تبلیغات :
آکوستیک ، فوم شانه تخم مرغی، صداگیر ماینر ، یونولیت
دستگاه جوجه کشی حرفه ای
فروش آنلاین لباس کودک
خرید فالوور ایرانی
خرید فالوور اینستاگرام
خرید ممبر تلگرام

[ + افزودن آگهی متنی جدید ]




نمايش نتايج 1 به 5 از 5

نام تاپيک: کدهای مخفی موبایل ( آخرین ویرایش )

  1. #1
    آخر فروم باز Navid's Avatar
    تاريخ عضويت
    Oct 2004
    پست ها
    3,124

    پيش فرض کدهای مخفی موبایل ( آخرین ویرایش )

    Siemens Mobile Secret Codes:


    C25:

    SP unlock *#0003*(secret code 8 digits)#

    *#0606# shows you Secret Code, but only without SIM Card.

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    Resets language to automatic selection : * # 0000 # then Green button

    Pin Out (electrical connections)

    1- GND
    2- SB
    3- POWER
    4- NC
    5- TX
    6- RX
    7- CLOCK
    8- DATA
    9- GND MIC
    10- HF MIC
    11- AUDIO
    12- GND AUDIO


    Languages:

    *#0000#+green phone - choose automaticaly
    *#0001#+green phone - English
    *#0030#+green phone - Greek
    *#0031#+green phone - Netherlands
    *#0032#+green phone - French
    *#0034#+green phone - Spanish
    *#0039#+green phone - Italian
    *#0049#+green phone - German
    *#0090#+green phone - Turkish

    How to change PIN:

    **04*old PIN*new PIN*new PIN#

    How to check simlock status

    *#0606# and then press left soft-key, you will see strange characters, then text ("brak blokad"). If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information after clicking on left key (you will see IMEI and software version).


    S4:

    Monitor Mode - how to activate:

    Press left soft-key, then 9 (SET UP) 8 (Phone Status). You will see IMEI number, then press left soft-key and in order 7684666 and red phone at the end (monitor mode has been activated). To read information from Monitor Mode - press left soft-key, then 5 (GSM SERVICE) and 6 (Monitor). Monitor mode turns off when you switch off the phone. You must activate it again if you want.

    How to see date of software:

    Press left soft-key, then 9 (SET UP) 8 (Phone status). You will see IMEI number, then press twice left soft-key, 98, left soft-key, 7684666, red phone (activates Monitor Mode), left soft-key, 56 (turns on Monitor Mode), left soft-key, 98, left soft-key, 7684666, hang up (red phone) >abck to "normal" and then left soft-key, 56.

    S6, S8:

    If you add to phonebook under 'own phone number' +12022243121 with namez (for example MMI), then you will see something smile.gif

    S10, E10:

    In phonebook enter +12022243121 as your own phone no. You will see a picture with sun, two palms and greetings.

    S15e:

    Monitor Mode:

    Code: *#7436267*8378# (*#SIEMENS*TEST#)
    Hold red phone button until it code disapears.
    Menu 3.3.4 Choose frequency.
    Menu 3.3.4.1 Automaticaly.
    Menu 3.3.4.2 Choose GSM-900
    Menu 3.3.4.3 Choose GSM-1800

    Menu 10.1 MS info
    Menu 10.2 Soft date
    Menu 10.2.1 Software version.
    Menu 10.2.2 EEProm version.
    Menu 10.3 Tst and product info.
    Menu 10.3.1 Handware data.
    Menu 10.3.2 Date of manufacture
    Menu 10.3.3 Service date
    Menu 10.3.4 Date of repair.


    S25:

    Enhanced Full Rate
    *#3370# turns on
    #3370# turns off

    Haft Rate Mode
    *#4720# turns on
    #4720# turns off.

    Languages:

    *#0000#+green phone - choose automaticaly
    *#0001#+green phone - English
    *#0030#+green phone - Greek
    *#0031#+green phone - Netherlands
    *#0032#+green phone - French
    *#0034#+green phone - Spanish
    *#0039#+green phone - Italian
    *#0049#+green phone - German
    *#0090#+green phone - Turkish

    How to change PIN2?

