مشاهده نسخه کامل
: كبريت
03-02-2006, 17:15
کدهای گوشی های موتارلو 6200 / 7500 / 8200 / 8400 / 8700 ;)
براي فعال كردن منوي مهندسي اين كد ها را كه در زير است بزنيد ( منظور از [pause] در كدهاي زير اين علامت است * ):
[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
براي از كار انداختن منوي مهندسي كدهاي زير را بزنيد ( منظور از [pause] در كدهاي زير اين علامت است * ):
[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
Works on 6200's,8200's,1-888's,7500's,8400's and GSM StarTacs
with later than version .27 software.
Options under Eng Field Options
Eng Field Options
Active Cell
RxLev -55Received powerlevel in dBm
NCC 0National Colour Code, used for identifying channel
BCC 7Broadcast Colour Code, also for identifying purposes
MSTxPwr 35Max allowed transmit power 35dBm about 3.2W
Time Adv xxxxxx is a number. Multiply this number by 550,and the result is the distance from the RBS (Radio Base Station), in meters.
Adjacent Cells
Adj Cell 1
Channel 0033Channel Number
RxLev -65Received powerlevel in dBm
BCCH DecodeI think it means it is able to decode thechannel information contained in the BCCH
RxLevAM -104Min allowed reception, compare with RxLev -65 and you get the C1 value which is 39 and reported back to base asmeasure of field strength.
MTxPwr 35 Aain max allowed powerlevel
C1 003 ??
NCC 0 National Colour Code
BCC 6 Broadcast Colour Code
System Parameters
Combined Off ??
AcsClas 0000 Allows different priorities - this network doesn't support it.
MCC 505 Mobile Country Code, 505 for Australia, 240 for Swedes etc
MNC 01Mobile Network Code, 01 for Mobilenet, 02 for Optus, 03 for Vodafone using MCC 505. MCC+MNC is often called Network Code
LAC 08720Location Area Code, shows which exchange your're in
CellID 00473Base Station Identity
T3212 005Time between periodic network updates (either hours between or time remaing until update, not sure)
BS-PA-MFRM 4 ??
XZQTY 14.3 ??
Motorola Flip Pinout:
ANT- (O) | | | | | | | | | |
10 9 8 7 6 5 4 3 2 1
Top of phone (screen)
1) Audio Ground
2) Ext b+
3) T Data
4) C Data
5) R Data
6) Logic Ground
7) Audio Out - on/off
8) Audio In
9) Manual Test
10) Battery Feedback
;)
براي فعال كردن منوي مهندسي اين كد ها را كه در زير است بزنيد ( منظور از [pause] در كدهاي زير اين علامت است * ):
[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
براي از كار انداختن منوي مهندسي كدهاي زير را بزنيد ( منظور از [pause] در كدهاي زير اين علامت است * ):
[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
Works on 6200's,8200's,1-888's,7500's,8400's and GSM StarTacs
with later than version .27 software.
Options under Eng Field Options
Eng Field Options
Active Cell
RxLev -55Received powerlevel in dBm
NCC 0National Colour Code, used for identifying channel
BCC 7Broadcast Colour Code, also for identifying purposes
MSTxPwr 35Max allowed transmit power 35dBm about 3.2W
Time Adv xxxxxx is a number. Multiply this number by 550,and the result is the distance from the RBS (Radio Base Station), in meters.
Adjacent Cells
Adj Cell 1
Channel 0033Channel Number
RxLev -65Received powerlevel in dBm
BCCH DecodeI think it means it is able to decode thechannel information contained in the BCCH
RxLevAM -104Min allowed reception, compare with RxLev -65 and you get the C1 value which is 39 and reported back to base asmeasure of field strength.
MTxPwr 35 Aain max allowed powerlevel
C1 003 ??
NCC 0 National Colour Code
BCC 6 Broadcast Colour Code
System Parameters
Combined Off ??
AcsClas 0000 Allows different priorities - this network doesn't support it.
MCC 505 Mobile Country Code, 505 for Australia, 240 for Swedes etc
MNC 01Mobile Network Code, 01 for Mobilenet, 02 for Optus, 03 for Vodafone using MCC 505. MCC+MNC is often called Network Code
LAC 08720Location Area Code, shows which exchange your're in
CellID 00473Base Station Identity
T3212 005Time between periodic network updates (either hours between or time remaing until update, not sure)
BS-PA-MFRM 4 ??
XZQTY 14.3 ??
Motorola Flip Pinout:
ANT- (O) | | | | | | | | | |
10 9 8 7 6 5 4 3 2 1
Top of phone (screen)
1) Audio Ground
2) Ext b+
3) T Data
4) C Data
5) R Data
6) Logic Ground
7) Audio Out - on/off
8) Audio In
9) Manual Test
10) Battery Feedback
;)