مشاهده نسخه کامل
: Hoom@n
11-07-2007, 16:28
من اومدم تا روی یه کامپیوتر پنتیوم سه یه wireless lan pci card نصب بکنم. اما وقتی درایور اون رو نصب کردم تو آخرین مرحله نوشته بود که the device cannot start (code 10) و من که به نماینده اونا زنگ زدم گفتش که ببین pci1 هست slot های کامپیوتر یا pci2 چون این فقط با pci2.1 و pci2.2 سازگار هست. اصلا امکان داره مشکل از جای دیگه ای باشه؟
(البته تو سایتش تو دیتاشیت مدل 8314 که کارت من هم همین مدل هست نوشته که attached interface: pci 2.2 و چیزی در مورد 2.1 نگفته. و تو مدل بعدی که 8315 هست هم گفته:interface:complaint with pci2.2 standard اما تو مدل 8316 که آخرین مدل اون سری هست نوشته interface:complaint with pci2.1/2.2 standard . من حدس می زنم که نماینده اون اشتباه کرده باشه و این مدل رو با مدل آخر اشتباه گرفته باشه. البته ممکن هم هست اینا سازگار باشن اما ننوشته باشه که بعیده)
ضمنا تو سایت مایکروسافت هم برای کد ده نوشته:
Code 10
If the device has a FailReasonString value in its hardware key, that string appears as the error message. The driver or enumerator puts this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message:
This device cannot start. (Code 10)
Recommended resolution
Device failed to start. Click Update Driver to update the drivers for this device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
Back to the top
Code 12
This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)
Recommended resolution
Two devices have been assigned the same I/O ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller is not an interrupt from the BIOS because of a corrupted Multiprocessor System (MPS) table).
You can use Device Manager to determine where the conflict is and disable the conflicting device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
مشکل از کجا هست و من چی کار باید بکنم.
(البته تو سایتش تو دیتاشیت مدل 8314 که کارت من هم همین مدل هست نوشته که attached interface: pci 2.2 و چیزی در مورد 2.1 نگفته. و تو مدل بعدی که 8315 هست هم گفته:interface:complaint with pci2.2 standard اما تو مدل 8316 که آخرین مدل اون سری هست نوشته interface:complaint with pci2.1/2.2 standard . من حدس می زنم که نماینده اون اشتباه کرده باشه و این مدل رو با مدل آخر اشتباه گرفته باشه. البته ممکن هم هست اینا سازگار باشن اما ننوشته باشه که بعیده)
ضمنا تو سایت مایکروسافت هم برای کد ده نوشته:
Code 10
If the device has a FailReasonString value in its hardware key, that string appears as the error message. The driver or enumerator puts this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message:
This device cannot start. (Code 10)
Recommended resolution
Device failed to start. Click Update Driver to update the drivers for this device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
Back to the top
Code 12
This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)
Recommended resolution
Two devices have been assigned the same I/O ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller is not an interrupt from the BIOS because of a corrupted Multiprocessor System (MPS) table).
You can use Device Manager to determine where the conflict is and disable the conflicting device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
مشکل از کجا هست و من چی کار باید بکنم.