در جواب [ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ] نرم افزار هایی که استفاده میشه اغلب اینا
هستن .سیستم پیشنهادی بعضی هارو پیدا کردم ولی بعضی هاش ..
MathWorks MATLAB
MAPLE
COMSOL Multiphysics
SolidWorks: 3D CAD Design Software*
PRO/II Comprehensive Process Stimulation*
DYNSIM: Dynamic Process Simulation Software*
CHEMCAD
Aspen
Hysys
fluent
SolidWorks: 3D CAD Design Software*(For chemicel engineering- bio
CHEMCAD minimum system requirements
Processor speed: 500 MHz or higher
Operating system: Windows XP, Vista, 7, or 8
RAM: 256 MB
Video card: 128 MB or higher video memory
Display resolution: 1024 x 768 or higher
Hard disk space: 500 MB (750 MB during installation)
comsol
At least 1 GB memory, but 4 GB per processor core or more is recommended
1-5 GB of disk space
Intel Pentium IV or AMD Athlon XP processor or later
Aspen
System requirements
Minimum:
Processor: Intel; 1.00GHz or higher
DVD-ROM
Hard drive: 40 GB
Memory: 1 GB for XP, 2 GB for VISTA
Recommended:
Processor: Intel ® CoreTM2 Duo 2.00GHz or higher
DVD ROM
Hard drive: 250 GB
RAM: 3 GB
Fluent
Windows XP Professional or Windows Vista
Duo Core or Quad Core Processors 2.0 Ghz or faster
100 GB or more hard drives in a RAID 0 configuration
Two (2) to Three (3) GB of RAM
DVD R/W Drive
256 MB (or higher) graphics card (DRD has had good experience with NVIDIA cards)
همین SolidWorks: 3D CAD Design Software هم فکر کنم بالاترین کانفینگ رو بخواد بین این نرم افزار ها .طراحی سه بعدیه و ...
نظر دوستان چی هست ؟این لپ تاپ مناسبه ؟یا پایین تر یا بالاتر باشه ؟