    **04*old PIN2*new PIN2*new PIN2#

    What is my software version?

    Menu 8-8-2 press left-softkey when you see IMEI number, or *#06# and then green phone button and then press left soft-key.

    How to extend battery life:

    IrDA - turn on only when you need.
    Turn off automatic network search (6-3)Turn off Vibration alarm.

    SP unlock *#0003*(secret code 8 digits)#

    *#0606# shows you Secret Code, but only without SIM Card.

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    Resets language to automatic selection : * # 0000 # then Green button



    S25, M35, S35, C35

    SP unlock *#0003*(secret code 8 digits)#

    *#0606# shows you Secret Code, but only without SIM Card.

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    Resets language to automatic selection : * # 0000 # then Green button






    Secret Codes Of Nokia Mobiles:


    Below we present secret codes of nokia mobile phones which are very useful for people who unlock phones and for amateurs of this topic. These special key sequences entered fromkeyboard of phone allow you to get some important information like IMEI number, release date, software version and much more. You can also choose default language, activatenetmonitor ect.


    1610/1630

    *#170602112302# (software version)

    1610/1611

    IMEI number: -*# 0 6 #
    Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #
    Simlock status: - # 9 2 7 0 2 6 8 9 #


    2110

    *#9999# (software version)

    2110i/2110e

    *#170602112302# or (depends on model)*#682371158412125# (software version)


    NOKIA3110

    *#06# -IMEI

    *#3110# -Software version

    ##002# - allows to turn off voice mail.

    *#7780# - restore factory settings

    *#746025625#(or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)

    *#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:

    6232 (OK)displays month and year of production date (ie "0198")

    7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")

    7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")

    9268 (OK) -displays serial number

    37832 (OK) -sets purchase date in format MMYY (MM - month, YY - year)- attention: you can set it only once, so beware !

    87267 (OK)-displays message "Confirm Transfer?" - meaning is unknown (?)

    * # 9 2 7 0 2 6 8 9 # -Simlock info

    *#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)

    *#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)

    *#77# (call) -(work s only in some networks)

    *#33/35# (call -displays message "Service not active".

    **31# (call) -your no. will not be showed to others when you make a call



    3210


    *#06# -IMEI

    *#0000# -software version

    *#92702689# (or *#war0anty#)- enters service mode.

    *3370# -Turns on sound encoding system - Enhanced Full Rate.


    #3370# -Turns off sound encoding system Enhanced Full Rate .

    *4720# -Turns on battery save mode - saves about 30 % of energy.

    #4720# -Turns off battery save mode.

    xx# -Replace xx with desired phonebook entry - press # and you will see it on display.


    51XX


    *#06# -IMEI

    *#0000# - Software version

    *#92702689#( or *#war0anty#) Enter service mode.

    *3370# -Turns on sound encoding system - Enhanced Full Rate.

    #3370# -Turns off sound encoding system - Enhanced Full Rate.

    *4720# -Turns on battery save mode - saves about 30 % of energy.

    #4720# -Turns off battery save mode.

    #pw+1234567890+1 -provider lock status

    #pw+1234567890+2 -Network lock status

    #pw+1234567890+3 -Provider lock status

    #pw+1234567890+4 - SimCard lock status


    NOKIA 61XX


    *#06# -IMEI

    *#0000# ;-*#99 99# (Nokia 6130)


    *#92702689# (or *#war0anty#) Software versionEnter service mode.

    *3370# -Turns on sound encoding system - Enhanced Full Rate.

    #3370# -Turns off sound encoding system - Enhanced Full Rate.

    *4720# -Turns on battery save mode - saves about 30 % of energy.

    #4720# -Turns off battery save mode.


    NOKIA8810


    *#06# - IMEI

    *#0000# -Software version

    *#92702689# (or *#war0anty#) Enter service mode.

    *3370# -Turns on sound encoding system - Enhanced Full Rate.

    #3370# -Turns off sound encoding system - Enhanced Full Rate.

    *4720# -Turns on battery save mode - saves about 30 % of energy

    #4720# -Turns off battery save mode - saves about 30 % of energy



    NOKIA99OO


    *#06# -IMEI

    *#682371158412125# -Software version

    *#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.



