سلام دوست عزيزنقل قول:
نوشته شده توسط mehdi_ok1
يه امتحاني بکن.
توي insert برو و بعد page number و بعد format رو کليک کن. شايد continiue from previous section فعال نباشه. فعالش کن.
اگه درست نشد خبر بده يه فکر ديگه بکنيم.
Printable View
سلام دوست عزيزنقل قول:
نوشته شده توسط mehdi_ok1
يه امتحاني بکن.
توي insert برو و بعد page number و بعد format رو کليک کن. شايد continiue from previous section فعال نباشه. فعالش کن.
اگه درست نشد خبر بده يه فکر ديگه بکنيم.
سلام razel جان
البته توي اون پيغامي که گذاشتي يه چيزهايي ميگه و از اونجا که شما ننوشتي کدوم تنظيمات رو دست زدي شرمنده که ميپرسم اما ايا macro security level رو هم تغيير دادي؟
دوست عزیز من تمام گزینه هایی که با فلش نشون دادم رو امتحان کردم و هیچ اتفاقی نیافتاد:نقل قول:
نوشته شده توسط shvalaie
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
این رو تو همون پیغامی که میاد هم گفته که اون قسمت رو دستکاری کنید.
در ضمن به سوال دومم هم یه نظری بکنین بد نیست.
خیلی ممنوننقل قول:
نوشته شده توسط خودم
سلامنقل قول:
نوشته شده توسط razel
البته ورد من با مال شما فرق ميکنه اما توي trusted publisher براي من trust all install add-ins and فعاله.
که البته براي شما خيلي پيشرفتهتره چون شما add-in جداگانهاي دارين. فکر کنم که توي تمام قسمتها بايد تغييراتي ايجاد کنين.
البته فکر ميکنم که توي تصويري که گذاشتين بايد گزينه دوم يا سوم رو فعال کنين.
اما حالا يه راه حلي به نظرم رسيد. چرا از help خود word کمک نميگيرين؟ توي خيلي موارد به من کمک زيادي کرده.
دوست عزيز - البته كه سوال دومتون رو ديدم و البته كه اگه جوابي براش داشتم مي دادم.
شرمنده
يكي از دوستان به نام پرنس
توي يك تاپيك جداگانه چيزي درباره اتوماتيك عوض شدن و فارسي شدن ورد 2007 گفتن.
متاسفانه من ورد 2007 ندارم اما توي ورد يه جا هست كه ميتوني بهش بگي چه كارهايي رو اتوماتيك انجام نده و يا بده.
اين option براي من توي insert و auto text و auto text هستش. اميدوارم که براي شما هم همونجا باشه.
معمولا وقتي که word رو install ميکنم. اولين کاري که ميکنم تمام پارامترهاي توي اين option رو غيرفعال ميکنم. تا سرخود فرمت يا چيزي رو عوض نکنه. شايد براي شما هم يه پارامتري گذاشته باشن که بايد غيرفعال کنين.
[QUOTE=shvalaie]درود و سلام
اي بابا نيكي و پرسش؟ ممنون ميشم اگه توضيح بدين.[/QUOTE
1) tools
2) Option
3) Complex Scripts
4) Numeral: Hindi
5) Month Names: Arabic
دوستان سلام
من یه مشکلی دارم که اعضابمو حسابی داغون کرده
توی ورد 2007 من هر وقت بیام چیزی بنویسم به طور خودکار زبان سیستممو فارسی می کن و میره از چپ به راست می نویسه
منم معمولا انکلیسی باید بنویسم اینه که کلی همه چی به هم می ریزه
توی reginol setting هم محل زا گذاشتم انگلیس ولی بازم درست نشده
کسی میدونه چیکار باید بکنم تا درست بشه؟
ممنون
سلامنقل قول:
نوشته شده توسط shvalaie
دوست عزيز دشمنت شرمنده باشه. همين که لطف داري و توجه مي کني برام خيليه.
من متن اون Error که ميده رو به طور کامل اينجا قرار ميدم تا اگر شما و ديگر دوستان متوجه شديد از چيه ،کمکم کني. من خودم زبانم اصلا خوب نيست.
ممنون مي شم توجه کنيد:
اصلا منظور از Macro چيه . به چه درد مي خوره.کد:This error usually occurs because of macro security settings. If you know that the macro comes from a source that you trust, you can change your macro security settings to allow you to enable the macro. The way that you change your macro security settings depends on the Microsoft Office System program that you are using.
Microsoft Office Access, Microsoft Office Excel, Microsoft Office PowerPoint, or Microsoft Office Word --
To check your macro security settings, click the Microsoft Office Button, click <program name> Options, click Trust Center, and then click Trust Center Settings.
