MRN1988
21-01-2013, 14:52
دوستان من امروز اومدم روی لب تاب asus 1215B ویندوز سون 64 بیتی نصب کنم
مسیر نصب تقریبا تا اخراش میره ولی در اخر اخطار
Windows Setup could not configure Windows on this computer’s hardware
رو میده
توی گوگل سرچ کردم مایکروسافت توضیح داده
[ برای مشاهده لینک ، لطفا با نام کاربری خود وارد شوید یا ثبت نام کنید ]
مشکل و چک کردم و فهمیدم از نوع پیکربندی هارد هست
اما راه حلش رو خوب متوجه نمیشم باید چیکار کنم
Method 1: Download the appropriate drivers for your hard disk drive
Download and install the latest drivers for your Windows 7-based or Windows Server 2008 R2-based computer. To do this by using another computer, visit the following Intel website and download the appropriate drivers for your hard disk drive (either 32-bit or 64-bit) to a flash drive. Or, burn the drivers onto a CD or DVD. The flash drive or the disc will then be used during setup of Windows 7 or of Windows Server 2008 R2.
[ برای مشاهده لینک ، لطفا با نام کاربری خود وارد شوید یا ثبت نام کنید ]
[*=left]Go to another computer that has an internet connection and click the link below to download the driver for your hard disk drive (either 32-bit or 64-bit):
[ برای مشاهده لینک ، لطفا با نام کاربری خود وارد شوید یا ثبت نام کنید ]
[*=left]Save this downloaded driver to a DVD or USB flash drive or an external hard drive that can be taken to the PC that you're installing Windows to.
[*=left]Next, start the installation of Windows 7 or Windows Server 2008 R2 and watch for the Load Driver option. You will see this option on the Where do you want to install Windows? screen in the lower right corner.
[*=left]Connect the USB flash or external drive to the computerthat you're installing Windows or take the Windows DVD out of the drive and put the driver DVD into the drive. (You will put the Windows DVD back into that drive after the driver is loaded)
[*=left]Click Load Driver, (clicking this option checks removable media for storage controller drivers)
[*=left]Once the driver is loaded, continue with the Windows setup.
The Advanced Drive Format hard drive will be recognized and Setup will continue as expected.
اون فایلی که گفت رو دانلود کردم اما متوجه نشدم که کدوم مسیر نصب باید برم و انجامش بدم
اون راه حل دوم رو هم تست کردم از بایوس تغییر دادم اما بازم هم اخطار داد
ممنون میشم راهنمایی کنید
-------------------
این مورد هم اضافه کنم قبلا روش ویندوز سون 32 بیتی اورجینال نصب بود
مسیر نصب تقریبا تا اخراش میره ولی در اخر اخطار
Windows Setup could not configure Windows on this computer’s hardware
رو میده
توی گوگل سرچ کردم مایکروسافت توضیح داده
[ برای مشاهده لینک ، لطفا با نام کاربری خود وارد شوید یا ثبت نام کنید ]
مشکل و چک کردم و فهمیدم از نوع پیکربندی هارد هست
اما راه حلش رو خوب متوجه نمیشم باید چیکار کنم
Method 1: Download the appropriate drivers for your hard disk drive
Download and install the latest drivers for your Windows 7-based or Windows Server 2008 R2-based computer. To do this by using another computer, visit the following Intel website and download the appropriate drivers for your hard disk drive (either 32-bit or 64-bit) to a flash drive. Or, burn the drivers onto a CD or DVD. The flash drive or the disc will then be used during setup of Windows 7 or of Windows Server 2008 R2.
[ برای مشاهده لینک ، لطفا با نام کاربری خود وارد شوید یا ثبت نام کنید ]
[*=left]Go to another computer that has an internet connection and click the link below to download the driver for your hard disk drive (either 32-bit or 64-bit):
[ برای مشاهده لینک ، لطفا با نام کاربری خود وارد شوید یا ثبت نام کنید ]
[*=left]Save this downloaded driver to a DVD or USB flash drive or an external hard drive that can be taken to the PC that you're installing Windows to.
[*=left]Next, start the installation of Windows 7 or Windows Server 2008 R2 and watch for the Load Driver option. You will see this option on the Where do you want to install Windows? screen in the lower right corner.
[*=left]Connect the USB flash or external drive to the computerthat you're installing Windows or take the Windows DVD out of the drive and put the driver DVD into the drive. (You will put the Windows DVD back into that drive after the driver is loaded)
[*=left]Click Load Driver, (clicking this option checks removable media for storage controller drivers)
[*=left]Once the driver is loaded, continue with the Windows setup.
The Advanced Drive Format hard drive will be recognized and Setup will continue as expected.
اون فایلی که گفت رو دانلود کردم اما متوجه نشدم که کدوم مسیر نصب باید برم و انجامش بدم
اون راه حل دوم رو هم تست کردم از بایوس تغییر دادم اما بازم هم اخطار داد
ممنون میشم راهنمایی کنید
-------------------
این مورد هم اضافه کنم قبلا روش ویندوز سون 32 بیتی اورجینال نصب بود