟
[PHP]Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'ActiveReports.Web, Version=5.2.3.669, Culture=neutral, PublicKeyToken=cc4967777c49a3ff' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Source Error:
Line 57: <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 58: <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
Line 59: <add assembly="ActiveReports.Web, Version=5.2.3.669, Culture=neutral, PublicKeyToken=CC4967777C49A3FF"/>
Line 60: <add assembly="System.Web.Extensions.Design, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
Line 61:
Source File: C:\PafcoMISWeb\web.config Line: 59
Assembly Load Trace: The following information can be helpful to determine why the assembly 'ActiveReports.Web, Version=5.2.3.669, Culture=neutral, PublicKeyToken=cc4967777c49a3ff' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
[/PHP]
در ضمن کانفیگ وب هم اینه
[PHP]<?xml version="1.0"?>
<configuration>
<configSections>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensions SectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGro up, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptReso urceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebService sSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerial izationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/>
<section name="profileService" type="System.Web.Configuration.ScriptingProfileSer viceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<!--<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthentica tionServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" />-->
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServic eSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
</sectionGroup>
</sectionGroup>
</sectionGroup>
<!--<section name="enterpriseLibrary.ConfigurationSource" type="Microsoft.Practices.EnterpriseLibrary.Common .Configuration.ConfigurationSourceSection, Microsoft.Practices.EnterpriseLibrary.Common, Version=3.1.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />-->
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGrou p, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="Pafco.MIS.Web.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<!--
<enterpriseLibrary.ConfigurationSource selectedSource="File Configuration Source">
<sources>
<add name="File Configuration Source" type="Microsoft.Practices.EnterpriseLibrary.Common .Configuration.FileConfigurationSource, Microsoft.Practices.EnterpriseLibrary.Common, Version=3.1.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
filePath="app1.config" />
</sources>
</enterpriseLibrary.ConfigurationSource>
-->
<appSettings>
<add key="DataDynamicsARLic" value="RGN,RGN Warez Group,DD-APN-30-C01339,W44SSM949SWJ449HSHMF"/>
</appSettings>
<system.web>
<sessionState></sessionState>
<!--<identity impersonate="true"
userName="administrator"
password="123"/>-->
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<!--<sessionState timeout="120"></sessionState><customErrors mode="Off"/>-->
<customErrors mode="Off" >
<error statusCode="404" redirect="/Public/AccessDenied.aspx?ErrKey=404" />
</customErrors>
<trace pageOutput="true"/>
<compilation debug="true">
<assemblies>
<add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="ActiveReports.Web, Version=5.2.3.669, Culture=neutral, PublicKeyToken=CC4967777C49A3FF"/>
<add assembly="System.Web.Extensions.Design, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Web.DynamicData, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Web.Abstractions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.ComponentModel.DataAnnotations, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Drawing.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="System.Web.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
</assemblies>
</compilation>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Forms">
<forms loginUrl="login.aspx" name=".ASPXFORMSAUTH" slidingExpiration="true" timeout="15"/>
</authentication>
<authorization>
<deny users="?" />
</authorization>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
<pages>
<controls>
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add tagPrefix="Pafco" namespace="Pafco.Web.UI.WebControls" assembly="Pafco.Web.UI.WebControls"/>
<add tagPrefix="radT" namespace="Telerik.WebControls" assembly="RadTreeView.Net2"/>
<add tagPrefix="uc" namespace="Pafco.MIS.Web" assembly="Pafco.MIS.Web"/>
<add tagPrefix="telerik" namespace="Telerik.Web.UI" assembly="Telerik.Web.UI"/>
<add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit" tagPrefix="ajaxToolkit"/>
</controls>
</pages>
<httpHandlers>
<remove verb="*" path="*.asmx"/>
<add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFact ory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFact ory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/>
<add verb="*" path="*.rpx" type="DataDynamics.ActiveReports.Web.Handlers.RpxH andler, ActiveReports.Web, Version=5.2.3.669, Culture=neutral, PublicKeyToken=cc4967777c49a3ff"/>
<add verb="*" path="*.ActiveReport" type="DataDynamics.ActiveReports.Web.Handlers.Comp iledReportHandler, ActiveReports.Web, Version=5.2.3.669, Culture=neutral, PublicKeyToken=cc4967777c49a3ff"/>
<add verb="*" path="*.ArCacheItem" type="DataDynamics.ActiveReports.Web.Handlers.WebC acheAccessHandler, ActiveReports.Web, Version=5.2.3.669, Culture=neutral, PublicKeyToken=cc4967777c49a3ff"/>
</httpHandlers>
<httpModules>
<add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</httpModules>
<membership defaultProvider="PafMembershipProvider" userIsOnlineTimeWindow="15" >
<providers>
<clear/>
<add name="PafMembershipProvider" type="Pafco.MIS.Web.PafMembershipProvider" />
</providers>
</membership>
</system.web>
<system.web.extensions>
<scripting>
<scriptResourceHandler enableCaching="true" enableCompression="true"/>
</scripting>
</system.web.extensions>
<location path="BasePage">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
<location path="images">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
<location path="styles">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
<location path="js">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
<location path="Public">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
<system.codedom>
<compilers>
<compiler language="c#;cs;csharp" extension=".cs" compilerOptions="/warnaserror-" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<providerOption name="CompilerVersion" value="v3.5"/>
</compiler>
</compilers>
</system.codedom>
<!--
The system.webServer section is required for running ASP.NET AJAX under Internet
Information Services 7.0. It is not necessary for previous version of IIS.
-->
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</modules>
<handlers>
<remove name="WebServiceHandlerFactory-Integrated"/>
<add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFact ory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFact ory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</handlers>
<directoryBrowse enabled="false"/>
</system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions" publicKeyToken="31BF3856AD364E35"/>
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31BF3856AD364E35"/>
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/>
</dependentAssembly>
</assemblyBinding>
</runtime>
<connectionStrings>
<add name="MISConnectionString" connectionString="Data Source=192.168.1.50;Initial Catalog=dina;Persist Security Info=True;User ID=sa;Password=pafcosa;Enlist=False;MultipleActive ResultSets=true;Network Library=dbmssocn;Application Name=Pafco MIS System;Connect Timeout=200; Max Pool Size=200"/>
</connectionStrings>
<applicationSettings>
<Pafco.MIS.Web.Properties.Settings>
<setting name="Pafco_MIS_Web_TBPServices_MerchantService" serializeAs="String">
<value>http://pg.tejaratbank.net:80/paymentGateway/</value>
</setting>
<setting name="Pafco_MIS_Web_bankmellat_PaymentGatewayImplS ervice"
serializeAs="String">
<value>https://pgws.bpm.bankmellat.ir/pgwchannel/services/pgw</value>
</setting>
<setting name="Pafco_MIS_Web_SamanPaymentServices_Reference Payment"
serializeAs="String">
<value>https://acquirer.sb24.com:443/ref-payment/ws/ReferencePayment</value>
</setting>
<setting name="Pafco_MIS_Web_Parsian_Payment_EShopService" serializeAs="String">
<value>https://www.pec24.com/pecpaymentgateway/eshopservice.asmx</value>
</setting>
</Pafco.MIS.Web.Properties.Settings>
</applicationSettings>
</configuration>[/PHP]
