تغییرات رجیستری
سلام
من یه کارت گرافیک 4550 دارم که از ویندوز 10 پشتیبانی نمیکنه و تصویر رو در حداقل بهم نشون میده.
توی فروم های خارجی دیدم با تغییر رجیستری میشه از این کارت توی ویندوز 10 استفاده کرد.
الان مشکل اینجاست که نمیدونم این تغییرات رو چجوری باید بدم. تا قسمت پیدا کردن کارت گرافیکم بلدم برم ولی از جایی که میگه 0001 و0002 و0003 رو پیدا کنید دیگه نمیتونم جلوتر برم
ممنون میشم راهنماییم کنید
اینم از دستور :
u can use windows 10 with hd radeon 4xxx!!
install catalyst beta driver (13.4)
use hd Radeon 4xxx with a small registry fix:
Bellow is the NO OVERSCAN and NO UNDERSCAN Fix. Your graphic-card works without it good. (but you see black borders on some Monitors/graphic-cards!!!)
!! check classids ({3F59FB0A-B618-4CFA-9F36-D4D1CD4AB186} and {3F59FB0A-B618-4CFA-9F36-D4D1CD4AB186}) if they are same on your system!! else replace them with yours!!
*.REG FILE CONTENT:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Video\{3F59FB0A-B618-4CFA-9F36-D4D1CD4AB186}\0000]
"TVEnableOverscan"=dword:00000000
"DigitalHDTVDefaultUnderscan"=dword:00000000
"DALR6 DFPI 21920x1080x0x60"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21680x1050x0x60"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21920x1080x0x59"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21024x768x0x60"=hex:00,00,00,00,00,00,00,00,00,00, 00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21280x1024x0x75"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21920x1080x0x30"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21920x1080x0x50"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Video\{3F59FB0A-B618-4CFA-9F36-D4D1CD4AB186}\0001]
"TVEnableOverscan"=dword:00000000
"DigitalHDTVDefaultUnderscan"=dword:00000000
"DALR6 DFPI 21920x1080x0x60"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21680x1050x0x60"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21920x1080x0x59"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21024x768x0x60"=hex:00,00,00,00,00,00,00,00,00,00, 00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21280x1024x0x75"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21920x1080x0x30"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"DALR6 DFPI 21920x1080x0x50"=hex:00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
*.REG FILE END
این یکی رو به روش ساده تر گفته:
1. Run regedit.exe
2. Find "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Video"
3. Make a backup REG-file (right click on the key tree and export)
4. Find out your video classids (like 3F59FB0A-B618-4CFA-9F36-D4D1CD4AB186} or {3F59FB0A-B618-4CFA-9F36-D4D1CD4AB186})
5. Find 0000, 0001, 0002 entries
6. Change Values to:
"TVEnableOverscan"=dword:00000000
"DigitalHDTVDefaultUnderscan"=dword:00000000
Find "DALR6 DFPI 2 xxxxxxxxxxxxxxxxxxxx" entries
1920x1080x0x60 = 1920 pixel horizontal; 1080 pixel vertical; 60 Herz (monitor frequenzy)
Modify ALL "DALR6 DFPI 2 xxx..." values to "00" (there are some few not "00"s) [don't change the string length! - click edit, select non "00" push delete key and type 00]
7. Restart PC (dont change Windows or CCC settings they can overwrite your new values)
8. Have fun!
Sent from my LG-H845 using Tapatalk
جواب بصورت نقل قول