    NOKIA 911O


    *#06# IMEI


    *#0000# SOFTWARE VERSION

    *3370# Turns on sound encoding system - Enhanced Full Rate.

    #3370# Turns off sound encoding system - Enhanced Full Rate.

    *4720# Turns on battery save mode - saves about 30 % of energy.

    #4720# Turns off battery save mode.



    NOKIA 81XX


    *#06# IMEI
    *#8110# Software version
    xx# Replace xx with desired phonebook entry - press # and you will see it on display

    *#92702689# (or *#warOanty#)

    "Warranty code:" - you have to enter one of the following codes:

    9268 (OK) displays IMEI (International Mobile Equipment Identification)

    6232 (OK) displays date of manufacture in format MMYY (MM - month, RR - year)


    7832 (OK) displays date of purchase

    7332 (OK) displays date of repair or upgrade

    37832 (OK) sets date of purchase in format MMYY (MM - month, RR - year) - attention: you can set it only once, so beware !!!

    87267 (OK) transmits user data/move data do service PC




    Motorola Codes:



    Motorola 920
    ---------------


    Press menu and type one of these numbers and press OK:

    11 = Status Review
    13 = Available Networks
    14 = Preferred Networks
    22 = Select Keypad Tones
    25 = Require SIM Card PIN
    26 = Language Selection
    32 = Repetitive Timer
    33 = Single Alert Timer
    34 = Set IN-Call Display
    35 = Show Call Timers
    36 = Show Call Charges
    37 = Call Charge Settings
    38 = Reset All Timers
    43 = Reset All Timers
    45 = Show Last Call
    46 = Total For All Calls
    47 = Lifetime Timer
    51 = Change Unlock Code
    52 = Master Reset
    53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
    54 = New Security Code
    55 = Automatic Lock
    63 = Battery Saving Mode

    Free call tip

    1 Enter the phone number
    2 Enter OK
    3 Type *#06#
    4 Press Button C
    5 And finally press the button for power off.

    You should now be able to talk without being billed.


    The 54# Tip:

    Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.





    Motorola 930
    --------------


    Press menu and type one of these numbers and press OK:

    11 = Status Review
    13 = Available Networks
    14 = Preferred Networks
    22 = Select Keypad Tones
    25 = Require SIM Card PIN
    26 = Language Selection
    32 = Repetitive Timer
    33 = Single Alert Timer
    34 = Set IN-Call Display
    35 = Show Call Timers
    36 = Show Call Charges
    37 = Call Charge Settings
    38 = Reset All Timers
    43 = Reset All Timers
    45 = Show Last Call
    46 = Total For All Calls
    47 = Lifetime Timer
    51 = Change Unlock Code
    52 = Master Reset
    53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
    54 = New Security Code
    55 = Automatic Lock
    63 = Battery Saving Mode

    Free call tip

    1 Enter the phone number
    2 Enter OK
    3 Type *#06#
    4 Press Button C
    5 And finally press the button for power off.

    You should now be able to talk without being billed.


    Motorola 930

    The 54# Tip:

    Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.





    Motorola 6200
    --------------



    (Note: pause means the * key held in until box appears)
    To activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 1 [pause] [ok]
    You now have to press the [MENU] and scroll to the 'Eng
    Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 0 [pause] [ok]
    This only works with some versions of software.

    These countries has been reported working:

    UK (Orange)
    AU

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it
    is answered, press [MENU] until 'Eng Field Option' is
    displayed, press [OK], select 'Active Cell', press [OK],
    press [MENU] until 'Time Adv xxx' appears, where xxx is
    a number. Multiply this number by 550, and the result is
    the distance from the RBS (Radio Base Station), in
    meters.

    Get Signal Quality - press [MENU] until 'Eng Field
    Option' is displayed, press [OK], select 'Active Cell',
    press [OK], press [MENU] until 'C1' appears. This is the
    signal quality. If it becomes negative for longer than 5
    seconds, a new cell is selected.