If macro security is set to Disable all macros without notification, all macros are automatically disabled. Use the following procedure to enable the macro.
In the Trust Center dialog box, click Macro Settings, and then click Disable all macros with notification.
Click OK in the Trust Center dialog box to apply the new setting. Click OK to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
When you have enabled the macro, it is recommended that you return the macro security setting to Disable all macros without notification.
If macro security is set to Disable all macros with notification, but you selected Disable when prompted by the macro warning dialog when you opened the file, use the following procedure to enable the macro.
In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
If macro security is set to Disable all macros except digitally signed macros, the macro may not have been digitally signed. Verify that you can trust the macro before using the following procedure to allow it to run.
In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box.
Close the file and the Microsoft Office program that you are using.
Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
Microsoft Office Outlook, Microsoft Office Visio, or Microsoft Office Publisher --
To check your macro security settings, on the Tools menu, click Trust Center, and then click Macro Security.
If macro security is set to No warnings and disable all macros, all macros are automatically disabled. Use the following procedure to enable the macro.
In the Trust Center dialog box, click Warnings for signed macros; all unsigned macros are disabled, and then click OK.
Close the file and the Microsoft Office program that you are using.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are using Visio, the Enable Content button appears as part of a Security Alert in the Document Information Bar. If you are not prompted to enable the macro, or if you receive this error again, the macro may not be digitally signed. Verify that you can trust the macro. If you are certain that you can trust the macro, use the next procedure below to enable the macro.
When you have enabled the macro, it is recommended that you return the macro security setting to No warnings and disable all macros.
If macro security is set to Warnings for signed macros; all unsigned macros are disabled, the macro may not be digitally signed. If you are certain that you can trust the macro, use the following procedure to enable the macro.
In the Trust Center dialog box, click Warnings for all macros, and then click OK.
Close the file and the Microsoft Office program that you are using.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are using Visio, the Enable Content button appears as part of a Security Alert in the Document Information Bar.
When you have enabled the macro, it is recommended that you return the macro security setting to Warnings for signed macros; all unsigned macros are disabled.
Microsoft Office Project --
To check your macro security settings, on the Tools menu, click Macro, and then click Security.
If macro security is set to Very High, use the following procedure to enable the macro.
In the Security dialog box, click High, and then click OK.
Close the file and Microsoft Office Project.
Open the file again. When prompted, click Enable Content to allow the macro to run. If you are not prompted to enable the macro, or if you receive this error message again, the macro may not be digitally signed. Verify that you can trust the macro. If you are certain that you can trust the macro, use the next procedure below to enable the macro.
When you have enabled the macro, it is recommended that you return the macro security setting to Very High.
If the macro security setting is set to High, the macro may not be digitally signed. If you are certain that you can trust the macro, use the following procedure to enable the macro.
In the Security dialog box, click Medium, and then click OK.
Close the file and Microsoft Office Project.
Open the file again. When prompted, click Enable Content to allow the macro to run.
When you have enabled the macro, it is recommended that you return the macro security setting to High.
This error may also occur for the following reasons:
The certificate of trust that is attached to the macro is invalid. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
The certificate is no longer trusted, was revoked by the issuing authority, or is damaged. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
Visual Basic for Applications (VBA) is not installed on your computer. In this case, no VBA macro can be run, regardless of whether the macro has a valid certificate of trust. You or your administrator may have chosen not to install VBA, or the version of Microsoft Office that you are using may not install VBA by default. If your version of Microsoft Office does not provide VBA as an installable feature, you can upgrade to a version that provides VBA support.
If you are unable to change the security settings, it is possible that another program has locked the security settings. Close all Microsoft Office System programs, then restart your program and change the security settings.
More information about this error message online.
خيلي ممنون :)
سلامنقل قول:
نوشته شده توسط mehdi_ok1
ببخشيد كه دير شد. يه چند روزي حالم خوش نبود.
متاسفانه راهي وجود نداره اما شما ميتوني يه فرمتي رو توي انتخابهايي كه word art gallery بهت ميده فرمتي رو انتخاب كني كه به راحتي بتوني به متن ساده تبديلش كني.
توي فايل PDF زير همه چي رو توضيح دادم.
[ برای مشاهده لینک ، با نام کاربری خود وارد شوید یا ثبت نام کنید ]
اميدوارم كارساز باشه.
نقل قول:
نوشته شده توسط balaghi
سلام
ممنون دوست من
اما به اين روش تمام اعداد انگليسي داخل متن هم فارسي ميشن؟ اين طور نيست؟