فعال کردن تیونر دیجیتال ال سی دی شارپ
سلام
چگونه می شود کانال های دیجیتال رو با این مدل دریافت کرد
SHARP LC-32M4400X LCD TV
چگونه وارد منو مخفی باید شد ؟؟؟
دوستان لطفا بنده رو راهنمایی بفرمایید .
فعال کردن تیونر دیجیتال ال سی دی شارپ
سلام
چگونه می شود کانال های دیجیتال رو با این مدل دریافت کرد
SHARP LC-32M4400X LCD TV
چگونه وارد منو مخفی باید شد ؟؟؟
دوستان لطفا بنده رو راهنمایی بفرمایید .
جای دیگری عجله کردم باید پست جدید تایید می شد!
دوستان لطفا من رو راهنمایی بفرمایید متشكرم.
چگونه دیجیتال ال سی دی شارپ رو فعال کنم مدل ال سی دی LC-32M4400X
اموزش زیر رو از نت گرفتم چون فارسی نیست میترسم. البته قبلا با آموزش های دوستان اینجا (p30world) دیجیتال سامسونگ فعال کردم که با شارپ فرق داره!
Sharp Service Menu Instructions
LCD Sets 2016
Press the Menu button and then the right arrow button on the your remote, and then arrow down to the Sound settings. Arrow right and enter the Advanced Audio Settings, and arrow down to the Balance section. Make sure it is set to 0.
Type "1969" on your remote. Your TV will leave the menu screen, and a green "M" will appear in the upper left corner of your screen.
Press the Menu button to access the service menu. The 'Factory' tab at the top will be highlighted in yellow.
LCD Sets
While the LCD is on, unplug the power cable.
Then while pressing the {INPUT} & {VOL -} buttons on the remote, plug the power cable back into the outlet.
When it powers up you will see a little "k" appear in brackets.
Then on the TV, press and hold {VOL -} & {CH -} down and release.
The Service Menu will be displayed.
Use {CH+} {CH -} buttons to navigate, Use {VOL+} {VOL -} buttons to adjust the value.
Other Sets (CRT)
Unplug the TV
Press and hold the {VOL -} & {CH+} buttons.
While holding the above buttons, plug in the TV.
The TV will turn on with the Service Menu displayed.
Use {CH+} {CH -} buttons to navigate, Use {VOL+} {VOL -} buttons to adjust the value.
Alternative Method
Press the {MENU} button.
Then press the {4} {7} {2} {5} buttons.
The Service Menu will be displayed.
Use the {UP} {DOWN} buttons to select items.
Use the {LEFT} {RIGHT} buttons to change settings.
To exit, turn the power off.
Sharp Projector Service Menu Access Method 1
Press {UP}, {UP}, {DOWN}, {DOWN}, {RIGHT}, {LEFT} & {ENTER} buttons on the remote control.
Sharp Projector Service Menu Access Method 2
Press {INPUT}, {UP}, {DOWN}, {ENTER}, {ENTER} & {MENU} buttons on the back of the Projector.
To exit the Service Menu: Press {INPUT}, {UP}, {DOWN}, {ENTER}, {ENTER} & {MENU} buttons again on the back of the Projector.
در صورت امکان لینک دانلود نرم افزار این مدل اینجا بزارین
SHARP LC-32M4400X LCD TV
روی کارتون نوشته ----T (دیجیتالی زمینیبه)!
با اموزش زیر وارد منو مخفی شدم و مدل اصل نوشته 32M450Mنوشته شده توسط h@$hem [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
یکی لطفا کنه لینک دانلود نرم افزار این 32M450M مدل اینجا بزاره
While the LCD is on, unplug the power cable.
Then while pressing the {INPUT} & {VOL -} buttons on the remote, plug the power cable back into the outlet.
When it powers up you will see a little "k" appear in brackets.
Then on the TV, press and hold {VOL -} & {CH -} down and release.
The Service Menu will be displayed
هم اکنون 1 کاربر در حال مشاهده این تاپیک میباشد. (0 کاربر عضو شده و 1 مهمان)