    Pin Outs

    Numbered left to right, keypad up, battery down

    1. Audio Ground
    2. V+
    3. True data (TD) (input)
    4. Downlink - Complimentary data (CD) (input)
    5. Uplink - Return data (RD) (output)
    6. GND
    7. Audio Out - on/off
    8. Audio In
    9. Manual Test - ???
    10. Battery Feedback
    11. Antenna connector






    Motorola 7500
    -------------



    (Note: pause means the * key held in until box appears)
    To activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 1 [pause] [ok]
    You now have to press the [MENU] and scroll to the 'Eng
    Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 0 [pause] [ok]
    This only works with some versions of software.

    These countries has been reported working:

    IT (model: F16 HW: 5.2 SW: 2.1)


    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it
    is answered, press [MENU] until 'Eng Field Option' is
    displayed, press [OK], select 'Active Cell', press [OK],
    press [MENU] until 'Time Adv xxx' appears, where xxx is
    a number. Multiply this number by 550, and the result is
    the distance from the RBS (Radio Base Station), in
    meters.

    Get Signal Quality - press [MENU] until 'Eng Field
    Option' is displayed, press [OK], select 'Active Cell',
    press [OK], press [MENU] until 'C1' appears. This is the
    signal quality. If it becomes negative for longer than 5
    seconds, a new cell is selected.

    Pin Outs
    Numbered right to left, keypad up, battery down looking

    1. Gnd
    2. Pos
    3. True data (TD) (input)
    4. Complimentary data (CD) (input)
    5. Return data (RD) (output)
    6. Audio gnd
    7. Audio out
    8. Audioin




    Motorola 8200
    --------------



    (Note: pause means the * key held in until box appears)
    To activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 1 [pause] [ok]
    You now have to press the [MENU] and scroll to the 'Eng
    Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 0 [pause] [ok]
    This only works with some versions of software.

    These countries has been reported working:

    ES, AU, NL, BE


    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it
    is answered, press [MENU] until 'Eng Field Option' is
    displayed, press [OK], select 'Active Cell', press [OK],
    press [MENU] until 'Time Adv xxx' appears, where xxx is
    a number. Multiply this number by 550, and the result is
    the distance from the RBS (Radio Base Station), in
    meters.

    Get Signal Quality - press [MENU] until 'Eng Field
    Option' is displayed, press [OK], select 'Active Cell',
    press [OK], press [MENU] until 'C1' appears. This is the
    signal quality. If it becomes negative for longer than 5
    seconds, a new cell is selected.

    Pin Outs

    Numbered right to left, keypad up, battery down looking

    1. Audio Ground
    2. V+
    3. True data (TD) (input)
    4. Downlink - Complimentary data (CD) (input)
    5. Uplink - Return data (RD) (output)
    6. GND
    7. Audio Out - on/off
    8. Audio In
    9. Manual Test - ???
    10. Battery Feedback
    11. Antenna connector





    Motorola 8400
    -------------



    (Note: pause means the * key held in until box appears)
    To activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 1 [pause] [ok]
    You now have to press the [MENU] and scroll to the 'Eng
    Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 0 [pause] [ok]
    This only works with some versions of software.

    These countries has been reported working:

    ES, AU, NL, BE


    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it
    is answered, press [MENU] until 'Eng Field Option' is
    displayed, press [OK], select 'Active Cell', press [OK],
    press [MENU] until 'Time Adv xxx' appears, where xxx is
    a number. Multiply this number by 550, and the result is
    the distance from the RBS (Radio Base Station), in
    meters.

    Get Signal Quality - press [MENU] until 'Eng Field
    Option' is displayed, press [OK], select 'Active Cell',
    press [OK], press [MENU] until 'C1' appears. This is the
    signal quality. If it becomes negative for longer than 5
    seconds, a new cell is selected.

    Pin Outs

    Numbered right to left, keypad up, battery down looking

    1. Audio Ground
    2. V+
    3. True data (TD) (input)
    4. Downlink - Complimentary data (CD) (input)
    5. Uplink - Return data (RD) (output)
    6. GND
    7. Audio Out - on/off
    8. Audio In
    9. Manual Test - ???
    10. Battery Feedback
    11. Antenna connector





    Motorola 8700
    --------------



    *#06# for checking the IMEI (International Mobile Equipment Identity)

    Activate RBS

    (Note: pause means the * key held in until box appears)
    To activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 1 [pause] [ok]
    You now have to press the [MENU] and scroll to the 'Eng
    Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 0 [pause] [ok]
    This only works with some versions of software.

