PDA

نسخه کامل مشاهده نسخه کامل : کمک..................فوریه فری!!!!!!!!



Mam.Q
20-07-2009, 11:42
سلام به همه دوستان
من دیروز بعد از اینکه یک گوشی رو فلش کردم سیستمم رو خاموش کردم ولی امروز که خواستم روشنش کنم 8تا بوق پشت سرهم زد وبعد از چند ثانیه 2تا بوق دیگه زد.نه مونیتور روشن شد ونه سیستم بالا اومد.....!!!!؟؟؟؟هر دفعه که خاموش روشن میکنم همینطور میشه.از دوستان خواهش میکنم در این مورد راهنمایی کنند...:18::41::19:

Mam.Q
21-07-2009, 01:45
کسی پیدا نشد که به داد ما برسه......؟؟؟؟

khark11
23-07-2009, 08:05
تو اين جور مواقع بهترين كار اينه كه كابل برق رو از پشت پاور جدا كني و باتري مادربورد رو بكشي بذاري 5 دقيقه تو همين حالت بمونه بعدش باتري رو وصل كني و برق رو هم وصل كني و روشن كني، اگه درست شد كه هيچ وگرنه بگو تا راه كارهاي ديگه اي هم بگم، فعلا اين اولين كاريه كه بايد بكني

Kianoosh
23-07-2009, 09:53
clear cmos و تنظیمات پیشفرض فنها می چرخن!؟ تست گرافیک و رم

Mam.Q
25-07-2009, 16:25
سلام
از دوستان گلم khark11 و arbabe.sayeha تشکر میکنم به خاطر این راهنمایی....
ولی هنوز همون مشکل رو دارم.فن ها هم روشن میشن ولی هنوز 8تا بوق بعد 2تا وبعدش یک بوق دیگه میزنه ودیگه هیچ کاری نمی کنه......؟؟؟؟:19:

khark11
27-07-2009, 09:22
مشخصات كامل سيستم و خصوصا مادربوردت رو بنويس تا ببينم اين بوق به چه معنيه!!

منتظرم

Kianoosh
27-07-2009, 12:27
اتصال پو رتهای یو اس بی و ...رو چک کردی؟مدل مین؟

Mam.Q
27-07-2009, 15:04
مشخصات كامل سيستم و خصوصا مادربوردت رو بنويس تا ببينم اين بوق به چه معنيه!!

منتظرم

سلام...
مادر برد: MSI P_Neo
سی پی یو: Intel celeron 2.4 GHz
گرافیک: Ati Radion 9200
رم: 256

Lord_theOne
27-07-2009, 18:57
قطعاتت را در بياور و دوباره بزن سرجاش با يك پارچه تميزشون كن ببين درست مي شود يا نه

khark11
28-07-2009, 06:44
سلام

اين كد مربوط ميشه به مشكلات ناشي از كارت گرافيك، اگه كامپيوترت گرافيك آنبرد داره كارت گرافيك اصلي رو در بيار و با گرافيك آنبرد تستش كن ببين درسته، اگه نداري هم از دوستات قرض بگير تست كن نتيجه رو بگو

khark11
28-07-2009, 06:46
اينم كدهاي بوق اين مادربورد :


Meaning of beeps in recent Award BIOS systems# of beepsMeaningHow to resolve the problem1 short beepPC is booting normally 2 short beepsCMOS problemReinitialise the CMOS by removing the BIOS stack and replacing it, or by moving jumper JP41 long beep / 1 short beepProblem with motherboard or RAMPlace RAM modules correctly in slot, test RAM or change it1 long beep / 2 short beepsProblem with graphics cardCheck that the graphics card is correctly placed in its slot. If need be, test with another video card.1 long beep / 3 short beepsProblem with keyboardCheck that the keyboard is correctly plugged in, and that no keys are depressed. If need be, test with another keyboard.1 long beep / 9 short beepsBIOS failureThe BIOS is invalid, replace it with a more recent version3 beepsBase 64K RAM failureRAM contains errors. Try reinserting it correctly or replacing it.4 beepsRefresh errorRAM is not refreshing correctly. Reset the refresh values in the BIOS or reset the BIOS.5 beepsProcessor errorCheck that the processor is correctly plugged in, and that the fan is working. If need be, change it.6 beepsProblem with keyboardCheck that the keyboard is correctly plugged in, and that no keys are depressed. If need be, test with another keyboard.8 beepsProblem with graphics cardCheck that the graphics card is correctly placed in its slot. If need be, test with another video card.Long incessant beepsRAM errorPlace RAM modules correctly in slot, test RAM or change itShort incessant beepsPower supply errorCheck that all power cables are correctly connected to the motherboard, test with another power supply, or change them
Meaning of beeps for an AMI BIOS# of beepsMeaningHow to resolve the problem1Refresh failure
RAM is not refreshing correctly. Reset the refresh values in the BIOS or reset the BIOS. Place RAM modules correctly in slot, or change them.2Parity Error
Place RAM modules correctly in slot, or change them. Test the RAM.3Base 64K RAM failure
Place RAM modules correctly in slot, or change them. If need be, update the BIOS.4System timer not operational
The motherboard must be sent for repairs.5Processor Error
Check that the processor is correctly plugged in, and that the fan is working. If need be, change it.6Gate A20 failure
Check that the keyboard is correctly plugged in, and that no keys are depressed. If need be, test with another keyboard.7Processor exception interrupt error
The motherboard must be sent for repairs.8Display memory read/write failure
Check that the graphics card is correctly placed in its slot. If need be, test with another video card.9ROM checksum error
The BIOS chip must be replaced or updated.10CMOS shutdown register read/write error
The motherboard must be sent for repairs.11Cache memory problem
Check that the processor is correctly plugged in, and that the fan is working. If need be, change it. Place the RAM modules correctly in their slots, or replace them.

khark11
28-07-2009, 06:56
اگه يه كار ديگه قبل از تست كارت گرافيك ميكردي بد نبود:

كابل ديتا و برق فلاپي رو هم جدا كن ببين چي ميشه!

Mam.Q
29-07-2009, 05:00
سلام دوست عزیز
مشکل حل شد...کارت گرافیکم سوخته بود.