    These countries has been reported working:

    AU, IT, SG, DE, ES, ZA

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it
    is answered, press [MENU] until 'Eng Field Option' is
    displayed, press [OK], select 'Active Cell', press [OK],
    press [MENU] until 'Time Adv xxx' appears, where xxx is
    a number. Multiply this number by 550, and the result is
    the distance from the RBS (Radio Base Station), in
    meters.

    Get Signal Quality - press [MENU] until 'Eng Field
    Option' is displayed, press [OK], select 'Active Cell',
    press [OK], press [MENU] until 'C1' appears. This is the
    signal quality. If it becomes negative for longer than 5
    seconds, a new cell is selected.





    Motorola CD 160
    ---------------



    Press menu and type one of these numbers and press OK:

    11 = Status Review
    13 = Available Networks
    14 = Preferred Networks
    22 = Select Keypad Tones
    25 = Require SIM Card PIN
    26 = Language Selection
    32 = Repetitive Timer
    33 = Single Alert Timer
    34 = Set IN-Call Display
    35 = Show Call Timers
    36 = Show Call Charges
    37 = Call Charge Settings
    38 = Reset All Timers
    43 = Reset All Timers
    45 = Show Last Call
    46 = Total For All Calls
    47 = Lifetime Timer
    51 = Change Unlock Code
    52 = Master Reset
    53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
    54 = New Security Code
    55 = Automatic Lock
    63 = Battery Saving Mode

    Free call tip

    1 Enter the phone number
    2 Enter OK
    3 Type *#06#
    4 Press Button C
    5 And finally press the button for power off.

    You should now be able to talk without being billed.





    Motorola CD 520
    ----------------



    Press menu and type one of these numbers and press OK:

    11 = Status Review
    13 = Available Networks
    14 = Preferred Networks
    22 = Select Keypad Tones
    25 = Require SIM Card PIN
    26 = Language Selection
    32 = Repetitive Timer
    33 = Single Alert Timer
    34 = Set IN-Call Display
    35 = Show Call Timers
    36 = Show Call Charges
    37 = Call Charge Settings
    38 = Reset All Timers
    43 = Reset All Timers
    45 = Show Last Call
    46 = Total For All Calls
    47 = Lifetime Timer
    51 = Change Unlock Code
    52 = Master Reset
    53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
    54 = New Security Code
    55 = Automatic Lock
    63 = Battery Saving Mode

    Free call tip

    1 Enter the phone number
    2 Enter OK
    3 Type *#06#
    4 Press Button C
    5 And finally press the button for power off.

    You should now be able to talk without being billed.





    Motorola d460
    --------------



    #06# for checking the IMEI (International Mobile Equipment Identity)

    Activate RBS

    (Note: pause means the * key held in until box appears)
    To activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 1 [pause] [ok]
    You now have to press the [MENU] and scroll to the 'Eng
    Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3
    [pause] 0 [pause] [ok]
    This only works with some versions of software.

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it
    is answered, press [MENU] until 'Eng Field Option' is
    displayed, press [OK], select 'Active Cell', press [OK],
    press [MENU] until 'Time Adv xxx' appears, where xxx is
    a number. Multiply this number by 550, and the result is
    the distance from the RBS (Radio Base Station), in
    meters.

    Get Signal Quality - press [MENU] until 'Eng Field
    Option' is displayed, press [OK], select 'Active Cell',
    press [OK], press [MENU] until 'C1' appears. This is the
    signal quality. If it becomes negative for longer than 5
    seconds, a new cell is selected.





    Motorola V3688
    ---------------



    #06# for checking the IMEI (International Mobile Equipment Identity)

    Enhanced Full Rate Codec (EFR):

    To Enable EFR press [][][] 119 [] 1 [] OK.
    To Disable EFR press [][][] 119 [] 0 [] OK

    NOTE: Nothing appears on Screen.





    Ericsson Mobile Secret Codes:


    T10

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    >*<<*<* for checking the firmware revision information (software release)

    >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

    Shortcut for Last Dialed call menu

    If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
    stroke instead: First '0' then '#'.

    Access menu without Sim card

    To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again. And this will not care about Phone lock!

    A way to (un)lock your cell phone on to the network(subset):
    1. Press <**<
    2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset? (Use arrow keys to select)
    3. Enter the NCK number (code is provided by the SP)
    4. You have 5 attemps to do this
    5. Then your cell phone will work 'only' with the network

    Warning: The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

    Message Report

    When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

    T18

    *#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

    XXXXXX XX XXXXXX X

    TAC FAC SNR SP

    TAC = Type approval code
    FAC = Final assembly code
    SNR = Serial number
    SP = Spare

    To access SIM-Locking menu of your phone, press: < * [CLR] <
    Be careful or you may lock your phone.

    Message Report

    When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

    T28

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    >*<<*<* for checking the firmware revision information (software release)

    >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.

    >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

    The Service Provider (SP) Lock

    The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    To activate/deactivate this lock one needs a special secret code that is not available to the end user.

    Here is how to activate the menu:

    <**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

    <**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

    Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

    Shortcut for Last Dialed call menu

    If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
    stroke instead: First '0' then '#'.

    Message Report

    When you are writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.



    388

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    *#0000# to reset the phones menu-language to English.

    >*<<*<* for checking the firmware revision information (software release)

    >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)

    >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

    The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)

    <**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

    <**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

    Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

    Shortcut for Last Dialed call menu...

    If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
    stroke instead: First '0' then '#'.

    Access menu without Sim card ...

    To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

    GA628

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    *#0000# to reset the phones menu-language to English.

    *#103# then YES Time and date will be shown.

    >*<<*<* for checking the firmware revision information (software release)

    >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)

    >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

    The Service Provider (SP) Lock

    The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    To activate/deactivate this lock one needs a special secret code that is not available to the end user.

    Here is how to activate the menu:

    <**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

    <**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

    Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

    Shortcut for Last Dialed call menu

    If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
    stroke instead: First '0' then '#'.

    Bat. level indicator when turned OFF

    When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

    Access menu without Sim card

    To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

    Alarm Clock Menu

    Go to MissedCall Empty the list Press the -> key for a second or two The option Menu size turns up Choose 'yes' and go from there.

    An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.

    Free phone calls using the GA628

    This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.
    The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)... if it can be traced? - we don't know...

    Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!

    Another variant of the code

    Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.

    If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???

  2. #2
    اگه نباشه جاش خالی می مونه mohammadnasri's Avatar
    تاريخ عضويت
    Jul 2005
    پست ها
    362

    پيش فرض

    سلام

    با تشكر . آيا نوكيا 3220 هم كد مخفي داره؟

    اگه لطف كني ممنون ميشم.

  3. #3
    پروفشنال
    تاريخ عضويت
    May 2005
    پست ها
    703

    14 2300

    كدهاي نوكيا 2300 رو كسي داره؟

  4. #4
    داره خودمونی میشه bluetooth's Avatar
    تاريخ عضويت
    Jun 2006
    محل سكونت
    Esf
    پست ها
    146

    پيش فرض

    lock code مو بایلم گم شده . چه طوری باید پیداش کنم؟

  5. #5
    داره خودمونی میشه
    تاريخ عضويت
    Dec 2005
    پست ها
    31

    پيش فرض

    كدهاي نوكيا 3250 را كي داره

Thread Information

Users Browsing this Thread

هم اکنون 1 کاربر در حال مشاهده این تاپیک میباشد. (0 کاربر عضو شده و 1 مهمان)

User Tag List

قوانين ايجاد تاپيک در انجمن

  • شما نمی توانید تاپیک ایحاد کنید
  • شما نمی توانید پاسخی ارسال کنید
  • شما نمی توانید فایل پیوست کنید
  • شما نمی توانید پاسخ خود را ویرایش کنید
  •